1 Getting started
2 Turning the power on/off
C-300 ZOOM
C-300 ZOOM
DIGITAL CAMERA
C-300 ZOOMC-300 ZOOM
D-550 ZOOM
D-550 ZOOM
D-550 ZOOMD-550 ZOOM
Quick start guide
We’ve included this convenient Quick start guide to show you basic functions and
techniques that will help you quickly master your new camera. For more detailed
descriptions of procedures, as well as for additional information on more sophisticated
features not covered here, please refer to the printed “Basic Manual”, or the primary
“Reference Manual” on the CD-ROM.
Package contents
Camera
Strap
AA (R6) alkaline batteries (4 pieces)
Video cable
USB cable
Basic manual
;
Quick start guide
Software installation guide (included in
the CD-ROM package)
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000
24/7 online automated help: http://support.olympusamerica.com/
Phone customer support: Tel. 1-888-553-4448 (Toll-free)
OLYMPUS OPTICAL CO. (EUROPA) GMBH.
Premises/Goods delivery: Wendenstrasse 14-18, 20097 Hamburg, Germany
Letters: Postfach 10 49 08, 20034 Hamburg, Germany
Printed in Japan
1AG6P1P1353-- VT367901
Tel. 040-237730
http://www.olympus.com/
CD-ROM with Windows 98 USB driver
software, Reference manual, and more.
Warranty card/Registration card (not
provided in some areas)
Safety Precautions (booklet)
SmartMedia
Static-free case
Index labels (2 pieces)
Write-protect adhesive seals (4 pieces)
SmartMedia instructions
Attaching the strap
Thread the short end of the strap through the
1111
strap eyelet.
2222
Thread the long end of the strap through the
loop that has already gone through the eyelet.
3333
Pull the strap tight, making sure that it is
securely fastened and does not come loose.
Strap
eyelet
Loading the batteries
Make sure that:
1111
The lens barrier
is closed.
The lamp on the right
of the viewfinder is off.
2222
Slide the battery compartment lock from
to .
Slide the battery compartment cover
3333
in the direction of (the direction
indicated by the mark on the
cover), and lift it up in the direction of .
4444
Insert the batteries, making sure that they are correctly oriented as
shown in the illustration.
There is a mark
showing the correct
way to insert the AA
batteries on the
bottom of the
camera.
When using CR-V3 lithium battery packsWhen using AA (R6) batteries
The monitor is off.
When using lithium
battery packs, insert
them so that the
“CAMEDIA” label on
each battery is
facing the lens side
of the camera.
Close the battery compartment cover in the
5555
direction of . While pressing the
mark, slide the cover in the direction of .
If the battery compartment cover seems hard to
close, do not force it. With the battery compartment
cover shut, press the mark firmly and push in
the direction shown in the illustration.
6666
Slide the battery compartment lock from to .
Inserting the card (SmartMedia)
1111
Make sure that:
The lens barrier
is closed.
The lamp on the right
of the viewfinder is off.
2222
Open the card cover.
3333
Insert the card as far as it will go in the
direction shown in the illustration.
There is an arrow inside the card cover, indicating
the direction in which the card should be inserted.
4444
Close the card cover securely until it clicks.
Removing the card
Hold the card with your fingertips and pull it out in the
direction of the arrow.
Never open the card cover, or remove the card or the batteries while the
camera is turned on. Doing so could destroy all data on the card. Destroyed
data cannot be restored.
The monitor is off.
When shooting pictures
Power on:
Open the lens barrier fully.
The camera turns on in the shooting
mode. The lens extends and the
flash pops up.
If the lens does not extend when the
lens barrier is opened, there is a
possibility that the cover is stuck in
the first click position.
Open the lens barrier until it clicks.
Power on Power off
Diopter adjustment dial
Power off:
Close the lens barrier slightly
until it just touches the lens
barrel.
Wait until the lens is fully retracted,
then close the lens barrier
completely.
The camera turns off. (The monitor
also turns off.)
Press the flash down until it locks
into place to close it.
When playing back pictures
Power on:
Press the (monitor) button
with the lens barrier closed.
The camera turns on in the playback
mode. The monitor turns on.
With the lens
barrier closed
• While looking through the viewfinder, turn the diopter adjustment dial until
the AF target mark is clearly visible.
• To save battery power, the camera automatically enters the sleep mode
after about 3 minutes of non-operation. If the monitor is on, it will
automatically turn off. The camera activates again as soon as you lightly
press the shutter button or zoom lever. Whenever possible, turn the
camera off when you do not intend to take any pictures for a while.
Power on Power off
Power off:
Press the (monitor) button.
The camera turns off (the monitor
turns off).
3 Shooting/Playback
Taking still pictures
Open the lens barrier fully.
1111
Slide the lens barrier fully open until it clicks.
The flash pops up and the lens extends.
