NAD T514 User Manual

®

T514

DVD / CD / MP3 Player

ENGLISH

FRANÇAISDEUTSCH

Owner’s Manual
Manuel de l'utilisateur
Bedienungsanleitung
Gebruikershandleiding

Manual del Usuario
Manuale delle Istruzioni
Manual do Proprietário
Bruksanvisning

NEDERLANDS

ESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

ENGLISH FRANÇAIS

DEUTSCH

Introduction

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER OR BACK
OF THIS PRODUCT. THERE ARE NO USER­SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO DRIPPING OR SPLASHING WATER, RAIN, OR
MOISTURE. DO NOT PLACE OBJECTS FILLED WITH
WATER SUCH AS VASES, ON THE PRODUCT.

NOTES ON COPYRIGHT

It is forbidden by law to copy, broadcast, show, broadcast via cable, play
in public, or rent copyrighted material without permission. This product
features the copy protection function developed by Macrovision. Copy
protection signals are recorded on some discs. When recording and
playing the pictures of these discs picture noise will appear. This product
incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND
625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.

NEDERLANDS

ESPAÑOL

ITALIANO

PORTUGUÊS

WARNING: THIS DIGITAL VERSATILE DISC PLAYER
EMPLOYS A LASER SYSTEM. USE OF CONTROLS,
ADJUSTMENTS, OR THE PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.

WARNING: TO PREVENT DIRECT EXPOSURE TO
LASER BEAM, DO NOT OPEN THE ENCLOSURE.
VISIBLE LASER RADIATION WHEN OPEN.

WARNING: NEVER STARE DIRECTLY INTO THE
LASER BEAM.

CAUTION

DO NOT INSTALL THIS PRODUCT IN A CONFINED SPACE
SUCH AS A BOOK CASE OR SIMILAR UNIT.

This product is manufactured to comply with the radio
interference requirements of EEC DIRECTIVE
89/336/EEC, 93/68/EEC and 73/23/EEC.

SERIAL NUMBER:

You can find the serial number on the back of the unit. This number is
unique to this unit and not available to others. You should record
requested information here and retain this guide as a permanent record
of your purchase.

MODEL NO. ____________________________
SERIAL NO. ____________________________
DATE OF PURCHASE _________________________

SVENSKA

NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited

Copyright 2005, NAD Electronics International, a division of Lenbrook Industries Limited

2

Introduction

TABLE OF CONTENTS

INTRODUCTION

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Symbol used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

About the ( ) Symbol Display . . . . . . . . . . . . . . . . . . . . . . . . . .4

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Disc-related terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Front Panel and Display Window . . . . . . . . . . . . . . . . . . . . . . . . .7

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

INSTALLATION AND SETUP

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Setting up the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

DVD Player Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Audio Connection to Optional Equipment . . . . . . . . . . . . . . . . .11

Before operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

LOCK (Parental Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

OPERATION

Operation with DVD and Video CD . . . . . . . . . . . . . . . . . . . . . . .17

Playing a DVD or Video CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Special DVD Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Operation with Audio CD and MP3 / WMA Disc . . . . . . . . . . . .20

Playing an Audio CD or MP3/WMA Disc . . . . . . . . . . . . . . . . . . .20

Audio CD and MP3 / WMA Disc Features . . . . . . . . . . . . . . . . . .21

Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Operation with JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Viewing a JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Operation with a DVD VR format Disc . . . . . . . . . . . . . . . . . . . .24

Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

REFERENCE

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Table of Languages and their Codes . . . . . . . . . . . . . . . . . . . . . .27

Country Codes List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

3

Introduction

BEFORE USE

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

To ensure proper use of this product, please read this owner’s manual
carefully and retain for future reference.

This manual provides information on the operation and maintenance of
your DVD player. Should the unit require service, contact an authorized
service location.

SYMBOL USED IN THIS MANUAL

The lightning flash symbol alerts you to the presence of
dangerous voltage within the product enclosure that may
constitute a risk of electric shock.

The exclamation mark alerts you to the presence of important
operating and maintenance / servicing instructions.

Indicates hazards likely to cause harm to the unit itself or other
material damage.

NOTE:

Indicates special notes and operating features.

TIP:

Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols is applicable only
to the disc represented by the symbol.

ABOUT THE SYMBOL DISPLAY

“ ” may appear on your TV display during operation and indicates
that the function explained in this owner’s manual is not available on
that specific DVD video disc.

NOTES ON DISCS
HANDLING DISCS

Do not touch the playback side of the disc. Hold the disc by the edges
so that fingerprints do not get on the surface. Never stick paper or tape
on the disc.

STORING DISCS

After playing, store the disc in its case. Do not expose the disc to direct
sunlight or sources of heat and never leave it in a parked car exposed to
direct sunlight.

CLEANING DISCS

Fingerprints and dust on the disc can cause poor picture quality and
sound distortion. Before playing, clean the disc with a clean cloth. Wipe
the disc from the centre out.

ESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

DVD-V

VCD

CD

MP3

WMA

JPEG

DVD and finalized DVD±R/RW

Video CDs

Audio CDs

MP3 Discs

WMA Discs

JPEG Discs

Do not use strong solvents such as alcohol, benzine, thinner,
commercially available cleaners, or anti-static spray intended for older
vinyl records.

4

Introduction

BEFORE USE

TYPES OF PLAYABLE DISCS

DVD
(8 cm / 12 cm disc)

Video CD (VCD)
(8 cm / 12 cm disc)

Audio CD
(8 cm / 12 cm disc)

In addition, this unit plays DVD -R, DVD +R, DVD -RW,
DVD +RW, SVCD and CD-R / CD-RW that contains audio titles, MP3,
WMA, and/or JPEG files.

This indicates a product feature that is capable of playing
DVD-RW discs recorded with Video Recording format.

NOTES

• Depending on the conditions of the recording equipment or the
CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) disc itself, some
CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) discs cannot
be played on the unit.

• Do not attach any seal or label to either side (the labelled side or the
recorded side) of a disc.

• Do not use irregularly shaped CDs (e.g., heart- shaped or octagonal)
since they may result in malfunctions.

REGIONAL CODE

This DVD player is designed and manufactured for playback
of region “2” encoded DVD software. This unit can play only

2

DVD discs labeled “2” or “ALL”.

NOTES ON REGIONAL CODES

• Most DVD discs have a globe with one or more numbers in it clearly
visible on the cover. This number must match your DVD player’s
regional code or the disc cannot play.

• If you try to play a DVD with a different region code from your
player, the message “Check Regional Code” appears on the TV
screen.

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

NOTES ON DVDS AND VIDEO CDS

Some playback operations of DVDs and Video CDs may be intentionally
programmed by software manufacturers. This unit plays DVDs and
Video CDs according to disc content designed by the software
manufacturer, therefore some playback features may not be available or
other functions may be added.

MANUFACTURED UNDER LICENCE FROM DOLBY LABORATORIES.
“DOLBY”, “PRO LOGIC”, “MLP LOSSLESS”, AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES.

DTS AND DTS DIGITAL OUT ARE TRADEMARKS OF DIGITAL
THEATER SYSTEMS, INC.

ITALIANO

PORTUGUÊS

SVENSKA

5

Introduction

BEFORE USE

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

ESPAÑOL

DISC-RELATED TERMS

DVD ±R / DVD ±RW

DVD -R and DVD +R are two different standards for recordable DVD
drives and discs. This format allows information to be recorded onto the
DVD disc only once. DVD +RW and DVD -RW are two standards for
re-writable media, meaning the DVD content can be erased and
re-recorded. Single-sided discs can hold 4.38 Gigabytes and double­sided discs hold twice as much. There are no dual layer single sided
recordable discs.

