One for All URC-4912 User guide

Download

Page 1

SONY

URC4912

ENGLISH 3 | DEUTSCH 7 | FRANÇAIS 11 |

ESPAÑOL 15 | PORTUGUÊS 19 | ITALIANO 23 |

NEDERLANDS 27 | DANSK 31 | NORSK 35 |

SVERIGE 39 | SUOMI 43 | ΕΛΛΗΝΙΚΑ 47 |

РУССКИЙ 51 | TÜRKÇE 55 | POLSKI 59 |

ČESKY 63 | MAGYAR 67 | БЪЛГАРСКИ 71 |

ROMÂNĂ 75 | SLOVENSKY 79 | HRVATSKI 83 |

AUDIO CODELIST93

2x AA

English: CAUTION: Risk of explosion if

battery is replaced by an incorrect type. Use quality Alkaline batteries.

Deutsch: WARNUNG: Es besteht Explosionsgefahr wenn die Batterie durch einen inkorrekten Typ ersetzt wird. Verwenden Sie Alkali- / Qualitätsbatterien.

Français: ATTENTION: Risque d’explosion si les piles sont remplacées par un mauvais type de piles. Utilisez des piles alcalines / de qualité.

Español: ADVERTENCIA: Riesgo de explosión si se cambian las pilas por un tipo de pilas incorrecto. Usar pilas alcalinas / de calidad.

Italiano: ATTENZIONE: Rischio di esplosione se le batterie vengono sostituite con un tipo di batterie errato. Usare batterie alcaline / di qualità.

Page 2

INPUT

POWER

0-9

EXIT

APP 1

APP 2 I

SLEEP

BACK

RED, GREEN, YELLOW, BLUE

VOL + / -

AUDIO

TEXT

APP 3

7 9

16 19

21 24 23

LIST

GUIDE

UP, DOWN,

LEFT,

RIGHT,

OPTIONS

HOME

LAST

PROG + / -

MUTE

HELP

SUB

REW, PLAY, FF, REC, PAUSE, STOP

DIGI/ ANALOG

FORMAAT

SYNC

Page 3

ENGLISH

1. INPUT

Input Select

2. POWER

Power

3. 0-9

Digits for Channel

Entry

4. EXIT

Menu Exit

5. TEXT

Teletext on

6. APP 1

YouTube / App

7. APP 2

Netix / App

8. APP 3

Google Play / App

9. I

Info

STEP 1: SET UP YOUR TELEVISION

THE MAJORITY OF NEWER SONY TV’S SHOULD WORK DIRECTLY.

After putting batteries in, just test some of the keys, and if they work, your remote is ready. If not, follow the next steps:

1. Make sure your TV is on (not on standby).

2. Hold down Red + Blue until the LED behind the

3. Point towards the TV and hold down the Power key

4. The remote will send a dierent Power signal every

5. The light will blink twice. Now test the rest of the keys on the remote, if

- If you nd some keys still do not work as expected (or at all), proceed to

and o

Shortcut Key

they work as your original did, your remote is ready to use. If you nd some keys do not work as expected (or at all), proceed to the next step.

the next step.

10. LIST

Title List

11. SLEEP

Sleep Timer

12. GUIDE Guide

13. UP, DOWN, LEFT, RIGHT, OK

Navigate the Menu

14. BACK

Back one level in

the Menu

15. OPTIONS

Options, Menu

16. HOME

Home

17. RED, GREEN, YELLOW, BLUE

Fastext

18. VOL + / -

Volume Up and

Down

Power Key blinks twice.

until the TV turns o

3 seconds. As soon as the TV turns o, let go of the

Power key.

19. LAST

Last Channel

20. PROG + / -

Channel Up and Down

21. MUTE

Mute

22. AUDIO

Audio / Language

23. SUB

Subtitles

24. HELP

Help

25. REW, PLAY, FF, PAUSE, REC, STOP

Playback control

26. FORMAT

Screen Format

27. DIGI/ANALOG

Digital / Analog

28. SYNC

Sync, Bravia Sync

Page 4

ENGLISH

STEP 2: IF STEP 1 DOES NOT WORK AS EXPECTED

ARE SOME KEYS NOT WORKING AS EXPECTED?

If you nd some keys do not work as expected (or at all), proceed to the next step.

1. Make sure your TV is on (not on standby).

2. Hold down RED + BLUE until the LED behind the

3. Point towards the TV and hold one of the keys that is

4. The remote will send a signal every 3 seconds.

5. When the correct function is shown on the screen (in this case the HOME),

let go of the key.

6. The LED will blink twice - your remote is ready to use.

LEARNING

LEARN A NEW FUNCTION TO YOUR REMOTE

Your One For All remote can learn any function from your original (working) remote.

Place the original remote facing the One For All remote on a at surface.

