
NEC Display Solutions of America, Inc.
E551 Installation Guide
55” LCD Display
Contents:
Product Description and Notes Page 1
Ventilation Requirements Page 2
Display Dimensions
Front, Top & Right Side Page 3
Rear Page 4
Display Dimensions with Stand Page 5
Optional Wall Mount Dimensions (WMK-E551) Page 6
Product Description:
Type: LCD Display Screen Surface: Anti-Reflective
Resolution: 1920 x 1080 Dimensions without stand: 51.52”(W) x 32.89”(H) x 4.5”(D)
Aspect Ratio: 16:9 Dimensions with stand: 51.52”(W) x 34.84”(H) x 12.2”(D)
FCC: Class B Weight without stand: 79.1 lbs
Power Consumption: 240W (typ) Weight with stand: 83.5 lbs
BTU’s: 818.92 BTU/hour
NOTES:
• This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
• Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
• This unit is built to sustain Landscape orientation only.
• 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
• Distances are in inches, for millimeters multiply by 25.4.
• Distances may vary ±5%.
Rev 1.4
www.necdisplay.com E421 Page 1 of 6

NEC Display Solutions of America, Inc.
E551 Installation Guide
55” LCD Display
Ventilation Requirements:
Dimensions below are minimum required for proper ventilation.
10cm
(4in.)
NOTE:
• The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be
covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and
recommendations.
30cm (12in.)
30cm (12in.)
30cm (12in.)
10cm
(4in.)
30cm (12in.)
Rev 1.4
10cm
(4in.)
www.necdisplay.com E421 Page 2 of 6