Motorola MBP854CONNECT, MBP854CONNECT-2, MBP854CONNECT-3, MBP854CONNECT-4 Instruction manual
User’s Guide
Digital Video Baby Monitor With Wi-Fi® Internet Viewing
Models: MBP854CONNECT, MBP854CONNECT-2,
MBP854CONNECT-3, MBP854CONNECT-4
The features described in this User’s Guide are subject to modifications without prior notice.
Welcome...
to your new Motorola Digital Video Baby Monitor!
Thank you for purchasing your new Motorola Digital Video Baby Monitor.
Now you can see and hear your baby sleeping in another room or you can
monitor your older children in their playroom.
Please retain your original dated sales receipt for your records.
For warranty service of your Motorola product, you will need to provide a
copy of your dated sales receipt to confirm warra nty status. Registration is
not required for warranty coverage.
For product related questions, please call:
US and Canada 1-888-331-3383
Email: support@motorolamonitors.com
This User's Guide provides you with all the information you need to get the
most from your product.
Before you can use the Baby Monitor, we recommend you insert and fully
charge the battery in the Parent Unit, so that it continues to work if you
disconnect it from the power supply to carry it to another location. Please
read the Safety Instructions on page 8 before you install the units.
Got everything?
• 1 x Parent Unit
• 1 x Baby Unit (Camera)
• 1 x Power adapter for the Parent Unit
• 1 x Power adapter(s) for the Baby Unit
In multi-camera packs, you will find one or more additional camera units
with power adapter units and battery packs.
Overview of the Parent Unit
RESET
111413
12
16
15
21
2
3
4
5
6
1. Display (LCD screen)
2. Video ON/OFF Key V
Press to turn ON/OFF the LCD
display
3. Tal k Key T
Press and hold to speak to your baby
4. Up Key +
Normal Mode: Tilt Up
Menu Mode: Up
5. Down Key -
Normal Mode: Tilt Down
Menu Mode: Down
6. Microphone
7. Menu Key M
Press to open the Menu options
8. OK Key O
9. Left Key <
Normal Mode: Pan Left
Menu Mode: Left
10. Right Key >
Normal Mode: Pan Right
Menu Mode: Right
7
8
9
10
1
20
17
19
18
11. Power Adapter / Battery LED BLUE
when connected to an electrical
outlet.
RED when battery low.
12. Unit ON/OFF LED (Green)
13. Audio Level LED (Green, Orange,
Red, Red)
14. Power Key 0
Press and Hold to turn the unit ON/
OFF
15. Volu me K ey
Press -/+ to decrease/increase
Volume level on Parent Unit
16. Reset Key
17. SD Card socket
18. Micro USB Socket
19. Stand
20. Speaker
21. Antenna
Lift the antenna for optimal
reception
Parent Unit menu icons
Signal Level (4 Levels)
Night Vision Mode (Screen changes to Black/White)
Tal k M od e
Battery Level Control (4 Levels)
Pan Left
Pan Rig ht
Til t U p
Til t D ow n
Zoom Level Control (1X, 2X)
Brightness Level Control (8 Levels)
Lullaby Control (5 Song Selections)
Alarm Setting (6h, 4h, 2h, Off)
Temperature Reading (HH ºC / ºF or LL ºC / ºF)
Icon & readings turn RED > 29ºC / 84ºF, and reading display
HH ºC / ºF > 36ºC / 97 ºF
Icon & readings turn RED < 14ºC / 57ºF, and reading display
LL ºC / ºF < 1ºC / 34 ºF
Cam Control (scan, view, add, delete)
Local Recordi ng (Record, Play)
Set Video On Timer (5 min, 30 min, 60 min)
Time Setting (Date, Time format 12/24 Hour and Time)
Volume Level Control (8 Levels)
SD Card detection
No Baby Unit detected
Overview of Your Baby Unit
1
2
3
4
5
6
7
5V 1.5A
1. Light Sensor (for night mode detection) 7. Speaker
2. Camera Lens 8. Antenna
3. Infrared LEDs (for night vision) 9. Micro USB socket
4. Power / Status indicator 10. ON/OFF Switch
5. Microphone 11. Temperature Sensor
6. PAIR Button
Important guidelines for installing your Baby Monitor
• To use your Video Monitor Baby and Parent Units together, you must be able to establish a
radio link between them, and the range will be affected by environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or
reinforced concrete between the Baby and Parent Unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls, or by radio
or electrical equipment, such as TVs, computers, cordless or mobile phones,
fluorescent lights or dimmer switches.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi
systems, or microwave ovens, may cause interference with this product, so keep the
Baby Monitor away at least 3ft from these types of products, or turn them off if they
appear to be causing interference.