2. To learn: Hold down GREEN + YELLOW until the LED

3. Press 975. The LED will blink twice.

4. Press the key on the One For All remote you want to learn on,

5. Press the key on the Original remote you want to learn, for

6. Two blinks: ok. Repeat from step 4 for any more keys to learn. Long blink: try again from step 4.

7. When you have learned all the keys you need, press and hold

Power Key blinks twice

not working correctly (for example HOME). 

2 - 5 CM

blinks twice.

for Example: the VOL + key. The LED will blink rapidly.

Example: the VOL + key of your Audio Device

the OK key for 3 seconds. The LED will blink twice.

HOW TO DELETE A LEARNED FUNCTION

1. Hold down GREEN + YELLOW until the LED blinks twice.

2. Press 976.

3. Press the key to reset twice.

4. The LED ashes twice and the key will revert to the original function.

Page 5

ENGLISH

SOUND BAR / AUDIO RECEIVER VOLUME CONTROL

If you have your TV connected to a Sound Bar or Audio Receiver, it’s possible to set up your One For All remote to control the Volume and Mute of this device. There are two ways to do this:

AUDIO SIMPLESET

If you have a Sound Bar or Audio Device from one of the brands listed in the table below, you can use the SimpleSet method to program your remote to control it. If you do not have one of the below brands, please proceed to the next section.

Digit

Note that each of the brands has a digit associated with it, for example 4 for LG (and JVC).

To set up your remote to control your Sound Bar / Audio Device, rst make sure your TV and Sound Bar / Audio Device are both powered on, and that there is something playing that you can hear (this procedure will test the Mute function). Next:

1. Hold down the VOLUME UP and VOLUME DOWN buttons together until

the LED under the POWER key blinks twice.

2. Now point the remote towards your Sound Bar / Audio Devices and hold

down the digit key for your brand (for example 4 for LG). The remote will send the Mute function to your device every 3 seconds.

3. As soon as your Sound Bar / Audio Device mutes the volume, release the

digit key. The LED under the Power key will blink twice, and the Volume Up, Down and Mute keys should now control your Sound Bar / Audio Device.

Brand

Bose

Denon

Samsung / Harman/Kardon / JBL

LG / JVC

Marantz / Philips

Onkyo

Panasonic / Technics

Pioneer

Sony

Yamaha

AUDIO CODE SETUP

If your Sound Bar / Audio Device is not one of the brands listed above, you can also set up the remote to control it by entering a 4 digit code. The codes are listed in the Audio Codelist section of this manual, and are listed by brand and then popularity. Locate the brand of your Sound Bar / Audio Device in this code list and then the procedure is:

Page 6

ENGLISH

1. Hold down the VOLUME UP and VOLUME DOWN keys until the LED under

the Power key blinks twice.

2. Enter the rst 4 digit code for your Sound Bar / Audio Device.

The LED should blink twice on the last digit.

3. Now try the Volume Up, Down and Mute and see if they control your

Sound Bar or Audio Device.

4. If they work, your remote is set up. If not try again from step 1 using the

next code in the list.

POWER MACRO

If you have set up your Sound Bar or Audio Device using SimpleSet or Code Setup, you can now turn your TV and Audio Device both on and o using a single key. Simply hold down the Power key for 3 seconds and the remote will send the Power function to both the TV and the Audio Device / Sound Bar. If you press and release the key, it will only control the TV.

APP SHORTCUT KEYS

The One For All remote features three App Shortcut Keys which can be used to open apps on your TV. If your original remote control has a YouTube, Netix, or Google Play key, these keys will perform the same function.

However if you try these keys and they do not work, but your TV still has the ability to watch a streaming service, you can use this key as a shortcut by programming a macro (a series of button presses) on it. You could also program the keys to access other apps on your TV.

To program the macro, you rst need to know the sequence keys you use to access the service. For example, some TVs will start Netix by pressing the Home key, then Menu Right twice, and nally the Enter key. Once you have determined the sequence for the app you want on your TV, follow these steps:

1. Sit in front of your device with It switched on (not on standby)

Hold down the App Shortcut key until the LED blinks twice.

3. Now perform the sequence of keys exactly as would normally. The remote

will operate your TV and the macro is recorded in real time takes a few seconds for your device to react don’t worry.

4. Once you have nished the sequence - and the Streaming Service has

started on your device - hold down the App Shortcut key until the LED blinks twice and goes out. The macro is now stored.

