OMNIREL OM7608SC, OM7609SC, OM7610SC Datasheet

ISOLATED HERMETIC TO-258AA FIXED
VOLTAGE REGULATORS

Three T erminal, Fixed V oltage, 3.0 Amp
Precision Negative Regulators In Hermetic
JEDEC TO-258AA P ackage

FEATURES

• Isolated Hermetic Package, JEDEC TO-258AA Outline

• Ouput Voltages: -5V, -12V And -15V

• Output Voltages Set Internally To ±2% (±1% Available)

• Built-In Thermal Overload Protection

• Short Circuit Current Limiting

• Product Is Available Screened To MIL-STD-883

DESCRIPTION

These three terminal negative regulators are supplied in a hermetically sealed metal
package whose outline is similar to the industry standard TO-247 plastic package. All
protective features are designed into the circuit, including thermal shutdown, current
limiting and safe-area control. With heat sinking, they can deliver over 3.0 amps of
output current. These units feature ±2% initial voltage tolerance with ±1% available
on request.

OM7610SCOM7608SC

OM7609SC

ABSOLUTE MAXIMUM RATINGS @ 25°C

Input Voltage...................................................................-35V

Operating Junction Temperature Range.............................-55°C to +150°C

Storage Temperature Range .........................................-65° to +150°C

Typical Power/Thermal Characteristics:

Note: For ±1% device. add letter “A” in front of part number (e.g. OMA 7608SC).

4 11 R3
Supersedes 1 07 R2

Rated Power @ 25°C

TC........................................................................25W

TA.........................................................................3W

Thermal Resistance

qJC...................................................................3.5°C/W

qJA.....................................................................42°C/W

3.3 - 147

3.3

OM7608SC - OM7610SC

ELECTRICAL CHARACTERISTICS: -5 VOLT OUTPUT (OM7608SC) TJ= -55 C to + 125 C

Parameter Test Conditions Min. Typ. Max. Units

V

OUT

Line Regulation (Note 1) 8.0 V VIN 35 V, TJ= 25°C - 10 25 mV
Load Regulation (Note 1) 5.0 mA IO 3.0 A, TJ= 25°C - 20 75 mV
Thermal Regulation TA= 25°C, 20 mS Pulse - .002 .01 %/W
Ripple Rejection f = 120 Hz; V
Miminum Load Current VIN= 35 V - - 15 mA
Current Limit VIN= -13 V 3 4.3 - A
Temperature Stability -55°C T +150°C - - 2.0 %
RMS Output Noise (% of V

Note 1: Regulation is measured at a constant TJ. Changes in output due to heating must be taken into account separately.

Pulse testing with low duty cycle is used.

TJ= 25°C, VIN= 10 V, IO= 5.0 mA -4.90 -5.00 -5.10

8.0 V VIN 35 V, 5 mA IO 3 A; P 25 W -4.86 -5.00 -5.14

= 5.0 V - 66 - dB

OUT

)TA= 25°C, 10 Hz f 10 kHz - .005 - %

OUT

V

3.3

ELECTRICAL CHARACTERISTICS: -12 VOLT OUTPUT (OM7609SC) TJ= -55 C to + 125 C

Parameter Test Conditions Min. Typ. Max. Units

V

OUT

Line Regulation (Note 1) 15 V VIN 35 V, TJ= 25°C - 10 60 mV
Load Regulation (Note 1) 5 mA IO 3.0 A, TJ= 25°C - 40 90 mV
Thermal Regulation TA= 25°C, 20 mS Pulse - .002 .02 %/W
Ripple Rejection f = 120 Hz; V
Miminum Load Current VIN= 35 V - - 15 mA
Current Limit VIN= -20 V 3 4.3 - A
Temperature Stability -55°C T +150°C - - 2.0 %
RMS Output Noise (% of V

Note 1: Regulation is measured at a constant TJ. Changes in output due to heating must be taken into account separately.

Pulse testing with low duty cycle is used.

TJ= 25°C, VIN= 15 V, IO= 10 mA -11.76 -12.00 -12.24
15 V VIN 35 V, 5 mA IO 3 A; P 25 W -11.66 -12.06 -12.33

= 12 V - 66 - dB

OUT

)TA= 25°C, 10 Hz f 10 kHz - .005 - %

OUT

V

3.3 - 148