2222
Position the AF target mark over the
subject in the viewfinder.
3333
Press the shutter button gently
(halfway).
The focus and exposure are locked when the green lamp
on the right of the viewfinder lights up. At this time the
sound of the focusing mechanism can be heard from inside
the camera, but no picture is being taken.
4444
Press the shutter button all the way (fully).
The camera takes the picture.
Playing back still pictures
Press with the lens barrier closed.
1111
The monitor turns on and displays the last picture taken.
2222
Press
3333
Press to cancel playback.
The monitor and camera
turn off.
.
Displays the
previous picture.
Jumps to the picture 10 frames ahead.
Orange lamp
AF target mark
Jumps to the picture 10 frames behind.
Green lamp
Displays the
next picture.
Recording movies
Open the lens barrier fully.
1111
The camera turns on in the shooting mode.
Press .
2222
The monitor turns on and the screen for selecting the shooting mode is displayed.
3333
Press to select MOVIE, then press
.
4444
Record the movie while observing your
subject on the monitor.
Press the shutter button fully to start recording.
Press the shutter button fully again to stop
recording.
MOVIE
SELECt
Playing back movies
Press with the lens barrier closed.
1111
The monitor turns on.
2222
Press to display the desired picture with the indicator,
then press .
The top menu is displayed.
3333
Press to select MOVIE PLAY.
4444
5555
Press
The movie is played back after the orange lamp on the right of the viewfinder
blinks and the camera accesses the movie data. When the movie reaches the
end, the display returns automatically to the beginning of the movie.
Press to display the MOVIE
PLAYBACK menu. Then select the
desired operation and press .
PLAYBACK : Plays back the entire
FRAME BY FRAME : Plays back the movie
EXIT : Leaves the movie playback mode.
to select MOVIE PLAYBACK.
movie again.
manually one frame at a
time.
MOVIE%PLAYBACK
PLAYBACK
FRAME%BY%FRAME
EXIt
SELECt
GO
GO
4 Protecting pictures (Protect)
You are recommended to protect important pictures to avoid accidentally erasing
them.
1111
Press with the lens barrier closed.
The monitor turns on.
2222
Press
3333
Press , then press .
The mode menu is displayed.
4444
Press to select the PLAY tab, then press .
5555
Press to select , then
press .
6666
Press to select ON, then
press .
The selected picture is protected.
To close the menu, press again.
• The indicator is displayed at the top right of the protected picture.
• Protection on each picture remains even when the camera is turned off.
• Protected pictures cannot be erased by the single-frame/all-frame erase
function, but they can be all erased with the format function.
• Protection cannot be applied to pictures stored on a card with a writeprotect seal.
to select the picture you want to protect.
PLAY
CARDSEt EDIt
OFF
PLAY
CARDSEt EDIt
ON
5 Erasing pictures
Single-frame erase
Press with the lens barrier closed.
1111
The monitor turns on.
2222
Press
3333
Press .
The top menu is displayed.
4444
Press to select ERASE.
5555
Press to select YES, then
press .
The picture is erased and the menu is closed.
• Erasure is not possible if the picture you want to erase is protected or a
write-protect seal is attached to the card. Before erasing, unprotect the
picture or remove the write-protect seal from the card.
• Once erased, pictures cannot be restored. Check each picture before
erasing to avoid accidentally erasing pictures you want to keep.
to select the picture you want to erase.
INFO
SELECt
MODE%MENU
ERASE
ERASE
YES
NO
GO
Names of parts Using the menus and tabs
Shortcut menus
Shutter button
Zoom lever
Lens barrier
Turns the camera
on and off in the
shooting mode.
Card cover
Diopter
adjustment dial
Viewfinder
Monitor
Self-timer lamp
DC-IN jack
AF target mark
Battery compartment lock
Battery
compartment cover
Flash
Pops up when you
open the lens barrier.
Lens
Extends automatically
when you open the
lens barrier.
VIDEO OUT jack
Connector cover
USB connector
Orange lamp
Green lamp
Arrow pad
button
(Monitor) button
Turns the camera on and
off in the playback mode.
Turns the monitor on and
off in the shooting mode.
Tripod socket
(OK/Menu)
When you turn on the camera and press , the top menu is displayed on the
monitor. The functions of this camera are set from the menus.
Press .
The top menu is displayed.
ESP/
MODE MENU
Select each menu using
the arrow pad.
Shortcut Menus
• Let you quickly access the most
frequently used menu settings.
• Display operational buttons at
the bottom of the screen, and let
you select items by pressing
.
• Lets you access the menu
• Categorizes the settings into 4 tabs.
• Displays the CAMERA,
Mode Menu
selections to set the ISO
sensitivity, white balance, etc.
PICTURE, CARD and SETUP
tabs. Select the desired tab on
the left of the screen by pressing
.
