Netgear VZMB2010 Quick Start Manual

Quick Install Guide
mount.
on a ceiling. on a table.
hanger upper
gravity-defying sphere
sasquatch- style footpad
Table & Ceiling Mount
Gives you 360ยบ positioning power.
Attaching Camera Tether (optional)
VueZone.com http://support.netgear.com
Unscrew magnetic mounting ball from base.
Place tether on screw and reattach mounting ball.
Remove rubber plug from camera bottom
with pin or needle.
Insert screw
through tether eyelet
and tighten into camera.
Tabletop Installation:
Use freestanding or secure with screws or adhesive. For best stability, position camera over the wide part of the triangular base.
Ceiling or Under-Shelf Installation:
Mount upside down and secure with screws. Attach included tether to deter theft (see below).
Tip: Screw mount onto any standard camera tripod.
For the complete EU Declaration of Conformity, visit http://support.netgear. com/app/answers/detail/ a_id/11621/
Loading...