• If the signal is weak, try lifting up the Parent Unit Antenna, moving the Parent and/or the
Baby Unit to different positions in the rooms.
®
routers), Bluetooth®
8
9
10
11
Table of contents
1. Safety Instructions..................................................................................... 8
2. Getting Started........................................................................................11
2.1 Baby Unit Power Supply............................................................................ 11
2.2 Parent Unit Power Supply......................................................................... 11
2.3 Registration (Pairing) ................................................................................ 13
3. Using the Baby Monitor...........................................................................14
3.1 Setting up ..................................................................................................14
3.2 Pan and Tilt................................................................................................ 14
3.3 Night Vision Mode .................................................................................... 14
3.4 Talk Mode.................................................................................................. 14
3.5 Video ON/OFF ......................................................................................... 14
3.6 Temperature Display (HH °C / °F or LL °C / °F)...................................... 15
4. Parent Unit Menu Options ......................................................................16
4.1 Volume ...................................................................................................... 16
4.2 Brightness.................................................................................................. 16
4.3 Lullaby ....................................................................................................... 16
4.4 Zoom ......................................................................................................... 16
4.5 Alarm ......................................................................................................... 16
4.6 Camera Control........................................................................................ 17
4.6.1 Add (pair) a camera .................................................................. 17
4.6.2 View a camera ...........................................................................17
4.6.3 Delete a camera ........................................................................ 18
4.6.4 Scan camera .............................................................................. 18
4.7 Temperature ............................................................................................. 18
4.8 Power Saving mode.................................................................................. 18
4.9 Video ......................................................................................................... 19
4.10 Time Setting .............................................................................................. 19
5. Wi-Fi Internet Viewing ............................................................................20
5.1 Minimum System Requirements.............................................................. 20
5.2 Getting started - Connecting Devices..................................................... 21
5.3 User Account and Camera Setup on Android™ Devices....................... 22
5.3.1 Power ON and Connect the Camera ...................................... 22
5.3.2 Download the Hubble for Motorola Monitors App .................. 22
5.3.3 Run the Hubble for Motorola Monitors App on
Android™ device ..................................................................... 23
5.3.4 Add Camera to your account ...................................................24
6 Table of contents
5.4 User Account and Camera Setup:
Working with iPhone
5.4.1 Power ON and Connect the Camera ......................................28
5.4.2 Download the Hubble for Motorola Monitors App ..................28
5.4.3 Run the Hubble App on your iPhone®/iPad® .........................29
5.4.4 Add the Camera to your account .............................................30
5.5 Camera Functions:
Working with devices for Android™ .......................................................35
5.5.1 Connecting the Camera to Power ...........................................35
5.5.2 Add more cameras ....................................................................35
5.5.3 Remove a Camera ....................................................................36
5.5.4 Change your Account Information ..........................................37
5.5.5 Camera settings ........................................................................38
5.5.6 General Settings ........................................................................39
5.5.7 Features of the Hubble App .....................................................40
5.6 Camera Functions:
Working with devices for iPhone®/iPad® ...............................................44
5.6.1 Add more cameras ....................................................................44
5.6.2 Remove a Camera ....................................................................45
5.6.3 Change your Account Information ..........................................46
5.6.4 Camera settings ........................................................................47
5.6.5 General settings ........................................................................47
5.6.6 Hubble for Motorola Monitors Settings ....................................49
5.6.7 Features of the Hubble App .....................................................50
5.7 Camera Functions:
Working with PC/Notebook.....................................................................54
®
/iPad® ..................................................................28
6. Disposal of The Device (environment)...................................................55
7. Cleaning ..................................................................................................56
8. Help..........................................................................................................57
9. General Information ................................................................................65
ENGLISH
Table of contents 7
1. Safety Instructions
WARNING:
Strangulation Hazard: Children have
STRANGLED in cords. Keep this cord
out of the reach of children (more than
3ft (1m) away). Never use extension
cords with AC Adapters. Only use the AC
Adapters provided.
