Nokia BH 102 - Headset - Over-the-ear, HS-107W User Manual

Nokia Bluetooth Headset BH-102

1

8

2

3

44
4

5

4

6

11

9

7

10

Issue

1

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares
that this HS-107W product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. A
copy of the Declaration of Conformity
can be found at http://www.nokia.com/
phones/declaration_of_conformity/.

Nokia operates a policy of ongoing
development. Nokia reserves the right to
make changes and improvements to any
of the products described in this
document without prior notice.

To the maximum extent permitted by
applicable law, under no circumstances
shall Nokia or any of its licensors be
responsible for any loss of data or
income or any special, incidental,
consequential or indirect damages
howsoever caused.

© 2008 Nokia. All rights reserved.
Nokia and Nokia Connecting People are

registered trademarks of Nokia
Corporation. Other product and
company names mentioned herein may
be trademarks or tradenames of their
respective owners.

Reproduction, transfer, distribution, or
storage of part or all of the contents in
this document in any form without the
prior written permission of Nokia is
prohibited.

Bluetooth is a registered trademark of
Bluetooth SIG, Inc.

The contents of this document are
provided "as is". Except as required by
applicable law, no warranties of any
kind, either express or implied,
including, but not limited to, the implied
warranties of merchantability and
fitness for a particular purpose, are
made in relation to the accuracy,
reliability or contents of this document.
Nokia reserves the right to revise this
document or withdraw it at any time
without prior notice.

The availability of particular products
may vary by region. Please check with
your Nokia dealer for details.

2

2

© 2008 Nokia. All rights reserved.

Export controls

laws and regulations from the US and
This device may contain commodities,
technology or software subject to export

Introduction

With the Nokia Bluetooth Headset
BH-102, you can make and receive
calls while on the move. You can
use the headset with compatible
phones that support Bluetooth
wireless technology.

Read this user guide carefully
before using the headset. Also,
read the user guide for your phone.

other countries. Diversion contrary to

law is prohibited.

devices without cables. The phone

and the headset do not need to be

in line of sight, but they should be

within 10 metres (33 feet) of each

other. Connections may be subject

to interference from obstructions,

such as walls, or other electronic

devices.

The headset complies with the
It provides important safety and
maintenance information. Keep
the headset out of the reach of
small children.

Bluetooth wireless
technology

Bluetooth wireless technology
allows you to connect compatible

© 2008 Nokia. All rights reserved. 3

Bluetooth Specification 2.0 + EDR

that supports the Headset Profile

1.1 and Hands-Free Profile 1.5.

Check with the manufacturers of

other devices to determine their

compatibility with this device.

Get started

The headset contains the
following parts shown on the title
page: earloop (1), charger
connector (2), earpiece (3), blue
indicator light (4), multifunction
key (5), and microphone (6).

Before using the headset, you
must charge the battery and pair
the headset with a compatible
phone.

Parts of the device are magnetic.
Metallic materials may be attracted
to the device. Do not place credit
cards or other magnetic storage
media near the device, because
information stored on them may be
erased.

Chargers

following chargers: AC-3, AC-4,

AC-5, and DC-4.

Warning: Use only
chargers approved by

Nokia for use with this
particular enhancement. The use of
any other types may invalidate any
approval or warranty, and may be
dangerous.

When you disconnect the power cord
of any enhancement, grasp and pull
the plug, not the cord.

Charge the battery

Before charging the battery,
carefully read “Battery

information”.

1. Connect the charger to a wall

outlet.

This device is intended for use when
supplied with power from the

4

4

2. Connect the charger cable to

the charger connector (8). The
indicator light is on during

© 2008 Nokia. All rights reserved.

charging. Charging the battery

To switch off, press and hold the

fully may take up to 2 hours.

3. When the battery is fully
charged, the indicator light
turns off. Disconnect the
charger from the headset and
the wall outlet.

The fully charged battery has
power for up to 10 hours of talk
time or up to 250 hours of standby
time.

When battery power is low, the
headset beeps once every minute
and the indicator light flashes
quickly.

multifunction key for about 4 to 8
seconds.

Pair the headset

1. Ensure that your phone is
switched on and the headset is
switched off.

2. Press and hold the
multifunction key (for about 4
to 8 seconds) until the
indicator light starts to flash
quickly.

3. Activate the Bluetooth feature
on the phone, and set the
phone to search for Bluetooth

Switch on or off

To switch on, press and hold the
multifunction key for about 2 to 4
seconds. The headset beeps, and
the indicator light is displayed. The
headset tries to connect to a
paired device.