VCD (VIDEO CD)

A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700 MB
disc) of MPEG-1 full-motion video along with quality stereo sound.

MPEG

MPEG is an international standard for video and audio compression.
MPEG-1 is used in encoding video for VCD and provides for
multichannel surround sound coding such as PCM, Dolby Digital, DTS
and MPEG audio.

MP3

MP3 is a popular compression format used for digital audio files that
yields very high near-CD quality.

WMA

Windows media audio file. A type of coding / decoding developed by
Microsoft Corp.

JPEG

Joint Pictures Expert Group. JPEG is a compressed file format that allows
you to save images with no limit on the number of colors.

PBC: PLAYBACK CONTROL (VIDEO CD ONLY)

Playback control is available for Video CD (VCD) version 2.0 disc
formats. PBC allows you to interact with the system via menus, search
functions, or other typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are included in the disc.
Video CDs not equipped with PBC (Version 1.1) operate in the same
way as audio CDs.

TITLE (DVD VIDEO DISCS ONLY)

A title is generally a distinct section of a DVD disc. For example the main
feature could be title 1, a documentary describing how the film was
made could be title 2, and cast interviews could be title 3. Each title is
assigned a reference number enabling you to locate it easily.

CHAPTER (DVD VIDEO DISCS ONLY)

A chapter is a segment of a title such as a scene in a film or one
interview in a series. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending on the disc,
chapters may not be recorded.

SCENE (VCD)

On a video CD with PBC (playback control) functions, moving pictures
and still pictures are divided into sections called “scenes”. Each scene is
displayed in the menu screen and assigned a scene number, enabling
you to locate the scene you want. A scene is composed of one or several
tracks.

TRACK

A distinct element of audiovisual information, such as the picture or
sound track for a specific language (DVD), or a musical piece on a
video or audio CD. Each track is assigned a track number, enabling
you to locate the track you want. DVD discs allow one track of video
(with multiple angles) and several tracks of audio.

ITALIANO

PORTUGUÊS

SVENSKA

6

Front Panel

Introduction

FRONT PANEL AND DISPLAY WINDOW

POWER

Switches the player ON and OFF.

Power indicator

PLAY

Starts playback.

PAUSE

Pause playback temporarily/press
repeatedly for frame-by-frame
playback.

STOP

Stops playback.

OPEN / CLOSE

Opens or closes the disc tray.

SCAN ( / )

Press for fast reverse search
or forward search.

SKIP ( )

Moves to PREVIOUS or
NEXT chapter/track.

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

Disc Tray

Insert a disc here.

T514

Display window

Shows the current status

of the player.

Remote Sensor

Point the DVD Player remote control here.

Display Window

Indicates current player
function (Play, Pause)

DVD

CD Audio CD inserted
VCD Video CD inserted
SVCD Super Video CD inserted
MP3 MP3 or WMA disc inserted

DVD inserted

CHP/TRK

Indicates current chapter
or track number

DVDS VCD CHP

MP3

CD TRK

Indicates repeat mode

Indicates encoding DTS

and Dolby digital of the

current disc.

Indicates total playing
time/elapsed time

A

ALL

ITALIANO

PORTUGUÊS

D

B

SVENSKA

7

Introduction

REAR PANEL

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

COAXIAL (Digital audio out jack)

Connect to digital (coaxial) audio equipment.

AUDIO OUT (Left/Right)

Connect to an amplifier, receiver,
or stereo system.

VIDEO OUT

Connect to a TV with video inputs.

Plug into the power source.

SCART/RGB OUT

Connect to a TV with SCART jack.

AC Power Cord

ESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

12V TRIGGER IN

By connecting this DVD player to another NAD audio
component or system controller equipped with a 12V trigger
output, you can remotely operate the T514C power ON/OFF.

COMPONENT/PROGRESSIVE SCAN VIDEO OUT

Connect to a TV with Y Cb/Pb Cr/Pr inputs.

S-VIDEO OUT

Connect to a TV with S-Video inputs.

OPTICAL (Digital audio out jack)

Connect to digital (optical) audio equipment.

8

Introduction

REMOTE CONTROL

Switches DVD Player ON.

Selects an audio language (DVD).

Selects a subtitle language.

Selects a DVD camera angle if available

Repeat chapter, track, title, all.

Repeat sequence.

Plays tracks in random order.

Marks any point during playback.

Displays MARKER SEARCH menu.

You can change the resolution depending on your TV

Reverse/ Forward slow playback.

SLOW ( / )

Displays the discs Title menu, if available.

Accesses or removes setup menu.

(left/right/up/down)

- Selects an item in the menu.

Acknowledges menu selection

Accesses On-Screen display

ON

AUDIO

SUBTITLE

ANGLE

REPEAT

RPT A-B

RANDOM

MARKER

SEARCH

RESOLUTION

TITLE

SETUP

ENTER

DISP

OFF

Switches DVD Player OFF.

ON OFF

SUBTITLE

RPT A-B

CLEAR

SEARCH

2

5

8

0

SETUP

ENTER

STOP

PLAY

ANGLE

RANDOM

ZOOM

RESOLUTION

3

6

9

SCAN

MENU

RTN

PAUSE/STEP

SKIP

AUDIO

REPEAT

PROGRAM

MARKER

1

4

7

.

SLOW

TITLE

DISP

OPEN/CLOSE

SKIP

PROGRAM

Enters to the program edit mode or exits from that.

CLEAR

Removes a track number on the program list or a mark
on the MARKER SEARCH menu.

ZOOM

Enlarges video image.

0-9 number buttons

Selects numbered items in a menu.

( / )

SCAN

Press for fast reverse search or forward search.

MENU

Accesses menu on a DVD disc.

RTN

Displays the menu of a video CD with PBC.

OPEN/CLOSE

Opens and closes the disc tray.

STOP ( )

Stops playback.

PAUSE/STEP ( )

Pauses playback temporarily/ press repeatedly
for frame-by-frame playback.

Reverse SKIP ( )

Go to beginning of current chapter or track or go
to previous chapter or track.

PLAY ( )

Starts playback.

Forward SKIP ( )

Go to next chapter or track.

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

PRESS IN AND LIFT TAB TO REMOVE
BATTERY COVER OUT FROM RECESS

DVD 6

PLACE BATTERIES INTO OPENING. ENSURE
THE CORRECT POLARITY IS OBSERVED

ITALIANO

PORTUGUÊS

REPLACE BATTERY COVER BY ALIGNING AND
INSERTING THE TWO TABS INTO THE HOLES.

PRESS BATTERY COVER INTO PLACE UNTIL IT
'CLICKS' CLOSED

SVENSKA

9

Installation and Setup

CONNECTIONS

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

ESPAÑOL

SETTING UP THE PLAYER

The picture and sound of a nearby TV, VCR, or radio may be distorted
during playback. If this occurs, position the player away from the TV,
VCR, or radio, or turn off the unit after removing the disc.

DVD PLAYER CONNECTIONS

Depending on your TV and other equipment there are various ways
you can connect the player. Please refer to the manuals of your TV,
stereo system or other devices as necessary for additional connection
information.

Rear of TV

COMPONENT VIDEO /

PROGRESSIVE SCAN INPUT

Pr

VIDEO

AUDIO INPUT

INPUT

Y

Pb

L

R

A VC

Rear of DVD player

SCART INPUT

T

Video and Audio Connections to Your TV

Make sure the DVD player is connected directly to the TV and not to a
VCR, otherwise the DVD image could be distorted by the copy
protection system.

