A copy of the installation and operating instructions to be furnished the user. A draft copy of the
instructions may be submitted if the actual document is not available. The actual document shall
be furnished to FCC when it becomes available.
Alcatel-Lucent (Euronext Paris and NYSE: ALU) provides solutions that enable service
providers, enterprises and governments worldwide, to deliver voice, data and video
communication services to end-users. As a leader in fixed, mobile and converged broadband
networking, IP technologies, applications, and services, Alcatel-Lucent offers the end-to-end
solutions that enable compelling communications services for people at home, at work and on
the move. For more information, visit Alcatel-Lucent on the Internet: www.alcatel-lucent.com
Notice
The information contained in this document is subject to change without notice. At the time
of publication, it reflects the latest information on Alcatel-Lucent’s offer, however, our
policy of continuing development may result in improvement or change to the specifications
described.
Trademarks
The following trademarks are used throughout this document:
Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and
service marks of Alcatel-Lucent, Alcatel and Lucent Technologies.
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
Figure 4 -TD-RRH8X20-25 mounted on a pole................................................................................10
Figure 5 -TD-RRH8X20-25 with solar shield ..................................................................................12
LIST OF TABLES
Table 1 - TD-RRH8X20-25 Main Characteristics...............................................................................9
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
4 / 20
Page 7
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
1INTRODUCTION
1.1Overview
This document provides an overview and describes the characteristics of the TD-LTE Remote
Radio Head TD-RRH8X20-25 using 3GPP bands 41 (working band 2496 up to 2690MHz).
The content of this document is not a commitment from Alcatel-Lucent. Alcatel-Lucent
reserves the right to change the technical specifications without notice until General
Availability of the product. For more information on features availability, please refer to the
Product Bulletins, Feature Planning Guides, Baseline and Release Notes.
1.2Scope of this Document
The scope of this document is the Product Description for Alcatel-Lucent TD-RRH8X20W
2500MHz
Other RRH products are available from Alcatel-Lucent’s portfolio. In addition, there will
further extensions to the portfolio in future releases.
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
5 / 20
Page 8
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
2TD-RRH8X20-25 SOLUTION OVERVIEW
2.1Overview
The Alcatel-Lucent distributed solution is composed of two main parts:
xThe Alcatel-Lucent Base Band Unit
xThe Alcatel-Lucent TD-RRH8X20-25, located locally or on a remote site: TD-RRH8X20-25
provides the RF transceiver, PA and filter functions typically found in the conventional Node B.
Figure 1 – Alcatel-Lucent TD-RRH8X20-25 Product
These two equipments are linked by optical fibres, carrying downlink and uplink base band
digital signals along with OAM information.
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
6 / 20
Page 9
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
Local Site
Optical Interface
BBU
Remote Site
RRH8x20-25
Optical fibre
Figure 2 – TD-RRH8X20-25 System Overview
(Star Configuration Supported From BBU)
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
7 / 20
Page 10
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
3TD-RRH8X20-25 PRODUCT DESCRIPTION
3.1Overview
The RRH includes:
xEight (8) 2500MHz transmit paths of up to 20W per path
xEight (8) receive paths
xEight (8) Broadband Power Amplifiers of 196MHz bandwidth each
xThree (3) fibre interfaces carrying downlink and uplink base band signals, as well as OAM
information and timing signal
xAn AISG controller supporting Remote Electrical Tilt via the calibration port (OOK signal) or
the AISG port (RS485 signal)
xA PSU (power supply unit) converting the input voltage into the target voltage for the
different internal units.
