NETGEAR GS110TUP, GS710TUP Technical data

10-Port Gigabit Ethernet Ultra60 PoE++

IN UNMANAGED

& SMART SWITCHES

†

In US & Europe Market Share

according to NPD and Context, September 2019

The rst Cloud Manageable PoE++
switch with Uninterrupted Ultra60
60W PoE++ power

Data Sheet | GS110TUP, GS710TUP

Smart Managed Pro Switches

As the leader in PoE switching, NETGEAR
now brings to market the rst Cloud
Manageable PoE++ switch with
Uninterrupted Ultra60 60W PoE++ power
to your business together with NETGEAR's
innovation "Uninterrupted PoE" for
constant power to the devices even during
switch rmware updates or reboots.

With IoT (Internet of Things) continuously
introducing wired devices for smart home
and smart building automation systems,
the 802.3bt PoE standard is needed to
support those devices that require greater
power - power that the 802.3at standard
(30W per port) cannot support.

With the growing demand in modern
business organizations for more Powered
Devices (PD) and higher Power-over­Ethernet (PoE) consumption per PD,
NETGEAR proudly introduces the new
Ultra60 PoE++ Smart Managed Pro
Switches with the 802.3bt standard to
provide up to 60W per port output PoE.

In addition to the IoT devices, these new
Ultra60 PoE++ switches will support

802.11AX wireless access points, PTZ and
4K IP surveillance cameras, PoE lighting,
PoE-powered audio speakers and AV
encoders, as well as other high-powered
devices.

NETGEAR Ultra60 PoE++ Smart Managed
Pro Switches offer advanced Layer
2+/Lite Layer 3 features such as static
routing, advanced PoE functionality and
controls including NETGEAR's innovative
Uninterrupted PoE, and Remote/Cloud
management capability with enhanced
performance. These switches are the
ideal solution even for the most advanced
business organizations looking for the best
combination of features, performance,
and value. These switches are purposely
designed for converged networks where
voice, video, and data are all carried on a
single network platform.

The GS110TUP comes with 4 Ultra60
PoE++ Gigabit ports, 4 PoE+ Gigabit
ports, 1 dedicated non-PoE Gigabit
copper and 1 dedicated Gigabit SFP
port. With a 240W total PoE budget, the
GS110TUP is sufcient for 802.3at PoE+
devices as well as future-proong for

802.3bt PoE++ deployment. The fanless,
silent design makes it perfect for an ofce
environment or any other noise-sensitive
deployments. With versatile mounting
options, this small is exible enough to to
be placed on a desk, mounted to the wall,
ceiling or pole, or mounted in a rack.

The GS710TUP comes with 8 Ultra60
PoE++ Gigabit ports, 1 dedicated non­PoE Gigabit copper and 1 dedicated
Gigabit SFP port, and includes a 480W
PoE budget, offering full 802.3bt 60W
PoE output across the 8 Ultra60 PoE++
ports. The GS710TUP is rack-mountable,
and with an operating noise of less
than 35dBA, the switch can also be
placed outside of the data closet without
disrupting those working nearby.

To fully empower PoE applications,
NETGEAR Insight Remote/Cloud
Management is now available on these
two new switch models as an optional
management mode. Activating the
NETGEAR Insight Cloud management,
enables management features allowing
businesses simpler conguration and
deployment from anywhere using the
NETGEAR Insight app from mobile
devices or the Insight Cloud Portal from
any device with a web browser.

PAGE 1 of 14

Highlights

Data Sheet | GS110TUP, GS710TUP

10-Port Gigabit Ethernet Ultra60 PoE++

Smart Managed Pro Switches

More Powerful Switches for High Power
Devices

• 4 x Ultra60 PoE++ Gigabit ports &
4 x PoE+ Gigabit ports with 240W PoE
budget (GS110TUP)

• 8 x Ultra60 PoE++ Gigabit ports with
480W PoE budget (GS710TUP)

• 1 dedicated non-PoE Gigabit copper
port

• 1 dedicated Gigabit SFP ber port

Fast and exible solution for business

data, voice and video converged
network

• Non-blocking switching with 20Gbps

• Fanless for silent operation in noise
sensitive environments (GS110TUP)

• Flexible mounting options

- GS110TUP: Desktop or wall mount
(VESA standard mounting holes),
or rack-mountable with included
mounting kit

- GS710TUP: Rack-mountable with
included mounting kit

- Ideal compact size for discreet
installations on ceilings or walls to
easily power LED lighting or IP
Cameras.

