Olympus C-1-D-100 User Manual

Using the Flash

Shooting a Close Subject

(at 10 cm ~ 0.5 m/0.4 in ~ 1.6 ft)

Using the Macro Mode

Viewing Pictures

E
N
D

1. Open the lens barrier.

Slide the lens barrier until it clicks to turn on the camera.

2. Press the OK/menu button.

The monitor shows the shooting mode menu.

OK/menu button

s

s

e

r

P

Arrow pad Monitor

Displayed menu

1/3

SELECT

AUTO

OFF
OFF
OFF

END

OK

3. Select by pressing the or arrow pad key.

The default setting is Auto-Flash.

1/3

SELECT

AUTO

OFF
OFF
OFF

END

OK

4. Each time you press the or arrow pad key, the flash mode changes:

Auto-Flash ➔
Scene ➔

Note: For the function and effect of each flash mode, refer to Page

56 of the camera’s Instructions.

Red-Eye Reduction Flash ➔ Fill-In Flash ➔ Night

Flash Off. Select one of these modes.

1/3

AUTO

Display
changes as

key is pressed

5. When you have made your selection, press the OK/menu button.

The desired flash mode is set

VT2 59102

1. Open the lens barrier.

Slide the lens barrier until it clicks to turn on the camera.

2. Press the OK/menu button.

The monitor shows the shooting mode menu.

OK/menu button

s

s

e

r

P

1/3

SELECT

Arrow pad

3. Select by pressing the or arrow pad key.

1/3

SELECT

AUTO

OFF
OFF
OFF

END

OK

4. Select “ON” by pressing the or arrow pad key.

5. When you have made your selection, press the OK/menu

button to enter the Macro mode.

Note: The macro mode is

automatically
canceled when the
camera is turned off.

When you want to
cancel shooting,
close the lens
barrier.

AUTO

OFF
OFF
OFF

END

1. Make sure the lens barrier is closed.

Using this camera for the first time

START

QUICK START

If the lens barrier is open,

Lens barrier

slide it to close.

2. Press and hold the monitor button for a moment.

The last picture you took appears on the monitor.

s

s

e

r

OK

P

Arrow pad

Monitor button

Monitor

3. To view other images, press the or arrow pad key.

OLYMPUS OPTICAL CO., LTD.

(Customer support) Tel. [phone] Tokyo

http://www.olympus.co.jp

OLYMPUS AMERICA INC.

(Technical support) Tel. [phone] distec @ Olympus

http://www.olympus.com

(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.

http://www.olympus-europa.com

When you want to cancel viewing, press the monitor
button again.

San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan.

Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. [phone]

OLYMPUS OPTICAL CO. (EUROPA) GMBH.

(Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany. Tel. [phone]

GUIDE

Checking the Package Contents Shooting Pictures

C

R

-

V

3

x

1

o

r

L

R

6

x

2

C

R

-

V

3

x

1

o

r

L

R

6

x

2

C

R

-

V

3

x

1

o

r

L

R

6

x

2

Attaching the Provided Strap

Loading the Battery and Card

(SmartMedia)

First make sure that all the provided accessories listed below are
included in the package. If anything is missing or damaged, contact

your local Olympus representative immediately.

Camera CD-ROM CR-V3 lithium battery pack

USB cableVideo cableStrap

SmartMedia (8 MB)

Write-protect seals for
SmartMedia (4 pieces)

Static-free case for
SmartMedia

Labels for SmartMedia (2 pieces) SmartMedia Instructions

Basic Manual/Warranty/
Quick Start Guide (this publication)

1. Attach the strap as shown.

Strap eyelet

1. Make sure the lens barrier is closed.

Card cover

Battery compartment cover

2. Slide the battery compartment

cover in the
direction of the
arrow q,
and lift the
cover in the
direction of
the arrow w.

3. Insert the battery in the direction

shown in the
figure.

4. Close the battery compartment

cover in the direction
of the arrow q,
and press the
cover in the
direction of
the arrow w
unti it clicks.

1. Open the lens barrier.

Slide the lens barrier until it clicks to turn on the camera.

Lens barrier

If the lens barrier is open,
slide it to close.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

5. Open the card cover.

2. Hold the camera, and look through the

viewfinder.

3. Press the shutter button halfway (half-press) to make sure the green lamp on

the right of the viewfinder lights.

When lit: The subject is in focus. You can shoot.
When blinking: The subject is out of focus. Half-press the shutter button

6. Insert the card as far as it will go in

the direction
shown
in the figure.

Be sure to hold the card so that the cut
corner is positioned correctly. There is
an arrow inside the card cover,
indicating the insertion direction.

7. Close the card cover until it clicks.

Note:

To remove the
card, hold the
card with your
fingertips, and
pull it out in the
direction of the

.

arrow

4. Press the shutter button all the way (full-press) to take the picture.

The shutter is released and the picture is
taken.

Once the picture has been taken, it is
displayed on the monitor for a

short time.

Viewfinder

Lens barrier

again.

Green lamp

Monitor