C-2500L
C. ADJUSTMENT METHOD
[ 1 ] List of Adjustment Items.......................................................... C-2
1. List.................................................................................................C-2
2. Installation of adjustment software............................................C-2
[ 2 ] Adjustment method.................................................................. C-4
1. Adjustment screen...................................................................... C-4
2. Copy from EEPROM to FLASH memory ....................................C-4
3. Flash Charge Adj.........................................................................C-5
4. AF Illuminator Adj........................................................................C-5
[ 3 ] DATA Display............................................................................ C-5
SERVER_DIS C-1 Ver.1.0
C.ADJUSTMENT METHOD C-2500L
[ 1 ] List of Adjustment Items
1.List
1-1 List
Adjustment Items Adjustment Operations
Adjustment Timing for replaced parts
Lens-
CCD
Unit
Main
#-2
ST
C.B.A.
G#-2
Cover
Front
G#
Copy from EEPROM to FLASH
memory
Flash Charge Adj
AF Illuminator Adj
1-2.Adjustment Timing
Items Adjustment Timing
Copy from EEPROM to FLASH
memory
Flash Charge Adj
AF Illuminator Adj
2. Installation of adjustment software
2-1.PC condition
¡ ¡
¡ ¡ ¡
¡ ¡
After assembling SW FPC G#-3
After assembling Upper Cover G#-3 and
Before assembling Grip #
After assembling all , remove L Under Cover
1)Pentium-equipment DOS/V computer (IBM PC/AT)
2)Windows 95
3)RS232C
2-2.Method of installation
Run “Set up . exe” in Floppy Disk.
(The software is installed in folder “ C:¥DI¥C-2500LVB” )
2-3.Method of start
Run “C-2500L_VB.exe” in folder “ C:¥DI¥FL-40”.
SERVER_DIS C-2 Ver.1.0
C-2500L C.ADJUSTMENT METHOD
[ 2 ] Adjustment Method
1. Adjustment screen
Main menu Data Display menu
2. Copy from EEPROM to FLASH memory
EEPROM Data
COPY to FLASH
Memory
[DATA COPY]
Click
Note1) Before adjusting, take off main batteries
and lithium battery.
Note2) After adjusting, not power off
but take off AC adapter.
EEPROM data
is automatically
written into
FLASH Memory
[EEPROM
DATA
COPY OK]
YES
END
NO
Ver.1.0 C-3 SERVER_DIS
3. Flash Charge Adj
C.ADJUSTMENT METHOD C-2500L
Flash Charge
Adj
POWER ON
[Adjustment Value
READ]
Click
[Firing Light]
Click
Firing Light
< Fig-1> Note) Short when
powering on.
Fig-1
Fig-2
< Fig-2 >
< Fig-3 >
YES
Measured
Voltage=330+/-3[v]
Measured
Voltage < 327[V]
Measured
Voltage > 333[V]
[ OK ]
Click
NO
NO
Fig-3
YES
YES
Fig-4
[ > ]
Click
< Fig-4 > < Fig-5 >
Fig-5
[ < ]
Click
END
SERVER_DIS C-4 Ver.1.0
C-2500L C.ADJUSTMENT METHOD
3. AF Illuminator Adj
AF Illuminater
Adj
AF Illuminater Adj
CHART SET
(1.0m)
CAMERA SET
Adjust focus mark
in finder to gray
circle on chart
[AF LED ON]
Click
<FIG-1>
AF Illuminater
Light
Fig-1
Adjust center of AF
illuminator to circle of
[C-2500L]
[AF LED OFF]
Click
END
[ 3 ] DATA Display
Display
EEPROM Data
Read
FLASH Memory
Data Read
EEPROM Adj
FLASH Memory Adj
Save FLASH Memory Adj to harddisk in PC
FILE MANE
DATA SAVE
DATA READ
Ver.1.0 C-5 SERVER_DIS
AF Illuminater Adj. CHART
C-2500L / FL-40
FL-40
C-2500L
Ver. 1.0
Loading...