Powerful Connectivity and Security

• Layer 3 static routing with 32 routes
(IPv4) for inter-VLAN local routing

• Advanced VLAN suppor t for better
network segmentation

• L2/L3/L4 access control lists (ACLs) for
granular network access control
including 802.1x port authentication

• Uninterrupted PoE for constant power
to your devices even during switch
rmware updates or reboots

• Advanced per port PoE controls for
remote power management of PoE
connected devices including
operation scheduling

• Advanced QoS (Quality of Service) for
trafc prioritization including port­ based, 802.1p and L2/L3/L4 DSCP­ based

• Auto “denial-of-service” (DoS)
prevention

• IGMP Snooping and querier for
multicast optimization

• Ingress and egress rate limiting and
priority queuing for better bandwidth
allocation

• Port mirroring for network monitoring

• Energy Efcient Ethernet (IEEE

802.3az) for maximum power savings

• IPv6 management: IPv6 QoS, IPv6
ACL, IPv6 multicast, and static and
dynamic IPv6 address assignment

• Cable test to troubleshoot connection
issues

• Easy-to-use web browser-based
management GUI available in English,
German and Japanese

• SNMP v1, v2c, v3 and RMON remote
monitoring

Fully-integrated cloud-manageable
devices

Optional remote/cloud management,
maintenance, and monitoring capability
with NETGEAR Insight. Instantly activate
NETGEAR Insight Cloud management
from the local device management web
GUI after creating your NETGEAR Insight
account. NETGEAR Insight Basic service
allows for your rst two devices to be
managed remotely for free.

Smart IT, not Big IT

• Easy to manage via web-based
management interface

• NETGEAR Smart Control Center on a
Windows PC for multi-switch
deployment

• NETGEAR Switch Discovery Tool (NSDT)
to discover, register and access to the
local browser interface to congure the
switches

• Network Management System
(NMS300), allowing all NETGEAR
business products to be deployed and
managed through this single interface

NETGEAR quality and reliability

• Worry-free Limited Lifetime Warranty*,
online technical chat suppor t and Next
Business Day (NBD) replacement

PAGE 2 of 14

Data Sheet | GS110TUP, GS710TUP

10-Port Gigabit Ethernet Ultra60 PoE++

Smart Managed Pro Switches

Hardware at a Glance

FRONT REAR SIDE

Model
Name

GS110TUP Desktop 9 1 Dedicated 4 8

GS710TUP Rack mount 9 1 Dedicated 8 8 Internal (480W) 2

Form-Factor

10/100/1000BASE-T
RJ-45 Copper Ports

1G SFP

PoE++ Ports
(60W/port)

PoE/PoE+
Ports

Power Supply
(PoE Budget)

External
DC 54V 4.7A

(240W)

Software at a Glance

Fans

Fanless

Management

Web Browser-based
GUI (HTTP/HTTPS),

PC-Based Smart Control
Center Utility (SCC),

RMON, SNMP, 

NETGEAR Insight Cloud
Management via mobile
App and Insight Portal

PoE Control
Features

PoE on/off,

Dynamic PoE
budget allocation,

PoE class override,

PoE Power Usage
Metering,

PoE scheduling,

Uninterrupted PoE

Performance at a Glance

Model
Name

Packet
Buffer

CPU ACL

LAYER 2+ / LAYER 3 LITE FEATURES

IPv4/IPv6
ACL and

QoS

L2, L3, L4
Ingress

Static
Routing

IPv4

32 Routes

IPv4/IPv6
Multicast

Filtering

IGMP
Snooping,
Querier,
Fast Leave,
L2 Multicast
Router

MAC Address Table
ARP Table VLANs

VLANs

Static,

Dynamic,

VoIP, Voice,

Video,

8K Max
MAC (64
VLANs),

Protocol
based,

GARP,
GVRP

Fabric

IEEE (802.3az)
Energy Efcient
Ethernet

Yes LLDP-MED,

Latency
(64-Byte Packet)

Convergence

RADIUS,

802.1X

IPv4 Static
Routing

Link
Aggregation/
Port Trunking

LACP and
Manual Static
LAGs

(up to 4 LAGs
with max 8
members)

Multicast
IGMP Group

GS110TUP

GS710TUP

512 KB

500MHz single core
128MB RAM
32MB SPI FLASH

100 shared
(ingress)

8K Max MAC
64 VLANs

20 Gbps
line-rate

1G Copper: < 3.9 µs;
1G Fiber: < 3.9 µs

32 256

PAGE 3 of 14

Data Sheet | GS110TUP, GS710TUP

10-Port Gigabit Ethernet Ultra60 PoE++

Smart Managed Pro Switches

Features and Benets

Hardware Features

Require no additional hardware (cloud keys, network portals, local servers,

Fully-integrated Cloud-manageable Devices

1000BASE-T Copper Ethernet and PoE+ and
PoE++ connections

1000BASE-X SFP ports

Silent Acoustics (GS110TUP)

Energy Efcient Ethernet (IEEE 802.3az) Maximum power reduction for ongoing operation cost savings.

Desktop, wall mount (VESA holes available),
ceiling mount and rack mount (kit available)

Kensington Lock Slot Prevent theft, removal, or tampering when used for desktop deployment.

Software Features

Remote setup, management, maintenance and
monitoring anywhere, anytime, from your mobile
device, PC, Mac, or tablet

Auto-join and Congure (Zero-Touch Provisioning)

Multi-site, Multi-network Single Pane-of-Glass View

Comprehensive IPv6 Support for Management,
ACLs and QoS

IPv4 Static Routing

Robust security features:

• 802.1x authentication (EAP)

• Port-based security by locked MAC

• ACL ltering to permit or deny trafc
based on MAC and IP addresses

Comprehensive QoS features:

• Port-based or VLAN

802.1p-based prioritization

• Layer 3-based (DSCP) prioritization

• Port-based egress rate limiting

Uninterrupted PoE

VPN or proxy appliances etc) to directly connect to the cloud and allow
remote management. No additional hardware or software. Just switch
to Insight Cloud Management mode through Web browser-based User
Interface and go.

