
NEC Display Solutions of America, Inc.
E321 Installation Guide 
32” LCD Display     
Contents: 
Product Description and Notes          Page 1  
Ventilation Requirements             Page 2  
Display Dimensions  
   Front, Top & Right Side        Page 3 
 Rear                 Page 4 
Display Dimensions with Stand         Page 5 
Optional Wall Mount Dimensions (WMK-3260L)    Page 6 
Optional Wall Mount Dimensions (WMK-3257)    Page 7 
Input Panels            Page 8 
Product Description:  
Type:      LCD Display           Screen Surface:   Anti-Reflective  
Resolution:     1366 x 768           Dimensions without stand: 30.8”(W) x 20.1”(H) x 3.7”(D) 
Aspect Ratio:     16:9              Dimensions with stand:  30.8”(W) x 22.0”(H) x 8.3”(D)  
FCC:      Class B         Weight without stand:   22.5 lbs 
Power Consumption:  150W (typ)        Weight with stand:   24.9 lbs 
BTU’s:     511.82 BTU/hour 
NOTES: 
•  This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not 
intended to be a step-by step procedure for installation. 
•  Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local 
building codes. All mounts should make secure contact to wood studs. 
•  This unit is built to sustain Landscape orientation only. 
•  4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally 
to fill the screen using the menus (see “Aspect Modes” in menus and user manual). 
•  Distances are in inches, for millimeters multiply by 25.4. 
•  Distances may vary ±5%. 
Rev 1.7 
www.necdisplay.com              E321                         Page 1 of 8 

E321 Installation Guide 
32” LCD Display     
Ventilation Requirements (all models): 
Dimensions below are minimum required for proper ventilation. 
WALL 
60mm 
2” 
NEC Display Solutions of America, Inc.
60mm 
2” 
Rev 1.7 
0 to 40 degC 
32 to 104 degF 
WALL 
60mm 
2” 
60mm 
2” 
60mm 
WALL 
2” 
 NOTE: 
•  The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be 
covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and 
recommendations. 
www.necdisplay.com              E321                         Page 2 of 8 

E321 Installation Guide 
32” LCD Display     
Display dimensions:
NEC Display Solutions of America, Inc.
Rev 1.7 
www.necdisplay.com              E321                         Page 3 of 8 

E321 Installation Guide 
32” LCD Display     
Display dimensions (cont.):
NEC Display Solutions of America, Inc.
Rev 1.7 
www.necdisplay.com              E321                         Page 4 of 8 

E321 Installation Guide 
32” LCD Display     
Dimensions with stand: 
NEC Display Solutions of America, Inc.
Rev 1.7 
www.necdisplay.com              E321                         Page 5 of 8 

NEC Display Solutions of America, Inc.
E321 Installation Guide 
32” LCD Display     
 Dimensions with optional Wall Mount Kit (WMK3260-L): 
NOTE: 
•  Some connectivity located on the back control panel is covered when WMK3260-L is in place. 
Rev 1.7 
www.necdisplay.com              E321                         Page 6 of 8 

NEC Display Solutions of America, Inc.
E321 Installation Guide 
32” LCD Display     
Dimensions with optional Wall Mount Kit (WMK-3257):
Rev 1.7 
www.necdisplay.com              E321                         Page 7 of 8 

E321 Installation Guide 
32” LCD Display     
Input Panels: 
Back
: 
Side (Rotated): 
NEC Display Solutions of America, Inc.
Rev 1.7 
www.necdisplay.com              E321                         Page 8 of 8