3:2 1984*1312
SHQ 1984*1488
HQ 1984*1488
SQ 1024*768
CANCEL
SELECt
Tabs
GO
DRIVE
CAMERA
ISO
DIGItAL ZOOM
PANORAMA
CARDSEt PIC
2 IN 1
Shooting mode
When the still picture
shooting mode is selected
ESP/
MODE MENU
ESP/
Selects the area of the image that will be used to determine exposure or image
brightness from the two available settings:
ESP or (spot metering).
Selects the resolution and the quality of the image.
Still picture : 3:2, SHQ, HQ, SQ, TIFF
Movie : HQ, SQ
Adjusts the brightness of the image (Exposure compensation).
When the movie recording
mode is selected
ESP/
MODE MENU
Playback mode
When a still picture is
played back
INFO
MODE%MENU
ERASE
Displays all recorded pictures in slideshow fashion.
MOVIE PLAY
MOVIE PLAYBACK Plays back a movie.
INDEX Creates an index picture of a movie in 9 frames.
EDIT Edits a movie.
INFO
Displays all the shooting information on the monitor.
ERASE
Erases a selected picture.
When a movie is played
back
MOVIE%PLAY
INFO
MODE%MENU
ERASE
How to use the menus Mode menus
1111
Press to display the
top menu, then press
Top menu
ESP/
MODE MENU
2222
.
tab, then press
to
display the menu.
CAMERA tab
DRIVE
CAMERA
ISO
DIGItAL ZOOM
PANORAMA
CARDSEt PIC
2 IN 1
Press to select a
3333
Press to select the
desired item, then press
to display the available
setting selections.
DRIVE
CAMERA
ISO
DIGItAL ZOOM
PANORAMA
CARDSEt PIC
2 IN 1
4444
Press to
select the setting.
Press to complete
the setting.
To return to select a
PICTURE tab
CAM
PICtURE
CARDSEt
tab, press
WB
.
DRIVE
CAMERA
ISO
DIGItAL ZOOM
PANORAMA
CARDSEt PIC
2 IN 1
or
DRIVE
CAMERA
ISO
DIGItAL ZOOM
PANORAMA
CARDSEt PIC
2 IN 1
AUtO
100
200
400
The green frame moves
To return to
select an item,
press or
.
DRIVE
CAMERA
ISO
DIGItAL ZOOM
PANORAMA
CARDSEt PIC
2 IN 1
AUtO
100
200
400
CARD tab
CARD%SEtUP
CAM
PIC
CARD
SEt
to the selected item.
To close the menu,
press again.
SETUP tab
ALL RESEt
CAM
PIC
REC VIEW
CARD
FILE NAME
SEtUP
PIXEL MAPPING
If you want to save the settings after the camera is turned off,
set ALL RESET to OFF.
Mode menu functions are categorized into 4 tabs. Use to select a tab
and display the respective functions.
Shooting mode
CAMERA tab
PICTURE tab
CARD tab
SETUP tab
CAMERA tab
DRIVE
ISO Selects the ISO sensitivity from AUTO, 100, 200, 400.
DIGITAL ZOOM
PANORAMA
2 IN 1
PICTURE tab
WB
CARD tab
CARD SETUP Formats a card.
SETUP tab*
REC VIEW
FILE NAME Changes how file names are assigned.
PIXEL MAPPING Checks the CCD and image processing functions.
* Refer to the playback mode instructions for details of ALL RESET, , , and
settings.
DRIVE
CAMERA
ISO
DIGItAL ZOOM
PANORAMA
CARDSEt PIC
2 IN 1
Selects the shooting mode from
(Normal shooting),
(Sequential shooting),
(AF Sequential shooting).
Extends the maximum optical zoom, making possible up
to approximately 10x zoom shooting with the digital zoom
function.
Allows panorama pictures to be taken with Olympus
CAMEDIA-brand SmartMedia cards.
Lets you combine two still pictures taken in succession
into one picture.
Sets the appropriate white balance according to the light source.
Adjusts the sharpness of images.
Adjusts the contrast of images.
Selects whether to display pictures on the monitor while
saving them.
Playback mode
PLAY tab
EDIT tab
CARD tab
SETUP tab
PLAY tab
EDIT tab
BLACK & WHITE Creates black and white pictures.
SEPIA Creates sepia-toned pictures.
CARD tab
CARD SETUP
SETUP tab
ALL RESET
PLAY
CARDSEt EDIt
Protects pictures from accidental erasure.
Rotates pictures 90 degrees clockwise or counterclockwise.
Stores printing information required for DPOF printers on the
card.
Makes the file size smaller.
Creates a cropped picture from the enlarged part of a picture.
Formats a card.
Erases all image data stored on the card.
Selects whether to save the current camera settings when
you turn off the power.
Turns the beep sound (used for warnings, etc.) on and off.
Selects the number of frames in the index display.
Adjusts the brightness of the monitor.
Sets the date and time.