Video

Connect the VIDEO OUT jack on the DVD player to the video in jack on
the TV using the video cable (V).

SCART connection

Connect the TO TV SCART jack on the DVD Player to the
corresponding in jacks on the TV using the SCART cable (T).

Component Video (Color Stream®)

Connect the COMPONENT VIDEO OUT/PROGRESSIVE SCAN jacks on
the DVD Player to the corresponding in jacks on the TV using an Y Pb
Pr cable (C).

PROGRESSIVE SCAN (COLORSTREAM® PRO):

• If your television is a high-definition or “digital ready” television, you
may take advantage of the DVD Player’s progressive scan output for
the highest video resolution possible.

• If your TV does not accept the Progressive Scan format, the picture
will appear scrambled if you try Progressive Scan on the DVD Player.

NOTES

• Set the Progressive to “On” on the setup menu for progressive
signal, see page 14.

• Set the progressive to “Off” by removing any disc from the unit and
close the disc tray. see that “no disc” is displayed on the display
window. Then press STOP and hold it for five seconds before
releasing it.

• Progressive scan does not work with the analogue video connections
(yellow VIDEO OUT jack).

ITALIANO

PORTUGUÊS

SVENSKA

CAUTION

You must set the TV Output Select option to use COMPONENT VIDEO
OUT/PROGRESSIVE SCAN and SCART jacks.
(See “TV Output Select” on page 14.)

Audio Connection to Your TV:

Connect the left and right AUDIO OUT jacks of the DVD Player to the
audio left and right IN jacks on the TV (A) using the audio cables. Do
not connect the DVD Player’s AUDIO OUT jack to the Phono In jack
(record deck) of your audio system.

10

Installation and Setup

CONNECTIONS

AUDIO CONNECTION TO OPTIONAL EQUIPMENT

Connect the DVD player to your optional equipment for audio output.

Rear of DVD player

AXO

L

OPTICAL COAXIAL

Amplifier (Receiver)

R

AUDIO INPUTDIGITAL INPUT

Amplifier equipped with 2-channel analogue stereo or Dolby Pro
Logic ll / Pro Logic

Connect the left and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier, receiver, or stereo system,
using the audio cables (A).

Amplifier equipped with 2-channel digital stereo (PCM) or audio
/ video receiver equipped with a multi-channel decoder (Dolby
Digital™, MPEG 2, or DTS)
1 Connect one of the DVD Player’s DIGITAL AUDIO OUT jacks

(OPTICAL O or COAXIAL X) to the corresponding in jack on your
amplifier.

2 Use an optional digital (optical O or coaxial X) audio cable.

DIGITAL MULTI-CHANNEL SOUND

A digital multi-channel connection provides the best sound quality. For
this you need a multi-channel audio / video receiver that supports one
or more of the audio formats supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver manual and the
logos on the front of the receiver.

NOTES

• If the audio format of the digital output does not match the
capabilities of your receiver, the receiver produces a strong, distorted
sound or no sound at all.

• Six Channel Digital Surround Sound via a digital connection can only
be obtained if your receiver is equipped with a Digital Multi-channel
decoder.

• To see the audio format of the current DVD in the on-screen display,
press AUDIO.

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

11

ITALIANO

PORTUGUÊS

SVENSKA

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

Installation and Setup

BEFORE OPERATION

ON-SCREEN DISPLAY

You can display the general playback status on the TV screen. Some
items can be changed using the menu. To use the on-screen display:

1 Press DISPLAY during playback.
2 Press to select an item. The selected item is highlighted.
3 Press to change the setting. You can also use the number

buttons if appropriate (e.g. inputting the title number). For some
functions, press ENTER to execute the setting.

NOTES

• Some discs may not provide all of the features shown below.

• If no button is pressed for 10 seconds, the on-screen display
disappears.

PLAYBACK STATUS/RESTRICTIONS

Title

Repeat title

A - B

Repeat sequence

1 / 9

Enter a Marker

MARKER SEARCH

Marker Search menu

Resume play from this point

Action prohibited or not available

Example: On-Screen Display during
playing DVD Video

Items

Title Number

Chapter Number

Time search

Audio language
and Digital Audio
Output mode

Subtitle language

Angle

Sound

1 / 3

1 / 12

0:20:09

ABC

1 ENG

1 / 3

3D SUR

Selection Method

Example: On-Screen Display during
playing VCD

Items

Track Number
(or PBC mode)

Time search

1 / 3

0:20:09

Selection Method

, Numbers

ENTER

, Numbers

ENTER

Numbers, ENTER

or

AUDIO

or

SUBTITLE

or

ANGLE

, Numbers

ENTER

Numbers

ENTER

ESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

Audio Channel

Sound

or

AUDIO

3D SUR

12

Installation and Setup

BEFORE OPERATION

INITIAL SETTINGS

By using the Setup menu, you can make various adjustments to items
such as picture and sound. You can also set a language for the subtitles
and the Setup menu, among other things. For details on each Setup
menu item, see pages 13 to 16.

TO DISPLAY AND EXIT THE MENU:

Press SETUP to display the menu. A second press of SETUP will take you
back to initial screen.

To go to the next level:

Press on the remote control.

To go back to the previous level:

Press on the remote control.

GENERAL OPERATION

1 Press SETUP. The Setup menu appears.
2 Use to select the desired option then press to move to the

second level. The screen shows the current setting for the selected
item, as well as alternate setting(s).

3 Use to select the second desired option then press to move

to the third level.

4 Use to select the desired setting then press ENTER to confirm

your selection. Some items require additional steps.

5 Press SETUP or PLAY to exit the Setup menu.

LANGUAGE

LANGUAGE

Menu Language

Disc Audio

Disc Subtitle

Disc Menu

English

Original

Off

Original

Move

Select

MENU LANGUAGE

Select a language for the Setup menu and on-screen display.

DISC AUDIO / SUBTITLE / MENU

DVD-V

Select the language you prefer for the audio track (disc audio), subtitles,
and the disc menu.

Original: Refers to the original language in which the disc was
recorded.

Other: To select another language, press number buttons then ENTER
to enter the corresponding 4-digit number according to the language
code list in the reference chapter. If you enter the wrong language code,
press CLEAR.

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

DISPLAY

DISPLAY

16 : 9

Wide

Widescreen

OffProgressive Scan

Move

Select

TV ASPECT

TV Aspect

Display Mode

TV Output Select RGB

DVD-V

4:3: Select when a standard 4:3 TV is connected.
16:9 Wide: Select when a 16:9 wide TV is connected.

DISPLAY MODE

DVD-V

Display Mode setting works only when the TV Aspect mode is
set to “4:3”.

Letterbox: Displays a wide picture with bands on the upper and lower
portions of the screen.

Panscan: Automatically displays the wide picture on the entire screen
and cuts off the portions that do not fit.

ITALIANO

PORTUGUÊS

SVENSKA

13

Installation and Setup

BEFORE OPERATION

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

ESPAÑOL

PROGRESSIVE SCAN

Progressive Scan Video provides the highest quality pictures with less
flickering.
If you are using the Component Video jacks for connection to a TV or
monitor that is compatible with a progressive scan signal, set Progressive
Scan to On.

TO TURN ON PROGRESSIVE SCAN:

Connect Component out of the DVD to the input of your
monitor/television, set your television or monitor to Component Input.
1 Select “Progressive Scan” on the DISPLAY menu then press .

DISPLAY

TV Aspect

Display Mode

TV Output Select

Progressive Scan On was selected.
Press 'Enter' to confirm.