8 Safety Instructions
WARNING
Baby Unit SET UP & USE:
● Determine a location for the Baby Unit that will provide the best view
of your baby in his/her crib.
● Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf
or mount the Unit to a wall securely using the keyhole slots under the
stand.
● NEVER place the Baby Unit or cords within the crib.
● Do not place the Baby Unit or cords in the crib or within reach of the
baby (the unit and cords should be more than 3 feet away).
This digital video Baby Monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the
User's Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Baby Monitor is not a substitute for responsible adult supervision.
• Keep this User’s Guide for future reference.
• Do not place the Baby Unit or cords in the crib or within reach of the baby
(the unit and cords should be more than 3 feet away)
• Keep the cords out of reach of children.
• Do not cover the Baby Monitor with a towel or blanket.
• Never use extension cords with power adapters. Only use the power
adapters provided.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Baby Monitor near water.
Safety Instructions 9
ENGLISH
• Do not install the Baby Monitor near a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and battery
pack.
• Only insert a battery pack of the same type.
• Do not touch the plug contacts with sharp or metal objects.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to their instructions.
Th e Un it s hall be i nst all ed a nd u sed suc h th at p art s of the use r’s b ody oth er t han the
hands are maintained at a distance of approximately 8 inches (20 cm) or more.
10 Safety Instructions
2. Getting Started
Switch to turn ON
the camera
Power adapter plug
2.1 Baby Unit Power Supply
ON OFF
1. Connect the small plug of the power adapter to the Baby Unit (camera) and
the other end to a suitable electrical outlet.
NOTE
Only use the enclosed power adapter (5V DC / 1500mA).
2. Slide the ON/OFF switch to the ON position. The power LED will light up
in blue.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2 Parent Unit Power Supply
IMPORTANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithiumion battery 1880mAh), please charge it for 16 hours before use.
1. Connect the micro USB plug of the power adapter to the Parent Unit and
the other end to a suitable electrical outlet. Only use the enclosed power
adapter (5V DC / 1500mA) with the micro USB plug.
ENGLISH
Getting Started 11
2. Press and hold the 0 POWER ON/OFF button for 1 second to turn ON the
Parent Unit.
3. Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the video captured by the Baby Unit.
4. If there is no connection or you are out of range, the video display will go
off and the unit will beep every 5 seconds. Move the Parent Unit closer to
the Baby Unit until the link is re-established.
5. Press and hold the
0 POWER ON/OFF button, until the progress bar
finishes scrolling, to turn OFF the Parent Unit.
NOTE
The battery icon turns RED to indicate that the battery is low, and it gives
a beep every 16 seconds. The battery needs to be recharged. The battery pack
takes about 12 hours to charge fully.
When charging
1. During power OFF, when adapter is plugged in, an adapter logo will
display on screen and a flashing battery logo will display for 15 sec. The
Blue LED at the top left corner will light up that indicates that the adapter is
plugged in.
2. During power ON, when adapter is plugged in, the battery icon on the
screen's top right corner will show that the battery is charging. The Blue
LED at the top left corner will light up to indicate that the adapter is
plugged in.
12 Getting Started
2.3 Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures
below:
1. Press the
2. Press the
the
3. Press the
O button to confirm.
4. Camera
button to select the desired Camera and press the
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
5. Press the
6. Press and hold the PAIR button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
M button of the Parent Unit and the menu bar will pop up.
< LEFT button or > RIGHT button until is highlighted, and
del/ add/ view/ scan
+ UP button or - DOWN button to select
will pop up, press the + UP button or - DOWN
menu will pop up.
add
, and press the
O button to start
O button to confirm.