Figure 3 - TD-RRH8X20-25 Functional Architecture
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
8 / 20
Page 11
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
3.2Main Characteristics and Technical Data
TD-RRH8X20-25 main characteristics are summarized in the following table:
dimensions
Sizes (HxWxD)645 x 445 x 145 mm
Temperature range-40ºC to +55ºC
Environmental (Other)Fan-free (natural convection cooling)
RF Characteristics
RF output power @antenna portUp to 20W at each antenna port
Working frequency band2496MHz to 2690MHz (194MHz bandwidth)
Supported antenna type8 port dual polarization smart antenna
Optical Characteristics
Supported fibre typeSingle mode dual fibres (SMDF) or Multi mode dual
Electrical/Other Characteristics
Power supply-48V (-38V/-57V)
Table 1 - TD-RRH8X20-25 Main Characteristics
3.2.1Connectivity and Interfaces
The RRH provides the following external interfaces:
Ь Three (3) optical CPRI links
Ь Eight (8) antenna ports
Ь One (1) antenna calibration port
Ь One (1) AISG port for RET support
Ь One (1) alarm port
Ь One (1) DC power input port
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
9 / 20
Page 12
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
3.3Mechanical Characteristics
3.3.1Mechanical mounting solutions
TD-RRH8x20-25 can be either pole or wall mounted, using the appropriate mounting brackets:
these brackets are designed to be easily fitted before hanging and locking the RRH on to it.
Figure 4 -TD-RRH8X20-25 mounted on a pole
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
10 / 20
Page 13
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
3.3.2Grounding:
3.3.3Solar shield
TD-RRH8x20-25 does not use any fan as natural co nvection cooling is employed. It is equipped
with an aesthetic solar shield that may be removed, if desired, for indoor installation only.
In case of outdoor installations, a solar shield is used. The cover is of low weight and easy to
install.
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
11 / 20
Page 14
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
Figure 5 -TD-RRH8X20-25 with solar shield
The solar shield is part of the thermal concept of the TD-RRH8X20-25, protecting the RRH
against direct sun radiation.
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
12 / 20
Page 15
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
4ENVIRONMENTAL AND REGULATORY COMPLIANCE
4.1Environmental Compliance
4.1.1Operation Temperature and Humidity
The following requirements for environmental conditions apply for the RRH:
RRH meets the requirements as specified in IEC 60721-3-4 “Classification of Groups of
Environmental Parameters and their Severities Stationary use at Non-weather protected
locations” Classes 4K2/4Z5/4Z7/4B1/4C2/4S2/4M5.
4.1.2Storage
RRH meets the requirements as specified IEC 60721-3-1 “Classification of groups of
environmental parameters and their severities – Storage” Classes
1K4/1Z2/1Z3/1Z5/1B2/1C2(1C1)/1S3/1M2 (Weather protected, not temperature controlled
storage locations).
4.1.3Transportation
RRH meets the requirements as specified IEC 60721-3-2 “Classification of groups of
environmental parameters and their severities – Transportation “Classes
2K3/2B2/2C2/2S2/2M1 (Careful transportation).
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
13 / 20
Page 16
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
4.2.2EMC
Product conformance statements
Introduction:
The statements that follow are the product conformance statements that apply to the FDDRRH when
deployed in Canada.
Industry Canada:
ICES-003: Interference- Causing Equipment Standard Digital Apparatus
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
ICCS-03: Specification for Terminal Equipment, Terminal Systems, Network Protection Devices,
Connection Arrangements and Hearing Aids Compatibility
This product meets the applicable Industry Canada technical specifications.
RF approval:
• RSS-132: Cellular Telephones Employing New Technologies Operating in the Bands 2496 2690MHz
The term “IC” before the certification/registration number only signifies that the Industry Canada
technical specifications were met.
• RSS-133: Broadband Radio Service (BRS) and the Educational Broadband Service (EBS) bands.
The term “IC” before the certification/registration number only signifies that the Industry Canada
technical specifications were met
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
14 / 20
Page 17
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
United States:
Introduction:
The statements that follow are the product conformance statements that apply to the TDRRH when
deployed in the United States.
Federal Communications Commission:
Important!
Changes or modifications not expressly approved by Alcatel-Lucent, Inc. could void the user's
authority to operate the equipment.
.FCC Part 15:
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not
cause harmful interference.
This device meets FCC Part 15 Subpart B Class B requirements
. FCC Part15 Class A (as marketed)
Important!
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protections
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at the user's expense.