Enter

Cancel

OnProgressive Scan

Off

Move

EnterPrev.

2 Select “On” using the buttons.
3 Press ENTER to confirm your selection. The confirm menu will

appear.

NOTE

If your TV does not accept the Progressive Scan format, the picture
will appear scrambled if you try Progressive Scan on the DVD Player.

TV OUTPUT SELECT

Set the player’s TV Output Select options according to the TV
connection type.

YPbPr: When your TV is connected with the COMPONENT VIDEO
OUT/PROGRESSIVE SCAN jacks on the DVD player.
RGB: When your TV is connected with the SCART (RGB signal) jack.

AUDIO

Each DVD disc has a variety of audio output options. Set the player’s
AUDIO options according to the type of audio system you use.

AUDIO

DVD

Bitstream

Bitstream

PCM

48 kHz

OnDRC

Move

Select

Dolby Digital

DTS

MPEG

Sample Freq.

DOLBY DIGITAL / DTS / MPEG

BITSTREAM:

Select “Bitstream” if you connect the DVD Player’s
DIGITAL OUT jack to an amplifier or other equipment with a Dolby
Digital, DTS or MPEG decoder.

PCM (FOR DOLBY DIGITAL / MPEG):

Select when connected
to a two-channel digital stereo amplifier. DVDs encoded in Dolby
Digital or MPEG will be automatically downmixed to two-channel
PCM audio.

ITALIANO

PORTUGUÊS

SVENSKA

4 When the confirm menu appears on your screen Cancel is

highlighted as default. Use the buttons to highlight Enter.

5 Pressing ENTER will set the player to Progressive scan mode.

CAUTION

Once the setting for progressive scan output is entered, an image will
only be visible on a progressive scan compatible TV or monitor. If you set
Progressive Scan to On in error, you must reset the unit. First, remove the
disc in the DVD Player. Next, press STOP ( ) and hold it for five seconds
before releasing it. The video output will be restored to the standard
setting, and a picture will once again be visible on a conventional
analogue TV or monitor.

OFF (FOR DTS):

If you select “Off”, the DTS signal is not output

through the DIGITAL OUT jack.

SAMPLE FREQ. (FREQUENCY)

DVD-V

If your receiver or amplifier is NOT capable of handling 96 kHz
signals, select 48 kHz. When this choice is made, this unit
automatically converts any 96 kHz signals to 48 kHz so your system
can decode them.
If your receiver or amplifier is capable of handling 96 kHz signals,
select 96 kHz. When this choice is made, this unit passes each type
of signal through without any further processing.

Check the documentation for your amplifier to verify its capabilities.

14

DYNAMIC RANGE CONTROL (DRC)

DVD-V

With the DVD format, you can hear a program’s soundtrack in the
most accurate and realistic presentation possible, thanks to digital
audio technology. However, you may wish to compress the dynamic
range of the audio output (the difference between the loudest
sounds and the quietest ones). This allows you to listen to a movie
at a lower volume without losing clarity of sound. Set DRC to On
for this effect.

OTHERS

The PBC, Auto Play, B.L.E. settings can be changed.

OTHERS

PBC

Auto Play

On

Off

OnB.L.E.

Select

Move

Installation and Setup

BEFORE OPERATION

B.L.E. (BLACK LEVEL EXPANSION)

To select the black level of playback pictures. Set your preference and
monitor’s ability.

On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)

NOTE

The B.L.E. function works on NTSC systems only.

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

VCD

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio CDs.

AUTO PLAY

DVD-V

You can set up the DVD Player so a DVD disc automatically starts
playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will search for the title
that has the longest playback time and then play back the title
automatically.

On: Auto Play function is active.
Off: Auto Play function is not active.

NOTE

The Auto Play function may not work for some DVDs.

ITALIANO

PORTUGUÊS

15

SVENSKA

Installation and Setup

BEFORE OPERATION

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

ESPAÑOL

LOCK (PARENTAL CONTROL)

LOCK

Unlock

New

UK

Move

Select

RATING

Rating

Password

Country Code

DVD-V

Some movies contain scenes that may not be suitable for children to
view. Many of these discs contain parental control information that
applies to the complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the country. Some
discs offer more suitable scenes as an alternative.

The parental control feature allows you to block access to scenes
below the rating you input, thereby preventing your children from
being able to view material you believe is unsuitable.

1 Select “Rating” on the LOCK menu then press .
2 To access the Rating, Password and Country Code features, you

must input the 4-digit security code you created. If you have not yet
entered a security code you are prompted to do so.
Input a 4-digit code and press ENTER. Enter it again and press ENTER
to verify. If you make a mistake before pressing ENTER, press CLEAR.

3 Select a rating from 1 to 8 using the buttons.

Rating 1-8

Rating one (1) has the most restrictions and rating eight (8) is the
least restrictive

Unlock

If you select unlock, parental control is not active and the disc plays
in full.

PASSWORD (SECURITY CODE)

You can enter or change password.

1 Select Password on the LOCK menu then press .
2 Follow step 2 as shown left (Rating). “Change” or “New” is

highlighted.

3 Enter the new 4-digit code, then press ENTER. Input it again to verify.
4 Press SETUP to exit the menu.

If you forget your Security Code

If you forget your security code you can clear it using the following
steps:

1 Press SETUP to display the Setup menu.
2 Input the 6-digit number “210499” and the security code is cleared.
3 Enter a new code as described above.

COUNTRY CODE

DVD-V

Enter the code of the country/area whose standards were used to
rate the DVD video disc, based on the list in the reference chapter.

1 Select “Country Code” on the LOCK menu then press .
2 Follow step 2 as shown in the left column (Rating).
3 Select the first character using buttons.
4 Press ENTER and select the second character using buttons.
5 Press ENTER to confirm your country code selection.

ITALIANO

PORTUGUÊS

SVENSKA

NOTE

If you set a rating for the player, all disc scenes with the same
rating or lower are played. Higher rated scenes are not played
unless an alternate scene is available on the disc. The alternative
must have a lower rating. If no suitable alternative is found,
playback stops. You must enter the 4-digit password or change
the rating level in order to play the disc.

4 Press ENTER to confirm your rating selection, then press SETUP to

exit the menu.

16

Operation

OPERATION WITH DVD AND VIDEO CD

PLAYING A DVD OR VIDEO CD
PLAYBACK SETUP

You can enter or change password.
1 Turn on the TV and select the video input source connected to the

DVD player.

2 Turn on the audio system (if applicable) and select the input source

connected to the DVD player.

3 Press OPEN/CLOSE to open the disc tray and load your chosen disc

in the tray, with the playback side down.

4 Press OPEN/CLOSE to close the tray. Playback starts automatically. If

playback does not start, press PLAY.

In some cases, the disc menu might appear instead:

DVD-V

Use the buttons to select the title/chapter you want to
view, then press ENTER to start.
Press TITLE or DVD MENU to return to the menu screen.

VCD

Use the number buttons to select the track you want to view and
press RETURN to return to the menu screen. Menu settings and
operating procedures may differ. Follow the instructions on the each
menu screen. You also may set PBC to Off (See “PBC” on page 15).

GENERAL FEATURES

NOTES

Unless stated otherwise, all operations described use the remote
control. Some features may also be available on the Setup menu.

MOVING TO ANOTHER TITLE/GROUP

When a disc has more than one title/group, you can move to another
title/group. Press DISPLAY while playback is stopped then the
appropriate number (0-9) or use to move to another
title/group. You can play any title by inputting its number while
playback is stopped.

