Netgear VZMS2050 Quick Start Manual

mount.
outdoors. in a shell.
fi ts like an Italian suit
mohawk top ... for attitude
seal by Acme
Quick Install Guide
Outdoor Shell for VueZone Motion Detection Cameras
Install mount & shell
• Choose a suitable camera location – check viewing angle and signal strength before installing mount.
• Install mount with screws.
• Screw shell onto threaded post of mount and tighten lock nut until snug against shell bottom to prevent camera rotation.
• Adjust camera view and tighten knob on mount to secure camera position.
Place camera in shell
• Unscrew top and bottom screws to open shell.
• Turn camera ON and place face down in shell front half.
• Firmly press shell back onto front half.
• Make sure shell is closed with gasket in place.
• Firmly tighten top and bottom screws.
Tip: install fresh camera batteries before closing.
Water-resistant shell lets you use your camera outdoors.
• Sprinkle, spray, and splash resistant (IPX4).
• Camera and shell attach securely to mount on threaded post.
• Do not submerge or use in standing water.
• Not suitable for use in extreme temperatures.
What’s in the box
• Outdoor Camera Shell
• Mounting Arm
• Screwdriver
VueZone.com
http://support.netgear.com
For the complete EU Declaration of Conformity, visit http://support.netgear. com/app/answers/detail/a_id/11621/
FAQs
Q: Will motion detection
work through the shell?
A: Yes – the special black
plastic on the shell front enables the motion sensor to function.
Q: Is the shell suitable for all
weather conditions?
A: No – camera batteries
are subject to standard temperature range limitations (14º– 122ºF or -10º– 50ºC).
Q: Is the outdoor shell
impact resistant?
A: No – the shell is for
moisture protection only and will break if dropped.
Loading...