Tips

• Make sure the OFA remote Is operating the TV before programming

• If you nd the Macro doesn’t work as expected, you can just repeat the same sequence to reprogram

• When programming, wait for your TV to respond rst, the remote will remember the timing

so if it normally

RESET

If you would like to reset your remote back to its default settings, please do the following:

1. Hold down the Green and Yellow keys until the LED blinks twice

2. Press 977

3. The LED will blink 4 times and the remote is now reset.

Page 7

AUDIO CODELIST

A.V.International 0269 Acoustic Solutions 1501, 1470 Agile 0269 Aiwa 0121, 0406, 0158,

0159 Akai 4242, 0609 Anam 0609 Andersson 0493 Arcam 0641, 0269, 0189 Argos 4122 AS 1501, 1470 Audio Agile 0269 Audio Pro 3264 Audiolab 0269, 0189 Auvisio 3654 AVI 0269 B & O 0799 Bang & Olufsen 0799 Bauhn 4242 Blaupunkt 3654 Bose 1229, 3708, 3079,

4024, 3832 Bush 4122 Cairn 0189 Cambridge Audio 1730, 1647, 4157,

4222 Canton 3000 Carver 0189, 0269 Celcus 4146 Coby 3654 Copland 0269 Curtis Mathes 0039 Denon 0004, 1360, 2857,

3347, 2516, 0272,

1260, 3380, 3639,

3947, 4111, 2681,

4551, 2502, 4025 Dicra 3654 DIKE 5070 Dual 4134 Dutch Originals 5070 Energy Sistem 3654 Epworth 0121, 0406, 0158,

0159 Goodmans 4146, 0609, 2151,

1199 Grundig 0189, 0269, 5174,

1199 Harman/Kardon 1304, 0110, 1004,

3756, 4197, 0189,

0269 HIFIAkademie 0269, 0189 Hitachi 4590, 3050, 5130,

1199 Horizon 4411 IKEA 4050 Inkel 0027 Insten 2151

Integra 1805, 2989, 2993,

1320, 3992, 0135 Jay-tech 4146 JBL 3756, 4575, 5070,

0110 JTC 4146 JVC 1400, 0074, 0464,

4411, 1199 Kenwood 0313, 0027, 1400 Kogan 3654 LG 2676, 4043, 4667 Linn 0269, 0189 Loewe 0269, 0189 Logik 4242 Logitech 2436, 1408, 3561 Magnat 4485 Magnavox 0189, 1269, 3282,

0269 Majority 4146 Marantz 2117, 0189, 0269,

4673, 0039, 0641,

1269, 3347, 4556 Maxell 3997 MCS 0039 Medion 4242 Meridian 0715 Micromega 0269, 0189 Musical Fidelity 0688 Myryad 0189, 0269 NAD 0320, 1093, 1743,

0609 Naim 1895 Nakamichi 3296 New Acoustic Dimension 0320, 1093, 1743,

0609 Nikko 0609 Nubert 4331 Onkyo 1805, 0135, 1320,

2989, 2993, 3050,

4533, 3992 Optimus 0300, 0013 Orbitsound 4098 Otone 4242 Panasonic 0309, 1779, 4007,

3425, 0308, 0367,

0039 Philips 1269, 0189, 2459,

4105, 3289, 2986,

1673, 0269, 3282,

0641 Philips Magnavox 0189 Pioneer 1935, 0013, 1459,

3742, 0300, 1284,

3629, 3631 Polk Audio 0269, 0189 Procient 0609 Proson 0609

Page 8

AUDIO CODELIST

Pyle 4242 Quasar 0039 RCA 0300, 1459, 0082 Restek 0189 Revox 0140, 0189, 0269 Rotel 0793 Samsung 2660, 2809, 1199,

2137, 3822, 1304 Sansui 0189, 0609 Sanyo 3282 Schaub Lorenz 4242 Sentra 0688 Sharp 3096, 5070 Siemens 0609 Sonos 3919 Sony 0158, 0159, 2522,

1758 Soundwave 0609 Sunre 0313 Sungpo 3096, 5070 T+A 2302, 1270

Teac 0609, 1199, 3253,

4242

Technics 0309, 0308, 0039,

0208 TechniSat 4134, 4486 Techwood 0609 Teufel 4051, 3296, 3574,

4477, 2322, 4159,

4460, 4559 Thomson 1194, 3654 Thorens 0269, 0189 Toshiba 3627, 5070 Universum 0609, 0269, 0189 Victor 0074 Wards 0013, 0158, 0189 Yamaha 0176, 1276, 2061,

2467, 3283, 2469,

0082, 0848, 1176,

1949, 0354, 3267,

3602, 2342

Connect with us

facebook.com/ @oneforall.worldwide linkedin.com/ youtube.com/

oneforallworldwide company/one-for-all-worldwide/ user/oneforallproducts

Universal Electronics BV – Europe & International P.O. Box 3332, 7500 DH Enschede The Netherlands

URC 4912 Sony:

SONY® is a registered trademark of SONY Corporation.

712178 RDN 1091120 Online version

One for All URC-4912 User guide

Specifications and Main Features

Frequently Asked Questions

User Manual