ENGLISH
Getting Started 13
3. Using the Baby Monitor
3.1 Setting up
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the Baby Unit's head angle by rotating the camera up, down, left and
right until you are satisfied with the image in the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2 Pan and Tilt
The camera can be remotely controlled from the Parent Unit.
1. Press the
2. Press the
3.3 Night Vision Mode
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the top of the unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The icon will be displayed at the
top of the screen.
3.4 Talk Mode
Press and hold the T TALK button on the Parent Unit to talk to your baby through
the Baby Unit’s loudspeaker. The
screen.
3.5 Video ON/OFF
Press V VIDEO ON/OFF key to turn the LCD display on or off, but still leave the
audio monitor on.
+ UP button or - DOWN button to tilt upward or downward.
< LEFT button or > RIGHT button to pan left or right.
T icon will be displayed at the top of the LCD
14 Using the Baby Monitor
3.6 Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen. The readings will turn RED if
the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will
change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading
will change to LL °C / °F if the temperature goes below 1°C / 34°F.
ENGLISH
Using the Baby Mon itor 15
4. Parent Unit Menu Options
4.1 Volume
1. Press the Volume button - or + to adjust the volume level, the icon will
pop up and you can select the desired volume level from level 0~8. (The
default volume level setting is level 4.)
4.2 Brightness
1. Press the M button and the menu bar will pop up.
2. Press the
3. Press the
level from level 1 ~ 8. (The default brightness level setting is level 5.)
4.3 Lullaby
1. Press the M button and the menu bar will pop up.
2. Press the
3. Press the
the 5 lullabies available, or the cycle option to play all 5 songs in turn. If an
individual song is selected it will only play once. (The default setting is
lullaby OFF.)
4. Press
4.4 Zoom
1. Press the M button and the menu bar will pop up.
2. Press the
3. Press the
(The default setting is 1X.)
4.5 Alarm
1. Press the M button and the menu bar will pop up.
2. Press the
3. Press the
2h
4. If an alarm time is selected, the Parent Unit will beep for about 45 seconds
after every 6, 4 or 2 hour period.
< LEFT button or > button until is highlighted.
+ UP button or - DOWN button to select the desired brightness
< LEFT button or > button until is highlighted.
+ UP button or - DOWN button to select the desired song from
O on the selected lullabies to select the desired song sound level.
< LEFT button or > button until is highlighted.
+ UP button or - DOWN button to select the
1X
or 2X Zoom.
< LEFT button or > RIGHT button until is highlighted.
+ UP button or - DOWN button to select the alarm time (
). (The default setting is Alarm OFF.)
6h, 4h
,
16 Parent Unit Menu Options
4.6 Camera Control
4.6.1 Add (pair) a camera
1. Press the M button and the menu bar will pop up.
2. Press the
the
3. Press the
O button to confirm.
4. Camera will pop up, press the
button to select the desired Camera, and press the
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
5. Press and hold the PAI R button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and the picture from the camera appears.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2 View a camera
1. Press the M button and the menu bar will pop up.
2. Press the
the
3. Press the
O button to confirm.
4. Camera will pop up, press the
button to select desired Camere, and press the
picture from that camera.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press OK repeatedly to select Camera ,
< LEFT button or > RIGHT button until is highlighted, and
del/ add/ view/ scan
+ UP button or - DOWN button to select
menu will pop up.
add
, and press the
+ UP button or - DOWN
O button to start
< LEFT button or > RIGHT button until is highlighted and
del/ add/ view/ scan
+ UP button or - DOWN button to select
menu pops up.
view
, and press the
+ UP button or - DOWN
O button to view the
scan
.
ENGLISH
Parent Unit Menu Options 17
4.6.3 Delete a camera
1. Press the M button and the menu bar will pop up.
2. Press the
the
3. Press the
< LEFT button or > RIGHT button until is highlighted, and
del/ add/ view/ scan
+ UP button or - DOWN button to select
menu will pop up.
del
, and press the
O button to confirm.