MOVING TO ANOTHER CHAPTER/TRACK

DVD-V

When a title on a disc has more than one chapter or a disc has more
than one track, you can move to another chapter/track as follows:

• Press SKIP or briefly during playback to select the next

• Press SKIP twice briefly to step back to the previous

• To go directly to any chapter during DVD playback, press DISPLAY

VCD

chapter/track or to return to the beginning of the current
chapter/track.

chapter/track.

and press to select the chapter/track icon. Then, input the
chapter/track number or use .

DVD-V

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

NOTES

• If parental control is set and the disc is not within the rating settings
you must input the password. (See “Lock Menu” on page 16.)

• DVDs may have a region code. Your player will not play discs that
have a region code different from your player. The region code for
this player is 2 (two).

SEARCH

1 Press SCAN ( or ) during playback..
2 Press SCAN ( or ) repeatedly to select the required speed.

3 To exit SEARCH mode, press PLAY.

CHANGING THE AUDIO CHANNEL

Press AUDIO repeatedly during playback to hear a different audio
channel (Stereo, Left, or Right).

DVD-V

DVD, X2, X4, X16 or X100
Video CD; X2, X4 or X8

VCD

VCD

ITALIANO

PORTUGUÊS

17

SVENSKA

Operation

OPERATION WITH DVD AND VIDEO CD

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

ESPAÑOL

ITALIANO

STILL PICTURE AND FRAME-BY-FRAME PLAYBACK

DVD-V

1 Press PAUSE/STEP on the remote control during playback. Advance

2 To exit still motion mode, press PLAY.

SLOW MOTION

1 Press PAUSE/STEP ( ) during playback.

2 Use the SCAN ( or ) to select the required speed: 1/ 16,

3 To exit Slow Motion mode, press PLAY ( ).

NOTE

• Slow motion playback in reverse is not possible with Video CDs.

RANDOM

1 Press RANDOM during playback. The unit automatically begins

2 Press RANDOM again to return to normal.

TIP

By pressing SKIP during random playback, the unit selects
another title (track) and resumes random playback.

NOTE

On a Video CD with PBC, You must set PBC to Off on the setup menu
to use the random function
(See “PBC” on page 15).

REPEAT A-B

To repeat a sequence.

1 Press A-B at your chosen starting point. “ A * ” appears briefly on

2 Press A-B again at your chosen end point. “A B” appears briefly on

3 Press A-B again to cancel.

VCD

the picture frame-by-frame by pressing PAUSE/STEP repeatedly.

DVD-V

The DVD player will now go into PAUSE mode.

1/8, 1/4, or 1/2 (backward), or 1/16, 1/8,
1/4, or 1/2 (forward).
With Video CD, the Slow speed changes: 1/16, 1/8, 1/4
or 1/2 (forward).

VCD

random playback and RANDOM appears on the TV screen.

DVD-V

the TV screen.

the TV screen and the repeat sequence begins.

VCD

VCD

REPEAT

You can play a title/chapter/all/track/group on a disc. Press REPEAT
during playback to select a desired repeat mode.

DVD VIDEO DISCS - REPEAT CHAPTER/TITLE/OFF

1 Chapter: repeats the current chapter.
2 Title: repeats the current title.
3 Off: does not play repeatedly.

VIDEO CDS, - REPEAT TRACK/ALL/OFF

1 Track: repeats the current track
2 All: repeats all the tracks on a disc.
3 Off: does not play repeatedly.

NOTES

• On a Video CD with PBC, you must set PBC to Off on the setup

• If you press SKIP ( ) once during Repeat Chapter (Track) playback,

3D SURROUND

To produce a 3D surround effect that simulates multi- channel audio
from two stereo speakers (instead of the five+ speakers normally
required for multi-channel audio from a home theatre system).

1 Press DISPLAY during playback.
2 Use to select the sound option.

3 Use to select “3D SUR”.

TIME SEARCH

To start playing at any chosen time on the disc:

1 Press DISPLAY during playback. The time search box shows the

2 Press to select the time clock icon and “-:--:--” appears.
3 Input the required start time in hours, minutes, and seconds from

4 Press ENTER to confirm. Playback starts from the selected time.

DVD-V

menu to use the repeat function (See “PBC” on page 15).

the repeat playback cancels.

The sound option will be highlighted.

To turn off the 3D Surround effect, select “Normal”.

elapsed playing time.

left to right. If you enter the wrong numbers, press CLEAR to remove
the numbers you entered. Then input the correct numbers.

VCD

DVD-V

DVD-V

VCD

VCD

PORTUGUÊS

SVENSKA

18

Operation

OPERATION WITH DVD AND VIDEO CD

ZOOM

Use zoom to enlarge the video image.

1 Press ZOOM during playback or still playback to activate the Zoom

2 Each press of the ZOOM button changes the TV screen in the

3 Use the buttons to move through the zoomed picture.
4 To resume normal playback, press CLEAR.

NOTES

• Zoom may not work on some DVDs.

• Screen fit mode is available for playing the DVD disc, VR disc and

MARKER SEARCH

To enter a Marker

You can start playback from up to nine memorized points. To enter a
marker, press MARKER at the desired point on the disc. The Marker icon
appears on the TV screen briefly. Repeat to enter up to nine markers.

To Recall or Clear a Marked Scene
1 During disc playback, press SEARCH. The marker search menu

2 Within 10 seconds, press to select a marker number that you

3 Press ENTER and playback starts from the marked scene. Or, Press

4 You can play any marker by inputting its number on the marker

PAUSE
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY.

DVD-V

function. The square frame appears briefly in the right bottom of the
picture.

sequence: 100% size ➜ 400% size ➜ 1600% size ➜ screen fit
mode ➜ 100% size
Screen fit mode:
You can change the way the image appears on the screen when
you’re playing a DVD movie. Press to select between Normal,
Enhanced, and Maximum.

movie file.

appears on the screen.

want to recall or clear.

CLEAR and the marker number is erased from the list.

search menu.

DVD-V

VCD

VCD

DVD-V

VCD

SPECIAL DVD FEATURES
CHECKING THE CONTENTS OF DVD DISCS: MENUS

DVDs may offer menus that allow you to access special features. To
use the disc menu, press DVD MENU. Input the corresponding number
or use the buttons to highlight your selection.
Then press ENTER.

TITLE MENU

1 Press TITLE. If the current title has a menu, the menu appears on the

screen. Otherwise, the disc menu may appear.

2 The menu offers features such as camera angles, spoken language

and subtitle options, and chapters for the title.

3 Press TITLE to exit.

DISC MENU

1 Press DVD MENU and the disc menu is displayed.
2 Press DVD MENU again to exit.

CAMERA ANGLE

If the disc contains scenes recorded at different camera angles, you can
change to a different camera angle during playback. Press ANGLE
repeatedly during playback to select a desired angle. Note that the
number of the current angle appears on the display.

TIP

The angle indicator will blink on the TV screen during scenes
recorded at different angles as an indication that angle switching is
possible.

CHANGING THE AUDIO LANGUAGE

DVD-V

Press AUDIO repeatedly during playback to hear a different audio
language or audio track.
With DVD-RW discs recorded in VR mode that have both a main and a
Bilingual audio channel, you can switch between Main (L), Bilingual (R),
or a mix of both (Main + Bilingual) by pressing AUDIO.

SUBTITLES

Press SUBTITLE repeatedly during playback to see the different subtitle
languages.

DVD-V

DVD-V

DVD-V

DVD-V

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

19

ITALIANO

PORTUGUÊS

SVENSKA

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

ESPAÑOL

Operation

OPERATION WITH AUDIO CD AND MP3 / WMA DISC

MP3 / WMA disc compatibility with this player is limited as

PLAYING AN AUDIO CD OR MP3/WMA DISC

The DVD player can play MP3/WMA formatted recordings on CD-ROM,
CD-R, or CD-RW discs.

