Netgear EPS200W, EPS90W, EPS130W User Manual
Flexible PoE Power Budget
1. Register With the NETGEAR Insight App
Installation Guide
External Power Adapter
Model EPS90W, EPS130W, and EPS200W
WARNING: Read this document rst before connecting the new
power adapter to a device.
Package Contents
• Power adapter
• Power cord (varies by region)
• Installation guide
NETGEAR’s Gigabit Ethernet Unmanaged Switches, models
GS108LP, GS108PP, GS116LP, and GS116PP, include a built-in PoE
power selector switch. The power selector switch lets you connect
a compatible power adapter to increase or decrease the PoE
power available on the switch.
Note: Only connect the power adapter to a compatible NETGEAR
switch listed in the following table.
Switch
Model
GS108LP and
GS108PP
GS116LP and
GS116PP
Power Adapter
Model
EPS90W 90W 83W
EPS130W 130W 123W
EPS90W 90W 76W
EPS130W 130W 115W
EPS200W 200W 183W
Power Adapter
Wattage
PoE+ Power
Wattage
Use the NETGEAR Insight app to register your new power adapter
(and your switch if you haven’t already) to activate your warranty
and access support.
1. On your iOS or Android mobile device or tablet, visit the app
store, search for NETGEAR Insight, and download the latest
version of the app.
2. Open the NETGEAR Insight app.
3. If you did not set up a NETGEAR account, tap Create
NETGEAR Account and follow the onscreen instructions.
4. Enter the email address and password for your account and
tap LOG IN.
5. To register the new power adapter, tap the menu in the upper
left corner and select Register Any NETGEAR Device.
6. Scan the serial number barcode using the camera on your
mobile device, or manually enter the 13-digit serial number.
7. Tap Go.
8. To register your switch, repeat Steps 5–7.
2. Install the Power Adapter
Support
1. Power down the switch and disconnect the current power cord.
2. Use a screwdriver to remove the
metal plate that covers the slider.
54V
54V
54V
3.7A (GS116PP)
2.4A
1.66A (GS116LP)
3. Move the slider to the setting that
corresponds to the wattage of the
new power adapter.
4. Replace the metal plate.
5. Connect the new power adapter
to the switch.
6. Plug the power adapter into an electrical outlet.
The switch operates at the switch power budget allowable by
the power adapter.
3.7A (GS116PP)
54V
2.4A
54V
54V
1.66A (GS116LP)
GS116LP switch
with power adapter
November 2018
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.
Thank you for purchasing this NETGEAR product. You can visit
https://www.netgear.com/support/ to register your product, get
help, access the latest downloads and user manuals, and join our
community. We recommend that you use only ofcial NETGEAR
support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce
document en français canadien à
https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in
Canadian French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU
Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the
power supply.
Do not use this device outdoors. If you connect cables or devices
that are outdoors to this device, see
http://kb.netgear.com/000057103 for safety and warranty
information.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
Loading...