4. Camera will pop up, press the
button to select the desired Camera, and press the
that registration.
Note:
You are not allowed to delete the camera if there is only one registered camera
in the system.
+ UP button or - DOWN
O button to delete
4.6.4 Scan camera
1. Press the M button and the menu bar will pop up.
2. Press the
the
3. Press the
< LEFT button or > RIGHT button until is highlighted, and
del/ add/ view/ scan
+ UP button or - DOWN button to select
menu will pop up.
scan
, and press the
O button to confirm.
4. The screen will then display images from different registered cameras in a
loop of Camera
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press OK repeatedly to select Camera ,
, changing about every 12 seconds.
scan
.
4.7 Temperature
1. Press the M button and the menu bar will pop up.
2. Press the
3. Press the
< LEFT button or > RIGHT button until is highlighted.
+ UP button or - DOWN button to select °C or °F.
4.8 Power Saving mode
1. Press the M button and the menu bar will pop up.
2. Press the
3. Press the
5 mins, 30 mins or 60 mins if not in charging.
< LEFT button or > RIGHT button until V is highlighted.
+ UP button or - DOWN button to select auto video off after
18 Parent Unit Menu Options
4.9 Video
You can record a video of your baby through this function, the videos will be
stored in the SD Memory Card, so please make sure the memory card has
enough free space to store the recording data.
1. Press the
2. Press the
3. Press the
button to start video recording, thence select press and press
button to stop.
4. Press the
button to play back the video.
Note:
The video format is AVI which you can view on a computer/smartphone/tablet
M button and the menu bar will pop up.
< LEFT button or > RIGHT button until is highlighted.
+ UP button or - DOWN button to select , and press O
O
+ UP button or - DOWN button to select and press O
4.10 Time Setting
1. Press the < LEFT button or > RIGHT button until is highlighted and
2. Press the
3. Press the
press
Time.
O Button.
< LEFT button or > RIGHT button to move between the settings.
+ UP button or - DOWN button to set Date, Time format and
ENGLISH
Parent Unit Menu Options 19
5. Wi-Fi Internet Viewing
5.1 Minimum System Requirements
Web Portal
• Windows® 7
• Mac OS
• Chrome™ 24
• Internet Explorer
• Safari
• Java™ 7
• Firefox
• Adobe
Android™ System
• Version 4.2 or above
iPhone®/iPad® iOS
• Version 7.0 or above
®
10.7
®
®
6
®
18.0
®
Flash® Player 15.0
9
20 Wi-Fi Internet Viewing
5.2 Getting started - Connecting Devices
View your Camera from any
compatible device remotely
How does it work?
When a user tries to access the Camera, our secure server authenticates the
user’s identity and permits access to the Camera.
Setup
Connect the Camera to the power adapter, then plug into an suitable electrical
outlet and make sure the power switch is in the ON position. The Camera must
be within range of the Wi-Fi
the password of the router is available for entering during the in-app setup
process.
®
router with which you want to connect. Make sure
Status of LED Indication:
- Pair / Setup state: LED is red and blue and slowly flashing
- Unconnected state: LED is red and slowly flashing
- Connected state: LED is blue and always on
- Ready for connection state: LED is blue and slow flashing
Note:
You can only setup via a compatible smartphone or tablet and not via a PC.
ENGLISH
Wi-Fi Internet Viewing 21
5.3 User Account and Camera Setup on Android™
Devices
What you need
• MBP854CONNECT camera
• The power adapter for the Camera
• Device with Android™ system version 4.2 or above
5.3.1 Power ON and Connect the Camera
• Connect the power adapter to an electrical outlet and insert the plug into the
micro USB socket on the back of the Camera.
• Make sure that the ON/OFF switch is in the ON position.
• The Camera’s Red LED flashes after the Camera has finished booting. When
you hear two ‘beeps’ this means the Camera is ready to setup.
5.3.2 Download the Hubble App
• Go to the Google Play™ Store to search “Hubble for Motorola Monitors”.
• Download the Hubble for Motorola Monitors App from the Google Play™
Store and install it into your Android™ device.