FCC Part15 Class B (as marketed)
Important!
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will no to ccur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
15 / 20
Page 18
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
• Consult the dealer or an experienced radio/TV technician for help.
FCC Part 68:
Not applicable for this Device
RF approval:
This equipment complies with Part 2, Sub part J-Equipment Authorization Procedures, of the FCC
Rules. This equipment complies with Part 27-Broadband Radio Service (BRS) and the Educational
Broadband Service (EBS) bands.
Antenna exposure:
Antenna installations for the TDRRH shall be performed in accordance with all applicable
manufacturer's recommendations, and national laws and regulations.
To ensure correct antenna installation, the antenna installer shall perform all necessary calculations
and/or field measurements to evaluate compliance with applicable national laws or regulations
regarding exposure to electromagnetic fields. The supplier of radio equipment, the supplier of antenna
equipment and the integrator and builder of the site must provide sufficient information so that the
limits of the exclusion zones can be determined. Any changes to the antenna or other equipment in the
transmit path may require re-evaluation of the exposures to electromagnetic fields.
Pursuant to 47 CFR Part1, Subpart I, subject to the provisions of section 1.1307, all installations must
be evaluated for requirements contained in Table 1, “Limits for maximum permissible exposure,” in
section 1.1310.
RRH meets the requirements as specified in:
xEN 55022 / CISPR22, class B to fulfil Radiated Emissions (RE) requirement.
xEN 55022 / CISPR22, class B to fulfil Conducted Emissions (CE) requirement.
xIEC 61000-4-2 to fulfil Electrostatic Discharge (ESD) Immunity requirement
xEN61000-4-3/A1 to fulfil Immunity to RF EM field (enclosure port) requirement.
xIEC 61000-4-4 to fulfil Electrical Fast Transient (EFT) Immunity requirement.
xIEC 61000-4-6 to fulfil Conducted Immunity requirement.
x3GPP TS 36.113 and ETSI EN 300 386
xETSI TS 136 113 for Radiated Immunity
xETSI TS 136 113 for Conducted Immunity
xFCC Part 15 Subpart B Class B for Radiated Immunity
xGR-1089-CORE, Sections 3.2.2 and 3.2.3 for conducted spurious emissions
xGR-1089-CORE, Sections 2.1.2 for ESD immunity
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
16 / 20
Page 19
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
4.2.3Eco-environmental compliancy
RRH complies with:
xRoHS 6/6 (lead solder free), Restriction on the use of certain Hazardous Substances
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
17 / 20
Page 20
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
5APPENDICES
5.1Appendix A: Publication History
06/DEC/2013
Issue 01.00 / EN, Released
5.2Appendix C: Glossary & Acronyms
5.2.1Glossary
Fibre link A fibre link is:
•Either one physical fibre when Single-Mode optical propagation is used (using CWDM),
•Either a pair of fibres when Multi-Mode optical propagation is used: one fibre carries
the downlink signal, the other one the uplink signals (Main and Diversity digital
streams are multiplexed into a single HSSL stream).
5.2.2Acronyms
1-10
3GPPThird Generation Partnership
Project
A-D
AISGAntenna Interface Standard Group
CWDMCoarse Wavelength Division
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
18 / 20
Page 21
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
G-S
HWHardware
IECInternational Electrotechnical
Commission
IPIngress Protection
LTELong Term Evolution
MMMulti-Mode (fibre)
RETRemote Electrical Tilt
RFRadio Frequency
RoHSRestriction of the use of certain
Hazardous Substances
RRHRemote Radio Head
RXReceiver/Receive
SFPSmall Form-factor Pluggable
SWSoftware
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
19 / 20
Page 22
TD-RRH8X20-25 PRODUCT DESCRIPTION DEC 2013
T - W
TXTransmitter/Transmit
VSWRVoltage Standing Wave Ratio
WEEEWaste of Electrical and Electronic
Equipment
Document Issue: V01/ EN | Document Status: Released
Alcatel-Lucent – Proprietary
See Notice on Page 2
20 / 20
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.