© 2008 Nokia. All rights reserved. 5

devices.

4. Select the headset from the list
of found devices.

5. Enter the passcode 0000 to
pair and connect the headset to
your phone. In some phones,
you may need to make the

connection separately after

menu where you can view the
pairing. You only need to pair
the headset with your phone
once.

If the pairing is successful, the
headset appears in the phone

Basic use

Put on the headset

To use the headset on your right
ear, attach the earloop as shown in
Figure 7; to use the headset on
your left ear, attach the earloop
from the other side. Slide the
earloop over your ear (9), and
gently push the earpiece into your
ear. Point the headset towards
your mouth (10).

currently paired Bluetooth

devices.

When the headset is connected to

your phone and is ready for use,

the indicator light flashes slowly.

Call handling

To make a call, use your phone in

the normal way when the headset

is connected to your phone.

To redial the number you last

called (if your phone supports this

feature with the headset), when

no call is in progress, press the

multifunction key twice.

To activate voice dialling (if your

6

6

phone supports this feature with

the headset), when no call is in

progress, press and hold the

© 2008 Nokia. All rights reserved.

multifunction key for about 2 to 4

and press and hold the

seconds. Proceed as described in
the phone user guide.

To answer or end a call, press the
multifunction key. To reject a call,
press this key twice.

To adjust the volume during a call,
use the phone volume keys.

To switch a call between the
headset and a compatible phone,
press and hold the multifunction
key for about 2 to 4 seconds.

Clear settings or reset

To delete the pairings from the
headset, switch off the headset,

multifunction key for over 8

seconds until the headset beeps

twice and the indicator light

flashes quickly.

To reset the headset if it stops

functioning, even though it is

charged, plug the headset into a

charger.

Troubleshooting

If you cannot connect the headset

to your compatible phone, check

that the headset is charged,

switched on, and paired with your

phone.

Battery information

This device has an internal,
nonremovable, rechargeable battery.
Do not attempt to remove the battery
from the device as you may damage
the device. The battery can be

charged and discharged hundreds of

times, but it will eventually wear out.

Recharge your battery only with

Nokia approved chargers designated

for this device. Use of an unapproved

© 2008 Nokia. All rights reserved. 7

charger may present a risk of fire,

Battery performance is particularly

explosion, leakage, or other hazard.
If a battery is being used for the first

time or if the battery has not been
used for a prolonged period, it may be
necessary to connect the charger,
then disconnect and reconnect it to
begin charging the battery. If the
battery is completely discharged, it
may take several minutes before the
charging indicator light is displayed.

Unplug the charger from the
electrical plug and the device when
not in use. Do not leave a fully
charged battery connected to a
charger, since overcharging may
shorten its lifetime. If left unused, a
fully charged battery will lose its
charge over time.

limited in temperatures well below

freezing.

Do not dispose of batteries in a fire as

they may explode. Batteries may also

explode if damaged.

Never use any charger that is

damaged.

Important: Battery talk
and standby times are

estimates only and
depend on network conditions,
features used, battery age and
condition, temperatures to which
battery is exposed, and many other
factors. The amount of time a device
is used for calls will affect its standby
time. Likewise, the amount of time
that the device is turned on and in

Always try to keep the battery
between 15°C and 25°C (59°F and
77°F). Extreme temperatures reduce
the capacity and lifetime of the
battery. A device with a hot or cold
battery may not work temporarily.

8

8

the standby mode will affect its talk
time.

© 2008 Nokia. All rights reserved.

Care and maintenance

Your device is a product of superior
design and craftsmanship and should
be treated with care. The following
suggestions will help you protect
your warranty coverage.

• Keep the device dry. Precipitation,
humidity, and all types of liquids
or moisture can contain minerals
that will corrode electronic
circuits. If your device does get
wet, allow it to dry completely.

• Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can
be damaged.

• Do not store the device in hot
areas. High temperatures can
shorten the life of electronic
devices, damage batteries, and

its normal temperature, moisture
can form inside the device and
damage electronic circuit boards.

• Do not attempt to open the
device.

• Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.

• Do not use harsh chemicals,
cleaning solvents, or strong
detergents to clean the device.

• Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.

If the device is not working properly,
take it to the nearest authorised
service facility for service.

warp or melt certain plastics.

• Do not store the device in cold
areas. When the device returns to

© 2008 Nokia. All rights reserved. 9