Supports 802.3bt type 3 (60W/port) devices, as well as all 802.3at (30W/
port) and 802.3af (15.4W/port) devices. Good for high-density VoIP, surveil
lance and Wi-Fi AP deployments, scalable for future growth. Never face the
risk of running out of PoE ports or PoE power budget.

One dedicated Gigabit SFP port provides a ber uplink without sacricing
any downlink copper Gigabit Ethernet port, and across long distances.
Support for Fiber and Copper modules.

Fanless design allows for silent operation, great for deployment in noise­sensitive environments.

Flexible deployment on desktop, wall, ceiling or other location using
100mm VESA-compliant mounts on GS110TUP. Both GS110TUP and
GS710TUP support rack mount. Great for deployments of PoE-powered
LED lighting or IP Cameras.

Locally or remotely setup, congure, manage, monitor or even trouble
shoot your network from anywhere, anytime. Check network status, view
dashboards for network health and activity, power cycle PoE ports, etc, and
update rmware remotely. No need to be on-site, open up ports to your
network, or VPN into it.

Additional Insight Managed devices added to the network automatically
inherit settings and conguration.

View and congure multiple networks across multiple sites, all from one
single app; NETGEAR Insight.

Build current network with future in mind. Ensure investment protection
and a smooth migration to an IPv6-based network without switch
replacement.

A simple way to provide segmentation of the network with internal routing
through the switch – reserving the router for external trafc routing only,
making the entire network more efcient.

Build a secured, converged network with all types of trafc by preventing
external attacks and blocking malware while allowing secure access for
authorized users.

Advanced controls for optimized network performance and better delivery
of mission-critical trafc such as voice and video.

Keep PoE power on even when the switch is updating rmware or
performing a software reboot. Ideal when powering IP Cameras and
lights for continuous feed and power.

-

-

PAGE 4 of 14

Software Features (continued)

Auto-VoIP, Auto-Voice VLAN, and Auto-Video
VLAN

IGMP Snooping and MLD Snooping

Protected Ports

DHCP Snooping

Dynamic VLAN Assignment
(RADIUS)

Port Trunking/Link Aggregation (LACP)

Loop Prevention and Auto-DoS Prevention

PoE Timer and Scheduling

Port Mirroring and Cable Test

Dual Firmware Images

Firmware Updates from Cloud

Multiple Language Local GUI

Data Sheet | GS110TUP, GS710TUP

10-Port Gigabit Ethernet Ultra60 PoE++

Smart Managed Pro Switches

Automatic Voice over IP prioritization (Auto-VoIP) simplies most complex
multi-vendor IP telephone deployments either based on protocols (SIP,
H.323 and SCCP) or on OUI bytes (default database and user-based OUIs)
in the phone source MAC address, providing the best class of service to
VoIP streams (both data and signaling) over other ordinary trafc by clas
sifying trafc, and enabling correct egress queue conguration. Similarly,
Auto-Video VLAN enables IGMP snooping to minimize broadcast streams.

Facilitate fast receiver joins and leaves for multicast streams. Save cost and
improve network efciency by ensuring multicast trafc only reaches
designated receivers without the need of an extra multicast router.

Ensure no exchange of unicast, broadcast, or multicast trafc between
the protected ports on the switch, thereby improving the security of your
converged network. This allows your sensitive phone phone conversations
to stay private and your surveillance video clips can be forwarded to their
designated storage device without leakage or alteration.

Ensure IP address allocation integrity by only allowing DHCP messages
from trusted DHCP servers and dropping malformed DHCP messages with
a port or MAC address mismatch.

IP phones and PCs can authenticate on the same port but under different
VLAN assignment policies. Users are free to move around and enjoy the
same level of network access regardless of their physical location on the
network.

Build up bigger bandwidth to support aggregated uplink/downlink trafc
or to provide redundant link(s). Aggregate up to 8 ports for 8Gbps
connections.

Detect and prevent (auto port shutdown) accidental network loops and
protect against DoS attacks.

Allows IT administrators to increase network security, better utilize network
resources and conserve energy by scheduling or remotely controlling on/
off of PoE ports.

Many-to-one port mirroring for better and quicker network diagnostics and
troubleshooting. Cable test easily identies bad Ethernet cables.

Dual rmware images for transparent rmware updates with minimum
service interruption

Direct cloud-to-device rmware updates, initiated and/or scheduled using
the Insight app, all from the palm of your hand, anytime, anywhere when
using NETGEAR Insight management.

Product documentation and local-only web user interfaces are translated,
giving you the ability to select your preferred language

‡

.

-

‡

English, German, and Japanese are the current suppor ted languages in the local-only web GUI. The Insight mobile app and Insight Cloud Portal support local
languages per the device used (phone or computer browser).

PAGE 5 of 14