AUDIO CD

Once you insert an audio CD a menu appears on the TV screen.
Press to select a track then press PLAY or ENTER and playback
starts.

AUDIO CD

0:52:07

1 / 12

Track 1

Track 2

Track 3

Track 4

Track 5

Track 6

Track 7

Track 8

List

PROGRAM

Program

Clear All

Edit

MP3 / WMA

1 Press to select a folder, and press ENTER to see the folder

contents.

2 Press to select a track then press PLAY or ENTER. Playback

starts.

MUSIC

0:00:00

1 / 12

1-Music1

2-Music2

3-Music3

4-Music4

5-Music5

6-Music6

7-Music7

DISPLAY

List

Info

PROGRAM

Program

Clear All

Edit

follows:
1 Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48 kHz

(WMA)

2 Bit rate: within 8 - 320kbps (MP3), 32 - 192kbps (WMA)
3 The player cannot read an MP3/WMA file that has a file extension

other than “.mp3” / “.wma”.

4 CD-R physical format should be ISO 9660
5 If you record MP3 / WMA files using software that cannot create a

file system (eg. Direct-CD) it is impossible to playback MP3 / WMA
files. We recommend that you use Easy-CD Creator, which creates
an ISO 9660 file system.

6 File names should have a maximum of 8 letters and must

incorporate an .mp3 or .wma extension.

7 They should not contain special letters such as / ? * : “ < > l etc.
8 The total number of files on the disc should be less than 650.

This DVD player requires discs and recordings to meet certain
technical standards in order to achieve optimal playback quality. Pre­recorded DVDs are automatically set to these standards. There are
many different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain pre-existing
conditions (see above) to ensure compatible playback.

Customers should note that permission is required in order to
download MP3 / WMA files and music from the Internet. NAD
ELECTRONICS INTERNATIONAL has no right to grant such
permission. Permission should always be sought from the
copyright owner.

ITALIANO

PORTUGUÊS

SVENSKA

ID3 TAG

• When playing a file containing information such as track titles, you
can see the information by pressing DISPLAY.
[ Title, Artist, Album, Year, Comment ]

• If there is no information, “NO ID3 TAG” appear on the display.

TIP

• If you are in a file list on the MUSIC menu and want to return to the
Folder list, use the to highlight and press ENTER.

• Press DVD MENU to move to the next page.

• On a CD with MP3/WMA and JPEG, you can switch between

MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO at the top
of the menu is highlighted.

20

Operation

OPERATION WITH AUDIO CD AND MP3 / WMA DISC

AUDIO CD AND MP3 / WMA DISC FEATURES

PAUSE

1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY, ENTER or press PAUSE/STEP again.

MOVING TO ANOTHER TRACK

1 Press SKIP ( or ) briefly during playback to go to the next

track or to return to the beginning of the current track.

2 Press SKIP twice briefly to go back to the previous track.
3 You can play any track by inputting its number (CD only).

REPEAT TRACK/ALL/OFF

You can play a track/all on a disc.

1 Press REPEAT when playing a disc. The repeat icon appears.
2 Press REPEAT to select a desired repeat mode.

Track: repeats the current track
All: repeats all the tracks on a disc.
Off(No display): does not play repeatedly.

NOTE

If you press SKIP ( ) once during Repeat Track playback, the repeat
playback cancels.

SEARCH

1 Press SCAN ( or ) during playback.
2 Press SCAN ( or ) repeatedly to select the required speed:

X2, X4, X8 backward or forward.

3 To exit SEARCH mode, press PLAY.

MP3CD

WMA

MP3CD

MP3CD

MP3CD

WMA

WMA

WMA

RANDOM

1 Press RANDOM during playback. Random Playback begins

immediately and RANDOM appears on the menu screen.

2 To return to normal playback, press RANDOM repeatedly until

RANDOM disappears from the menu screen.

TIP

By pressing SKIP: during random playback, the unit selects
another track and resumes random playback.

REPEAT A-B

1 To repeat a sequence during disc playback press A-B at your chosen

starting point. The Repeat icon and “A” appear on the menu screen.

2 Press A-B again at your chosen end point. The Repeat icon and

“A-B” appear on the menu screen, and the sequence begins to play
repeatedly.

3 To exit the sequence and return to normal play, press A-B again. The

Repeat icon disappears from the menu screen.

3D SURROUND

To produce a 3D surround effect that simulates multi- channel audio
from two stereo speakers (instead of the five+ speakers normally
required for multi-channel audio from a home theatre system).
1 Press AUDIO during playback.

“3D SUR.” appears on the menu screen.

2 To return to normal playback, press AUDIO repeatedly until

“3D SUR.” disappears from the menu screen.

MP3CD

CD

CD

WMA

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

21

ITALIANO

PORTUGUÊS

SVENSKA

Operation

PROGRAMMED PLAYBACK

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

The program function enables you to store your favourite tracks from
any disc in the player memory. A program can contain 30 tracks.

1 Insert a disc.

Audio CD or MP3/WMA Discs:

AUDIO CD or MUSIC menu appears.

2 Press PROGRAM.

E

The mark will appear to the right of the word“ Program” on the
right side of the menu screen.

NOTE

Press PROGRAM again, then the mark will disappear to exit the

E

Program Edit mode.

1-Music1

2-Music2

3-Music3

4-Music4

5-Music5

6-Music6

7-Music7

MUSIC

0:00:00

List

DISPLAY

1 / 12

PROGRAM

Info

Edit

2-Music2

4-Music4

6-Music6

1-Music1

Program

E

Clear All

AUDIO CD

0:52:07

List

Track1

Track2

Track3

Track4

Track5

Track6

Track7

Track8

1 / 12

PROGRAM

Edit

E

Program

Track5

Track7

Track4

Track1

Clear All

Audio CD Menu MP3/WMA Menu

VIDEO CD

Press PROGRAM while playback is stopped. The program menu
appears. Press PROGRAM again and hold it down for a few seconds to
exit the menu.

5 Press PLAY or ENTER to start. Playback begins in the order in which

you programmed the tracks. Playback stops after all of the tracks on
the “Program” list have played once.

6 To resume normal playback from programmed playback, select a

track of AUDIO CD (or MUSIC) list and then press PLAY.

REPEAT PROGRAMMED TRACKS

1 Press REPEAT when playing a disc. The repeat icon appears.
2 Press REPEAT to select a desired repeat mode.

Track: repeats the current track
All: repeats all the tracks on the programmed list.
Off (No display): does not play repeatedly.

NOTE

If you press : once during Repeat Track playback, the repeat
playback cancels.

ERASING A TRACK FROM PROGRAM LIST

1 Use to select the track that you wish to erase from the

Program list.

2 Press CLEAR. Repeat to erase additional tracks on the list.

ERASING THE COMPLETE PROGRAM LIST

1 Press to move to the “Program” list.
2 Use to select “Clear All”, then press ENTER.

NOTE

The programs are also cleared when the disc is removed.

ESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

NOTE

On a Video CD with PBC, you must set PBC to Off on the setup menu
to use the programmed playback (See “PBC” on page 15).

VIDEO CD

List

Track1

Track2

Track3

Track4

Track5

E

Program

Track5

Track2

Track3

Track1

Clear All

Video CD Menu

3 Select a track on the “List”, then press ENTER to place the selected

track on the “Program” list. Repeat to place additional tracks on the
list.