22 Wi-Fi Internet Viewing
5.3.3 Run the Hubble App on Android™ device
A1
• Ensure your Android™ device is connected to your Wi-Fi® router.
• Run the Hubble App and key in your Hubble App account information, read
through the Terms of Service then select “I agree to the Terms of Use” before
you tap on
Note: If you have a Hubble App account, please select Already have a Account?
to go to the next step.
Create
. (Picture A1)
ENGLISH
Android™
Wi-Fi Internet Viewing 23
5.3.4 Add Camera to your account
A2 A3
A4
• Create a new account and Login.
• Tap on Add Camera. (Picture A2)
• Tap on Continue. (Picture A3)
• The setup instructions will appear on the following screen. (Picture A4)
24 Wi-Fi Internet Viewing
• Press and hold the PAIR button for 3 seconds at the side of the Camera, you
A5 A6
will then hear a beep tone and a voice saying "Ready for pairing" from the
Camera Unit. Tap on Search for Camera.
• The App will automatically search for and connect to your Camera as shown
in the pictures below (A5 & A6) and the blue/red color LED on the Camera
will flash.
ENGLISH
Android™
Wi-Fi Internet Viewing 25
• Select your Wi-Fi® Network and tap Continue, enter your password then tap
A7 A8
A9 A10
on Connect. (Picture A7, A8)
• It will take a few minutes for the Camera to connect to the Wi-Fi
®
network
before showing the connection status (Picture A9, A10). If connection fails,
please tap on the Retry button and repeat the steps starting from 5.3.4.
26 Wi-Fi Internet Viewing
• Tap on Watch Live Camera to view the Camera video, the Camera's Blue
A11 A12
LED will flash. (Picture A11)
• Tap on the Hubble logo and go back to the Camera list. (Picture A12)
ENGLISH
Android™
Wi-Fi Internet Viewing 27
5.4 User Account and Camera Setup:
®
Working with iPhone
What you need
• MBP854CONNECT camera
• The power adapter for the Camera
• iPhone
5.4.1 Power ON and Connect the Camera
• Connect the power adapter to an electrical outlet and insert the plug into the
• Make sure that the ON/OFF switch is in the ON position.
• The Camera's red LED flashes after the Camera has finished booting. When
5.4.2 Download the Hubble App
• Go to the App Store to search for “Hubble for Motorola Monitors”.
• Download the Hubble for Motorola Monitors App and install it on your
®
/ iPad® with iOS 7.0 version or up
micro USB socket at the back of the Camera.
you hear two beeps, this means the Camera is ready for setup.
®
/iPad®.
iPhone
/iPad
®
28 Wi-Fi Internet Viewing
5.4.3 Run the Hubble App on your iPhone®/iPad
i1
®
• Ensure your iPhone®/iPad® is connected to your Wi-Fi® Router.
• Run the Hubble App and key in your account information, read through the
Terms of Service then select “I agree to the Terms of Service” before you tap
on Create. (Picture i1)
Note: If you have a Hubble App account, please select Already have a Account?
to go to the next step.
ENGLISH
iOS
Wi-Fi Internet Viewing 29
5.4.4 Add the Camera to your account
i2 i3
FOCUS85 /
SCOUT66 /
MBP854
Blink83 / Scout83 /
MBP36HD
i4
• Create a new account and Login.
• Tap on Add Camera. (Picture i2)
• Tap on “MBP854CONNECT”. (Picture i3)
• Follow the instruction on screen to turn on the Bluetooth™ function of your
iPhone/iPad.
30 Wi-Fi Internet Viewing
• Tap on the Home button, then enter the “Settings” menu to turn on the
i5 i6
i7
Bluetooth™ function of your iPhone/iPad.
• Press the HOME key to exit the Settings menu and tap on the “Hubble
Home” App to enter the start up screen.