4 Press .

Select the track you want to start playing on the “Program” list.

22

Operation

OPERATION WITH JPEG DISC

VIEWING A JPEG DISC

Using this DVD Player you can view Kodak PICTURE CDs and discs with
JPEG files.
1 Insert a disc and close the tray. The PHOTO menu appears on the TV

screen.

PHOTO

List

JPEG Folder 1

JPEG Folder 2

JPEG Folder 3

JPEG Folder 4

JPEG Folder 5

JPEG Folder 6

JPEG Folder 7

JPEG Folder 8

Preview

2 Press to select a folder, and press ENTER. A list of files in the

folder appears. If you are in a file list and want to return to the
previous Folder list, use the buttons on the remote to highlight

and press ENTER.

3 If you want to view a particular file, press to highlight a file and

press ENTER or PLAY. Viewing the file proceeding starts. While
viewing a file, you can press STOP to move to the previous menu
(PHOTO menu).

TIP

• Press DVD MENU to move to the next page.

• There are three Slide Speed options :

>>> (Fast), >> (Normal), and > (Slow).

Use to highlight the Speed. Then, use to select the
option you want to use then press ENTER.

• On a disc with MP3/WMA and JPEG, you can switch between
MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO at the top
of the menu is highlighted.

• Press RETURN, file information is hidden.

SLIDE SHOW

JPEG

Use to highlight the (Slide Show) then press ENTER.

STILL PICTURE

JPEG

1 Press PAUSE/STEP during slide show. The player will now go into

PAUSE mode.

2 To return to the slide show, press PLAY or press PAUSE/STEP again.

MOVING TO ANOTHER FILE

JPEG

Press SKIP ( or ) or cursor ( ) once while viewing a picture
to advance to the next or previous file.

ZOOM

JPEG

Use zoom to enlarge the photo image.
(see page 19)

TO ROTATE PICTURE

JPEG

Press during showing a picture to rotate the picture clockwise or
counter clockwise.

TO LISTEN TO MP3/WMA MUSIC WATCHING PICTURE

JPEG

You can display files while listening to MP3/WMA music files recorded
on the same disc.

1 Insert the disc containing the two types of files in the player.
2 Press TITLE to display PHOTO menu.
3 Press to select a photo file.
4 Use to select icon then press ENTER. Playback starts.

The playback will continue until STOP is pressed.

TIP

To listen to only the desired music watching picture, programmed the
desired tracks from the “MUSIC” menu and then proceed as above.

JPEG DISC COMPATIBILITY WITH THIS PLAYER IS LIMITED AS
FOLLOWS:

• Depending upon the size and number of JPEG files, it could take a
long time for the DVD player to read the disc’s contents. If you don’t
see an on- screen display after several minutes, some of the files may
be too large — reduce the resolution of the JPEG files to less than
2M pixels as 2760 x 2048 pixels and burn another disc.

• The total number of files and folders on the disc should be less
than 650.

• Some discs may be incompatible due to a different recording format
or the condition of the disc.

• Ensure that all the selected files have the “.jpg” extensions when
copying into the CD layout.

• If the files have “.jpe” or “.jpeg” extensions, please rename them as
“.jpg” files.

• File names without a “.jpg” extension will not be able to be read by
this DVD player even though the files are shown as JPEG image files
in Windows Explorer.

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

ITALIANO

23

PORTUGUÊS

SVENSKA

Operation

OPERATION WITH A DVD VR FORMAT DISC

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

This unit will play DVD-R/RW discs recorded using the DVD-Video
format that have been finalized using a DVD-recorder.

• This unit will play DVD-RW discs recorded using the Video Recording
(VR) format.

1 Insert a disc and close the tray. The DVD-VR menu appears on the

TV screen.

DVD-V R

2 Press to select a track then press PLAY or ENTER and playback

starts.

NOTES

• Unfinalized DVD-R/RW discs cannot be played in this player.

• Some DVD-VR disc are made with CPRM data by DVD RECORDER.
Player does not support these kinds of discs and display the “CHECK
DISC”.

WHAT IS ‘CPRM’?

CPRM is a copy protection system (with scramble system) only
allowing the recording of ‘copy once’ broadcast programs. CPRM
stands for Content Protection for Recordable Media.

MAINTENANCE AND SERVICE

Refer to the information in this chapter before contacting a service
technician.

HANDLING THE UNIT

When shipping the unit

Please save the original shipping carton and packing materials. If you
need to ship the unit, for maximum protection, re-pack the unit as it was
originally packed at the factory.

Keeping the exterior surfaces clean

• Do not use volatile liquids such as insecticide spray near the unit.

• Do not leave rubber or plastic products in contact with the unit for
a long period of time. since they leave marks on the surface.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the surfaces are extremely
dirty, use a soft cloth lightly moistened with a mild detergent solution.

Do not use strong solvents such as alcohol, benzine, or thinner, as these
might damage the surface of the unit.

Maintaining the Unit

The DVD player is a high-tech, precision device. If the optical pick-up
lens and disc drive parts are dirty or worn, the picture quality could be
diminished.

Depending on the operating environment, regular inspection and
maintenance are recommended after every 1,000 hours of use.

ESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

For details, please contact your nearest authorized service centre.

24

Operation

ADDITIONAL INFORMATION

ADDITIONAL FEATURES

LAST SCENE MEMORY

DVD-V

This player memorizes the last scene from the last disc that is viewed.
The last scene remains in memory even if you remove the disc from the
player or switch off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.

NOTE

SCREEN SAVER

The screen saver appears when you leave the DVD player in Stop mode
for about five minutes. If the Screen Saver is displayed for five minutes,
the DVD Player automatically turns itself off.

VCD

This player does not memorize the scene of a disc if you switch off
the player before commencing to play the disc.

VIDEO MODE SETTING

• With certain discs, the playback picture may be flickering or Dot
Crawl is shown on straight lines. That means Vertical interpolation or
De-interlace is not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the video mode.

• To change the video mode, press and hold DISPLAY about 3 seconds
during disc playback. The new video mode number selected is
displayed on the TV screen. Check whether the video quality has
improved. If not, repeat the above procedure until picture quality is
improved.

• Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE1

• If you turn off the power, the video mode will be back to initial state
(MODE1).

TIP

DETAILED DESCRIPTIONS FOR VIDEO MODES

MODE1: The source material of the DVD video (film material or video
material) is determined from disc information.
MODE2: Suitable for playing film based content or video based material
recorded by the progressive scan method.
MODE3: Suitable for playing video based content with comparatively
little motion.

NOTE

The video mode setting only works when the Progressive Scan mode
is set to “On” in the Setup menu.

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

SYSTEM SELECT

You must select the appropriate system mode for your TV system. If NO
DISC appears in the display window, press and hold PAUSE on the front
panel for more than 5 seconds to be able to select a system
(PAL, NTSC, or AUTO).

ITALIANO

PORTUGUÊS

25

SVENSKA

ENGLISH FRANÇAIS

Reference

TROUBLESHOOTING

Check the following guide for the possible cause of a problem before contacting service.

DEUTSCH

NEDERLANDS

ESPAÑOL

SYMPTOM

No power.

The power is on, but the DVD player does not
work.

No picture.

No sound.

The DVD player does not start playback.

CAUSE

• The power cord is disconnected.

• No disc is inserted.

• The TV is not set to receive DVD signal output.

• The video cable is not connected securely.

• The equipment connected with the audio cable
is not set to receive DVD signal output.

• The power of the equipment connected with the
audio cable is turned off.

• The AUDIO options are set to the wrong
position.

• An unplayable disc is inserted.

• The rating level is set.

CORRECTION

• Plug the power cord securely into the mains
socket.

• Insert a disc. (Check that the DVD or, audio CD
indicator in the display window is lit.)

• Select the appropriate video input mode on
the TV.

• Connect the video cable securely.

• Select the correct input mode of the audio
receiver so you can listen to the sound from the
DVD player.

• Turn on the equipment connected with the
audio cable.

• Set the Digital Audio Output to the correct
position, then turn on the DVD player again by
pressing POWER.

• Insert a playable disc. (Check the disc type, color
system, and regional code.)

• Cancel the rating function or change the rating
level.

ITALIANO

PORTUGUÊS

SVENSKA

The remote control does not work properly.

• The remote control is not pointed at the remote
sensor on the DVD player.

• The remote control is too far from the DVD
player.

• Point the remote control at the remote sensor of
the DVD player.

• Operate the remote control closer to the DVD
player.

26

TABLE OF LANGUAGES AND THEIR CODES

Language Code List
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.

Code Language Code Language Code Language Code Language

6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese
6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak
6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian
8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali
6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish
6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese
7289 Armenian 6869 German 7784 Maltese 8387 Swahili
6583 Assamese 6976 Greek 7773 Maori 8386 Swedish
6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog
6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik
6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil
6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar
6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu
6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai
6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan
6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya
6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga
7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish
6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen
7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi
6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian
9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu
6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek
7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese
6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapük
6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh
7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof
6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa
6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish
6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba
7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu

Reference

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

27

ITALIANO

PORTUGUÊS

SVENSKA

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

ESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

Reference

COUNTRY CODE LIST

Choose a country code from this list.

Code Country Code Country Code Country Code Country

AD Andorra ER Eritrea LC Saint Lucia SC Seychelles
AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan
AF Afghanistan ET Ethiopia LK Sri Lanka SE Sweden

AG Antigua and Barbuda FI Finland LR Liberia SG Singapore

AI Anguilla FJ Fiji LS Lesotho SH Saint Helena

AL Albania FK Falkland Islands LT Lithuania SI Slovenia

AM Armenia FM Micronesia LU Luxembourg SJ

AN Netherlands Antilles FO Faroe Islands LV Latvia Islands
AO Angola FR France LY Libya SK Slovak Republic
AQ Antarctica FX France (European MA Morocco SL Sierra Leone

AR Argentina Territory) MC Monaco SM San Marino

AS American Samoa GA Gabon MD Moldavia SN Senegal

AT Austria GB Great Britain MG Madagascar SO Somalia

AU Australia GD Grenada MH Marshall Islands SR Suriname
AW Aruba GE Georgia MK Macedonia ST Saint Tome and Principe

AZ Azerbaidjan GF French Guyana ML Mali SU Former USSR

BA Bosnia-Herzegovina GH Ghana MM Myanmar SV El Salvador

BB Barbados GI Gibraltar MN Mongolia SY Syria

BD Bangladesh GL Greenland MO Macau SZ Swaziland

BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands

BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad
BG Bulgaria GP Guadeloupe (French) MR Mauritania TF French Southern
BH Bahrain GQ Equatorial Guinea MS Montserrat Territories

BI Burundi GR Greece MT Malta TG Togo

BJ Benin GS S. Georgia & MU Mauritius TH Thailand

BM Bermuda S. Sandwich Isls. MV Maldives TJ Tadjikistan

BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau
BO Bolivia GU Guam (USA) MX Mexico TM Turkmenistan
BR Brazil GW Guinea Bissau MY Malaysia TN Tunisia

BS Bahamas GY Guyana MZ Mozambique TO Tonga

BT Bhutan HK Hong Kong NA Namibia TP East Timor
BV Bouvet Island HM Heard and McDonald NC New Caledonia (French) TR Turkey

BW Botswana Islands NE Niger TT Trinidad and Tobago

BY Belarus HN Honduras NF Norfolk Island TV Tuvalu

BZ Belize HR Croatia NG Nigeria TW Taiwan
CA Canada HT Haiti NI Nicaragua TZ Tanzania
CC Cocos (Keeling) Islands HU Hungary NL Netherlands UA Ukraine
CF Central African Republic ID Indonesia NO Norway UG Uganda

CG Congo IE Ireland NP Nepal UK United Kingdom

CH Switzerland IL Israel NR Nauru UM USA Minor Outlying

CI Ivory Coast IN India NU Niue Islands
CK Cook Islands IO British Indian Ocean NZ New Zealand US United States
CL Chile Territory OM Oman UY Uruguay

CM Cameroon IQ Iraq PA Panama UZ Uzbekistan

CN China IR Iran PE Peru VA Vatican City State

CO Colombia IS Iceland PF Polynesia (French) VC Saint Vincent &

CR Costa Rica IT Italy PG Papua New Guinea Grenadines
CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela
CU Cuba JO Jordan PK Pakistan VG Virgin Islands (British)
CV Cape Verde JP Japan PL Poland VI Virgin Islands (USA)
CX Christmas Island KE Kenya PM Saint Pierre and Miquelon VN Vietnam
CY Cyprus KG Kyrgyzstan PN Pitcairn Island VU Vanuatu
CZ Czech Republic KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands
DE Germany KI Kiribati PT Portugal WS Samoa

DJ Djibouti KM Comoros PW Palau YE Yemen
DK Denmark KN Saint Kitts & Nevis Anguilla PY Paraguay YT Mayotte

DM Dominica KP North Korea QA Qatar YU Yugoslavia
DO Dominican Republic KR South Korea RE Reunion (French) ZA South Africa

DZ Algeria KW Kuwait RO Romania ZM Zambia
EC Ecuador KY Cayman Islands RU Russian Federation ZR Zaire

EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe
EG Egypt LA Laos SA Saudi Arabia
EH Western Sahara LB Lebanon SB Solomon Islands

Svalbard and
Jan Mayen

28

GENERAL

SYSTEM

OUTPUTS

Power requirements AC 110-240 V, 50/60 Hz
Power consumption 12 W

Dimensions (approx.) 430 x 39 x 242 mm (W x H x D) without foot

Weight (approx.) 2.2 kg

Operating temperature 5 °C to 35 °C (41 °F to 95 °F)

Operating humidity 5 % to 90 %

Laser Semiconductor laser, wavelength 650 nm

Signal system PAL/NTSC

Frequency response DVD (PCM 96 kHz): 8 Hz to 44 kHz

DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz

Signal-to-noise ratio More than 100 dB (ANALOG OUT connectors only)

Harmonic distortion Less than 0.008%

Dynamic range More than 90 dB (DVD/CD)

VIDEO OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1 /SCART (TO TV)

S-VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1

(C) 0.3 V (p-p) 75 Ω

COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1

(Cb/Pb)/(Cr/Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2

AUDIO OUT 2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 /SCART (TO TV)

DIGITAL OUT (COAXIAL) 0.5 V (p-p), 75 Ω, RCA jack x 1

DIGITAL OUT (OPTICAL) 3 V (p-p), 75 Ω, Optical Connector x 1

Reference

SPECIFICATIONS

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

ACCESSORIES

Video cable 1

Audio cable 1

Remote control 1

Batteries 2

Note: Design and specifications are subject to change prior notice.

ITALIANO

PORTUGUÊS

SVENSKA

29

www.NADelectronics.com

©2005 NAD ELECTRONICS INTERNATIONAL

A DIVISION OF LENBROOK INDUSTRIES LIMITED

All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International

T 514 Manual C Version 02/05