ENGLISH
iOS
Wi-Fi Internet Viewing 31
• Tap on Continue and follow the instructions below. (Pictures i4-i7)
i4 i5
32 Wi-Fi Internet Viewing
• Follow the steps above to locate the Camera with identification number
i8
i9 i10
“CameraHD-xxxxxxxxxx”, then tap on Continue, ensure your iPhone
®
iPad
connected it. (Picture i8)
®
• Select your Wi-Fi
Network and tap Continue, enter your password and
®
then tap Next. (Pictures i9, i10)
or
ENGLISH
iOS
Wi-Fi Internet Viewing 33
• It will take a few minutes for the Camera to connect to the Wi-Fi® network
i11 i12
i13 i14
before showing the connection status (Pictures i11, i12). If connection fails,
please tap on the Retry button and repeat Step 5.4.4 as instructed above.
• Tap on Watch Live Camera to view the Camera video. (Picture i13)
• Tap on Hubble logo to go back to Camera list. (Picture i14)
34 Wi-Fi Internet Viewing
5.5 Camera Functions:
A13 A14
Working with devices for Android™
5.5.1 Connecting the Camera to Power
• Insert the small end of the Power Adapter into the Power Adapter Connector
and plug the Power Adapter into a suitable electrical outlet.
• Slide the ON/OFF switch to ON, the blue Power LED will light up. (Note: To
switch the device off, slide the ON/OFF switch to OFF.)
• Run the Hubble App on your Android™ device.
• The Camera view appears on the screen.
5.5.2 Add more cameras
• On Camera view, tap on the Hubble logo to go back to the Add Camera
page. (Picture A13)
• Tap on
• Once the Camera has been added, the Camera view will be automatically
Add Camera
device setup Section 5.3.4. (Picture A14)
displayed.
to add more Cameras by following the steps for Android™
ENGLISH
Android™
Wi-Fi Internet Viewing 35
5.5.3 Remove a Camera
A15 A16
You can remove a Camera from your account by following these steps:
• Tap the Settings icon on the General page, then tap on Camera Detail.
(Picture A15)
• Select Remove Camera and tap on Ye s to delete the unit from camera list.
(Picture A16)
36 Wi-Fi Internet Viewing
5.5.4 Change your Account Information
A17
You can change the account information using your Android™ device.
• Tap Account on the General page, the Account Settings appears on screen.
(Picture A17)
• Tap on Change Password to change your password following the instructions.
• Tap on Log Out to leave the account.
• Tap on Fre emi um plan, it will go to the link of Cloud Video Recording
Service, to obtain more information, please visit our website
http://www.hubbleconnected.com.
• Tap on Use Remote Only to access Remote Connection Setting , confirm
Use Remote Only by Selecting Yes .
• Enable Disconnect Alert , when disconnect it will be "beeps" alert,enable
the disconnect Alert by selecting Ye s .
• Tap on Send Log to send your Hubble Android App report to our server via
e-mail; this should be sent if requested by a customer service agent.
ENGLISH
Android™
Wi-Fi Internet Viewing 37
5.5.5 Camera settings
A18 A19
A20
You can change the Camera settings by tapping the Settings icon on the
Camera list screen/page. (Picture A18)
• Tap on Camera Details to review Camera Name, Change Image, Firmware
version, Model ID and Remove Camera. (Picture A19)
• Tap on Notification Sensitivity to set the sensitivity of sound & motion
detection, and to set an Alert of High/Low temperature. (Picture A20)
38 Wi-Fi Internet Viewing
5.5.6 General Settings
A21 A22
• Tap Settings on the General page.
• Tap on General Settings to shift the format of the Clock (12hr/24hr) & the
Te m p e r a tu re (°C / °F) and activate Notification Sound or Vibr ation . (Picture
A21)
• Tap on Do Not Disturb, set the timer to the desired time and select ON, the
Camera will not send any sound or alert to your Android™ device for the
duration of your setting. (Picture A22)
ENGLISH
Android™
Wi-Fi Internet Viewing 39
5.5.7 Features of the Hubble App
A23 A24
Tap on the viewing area and the function icons will appear as shown below.
Two Way Communication – Tap on to activate the function. Press the
round button once to speak through the Camera. Toggle the button again to
listen to the audio feedback from the Camera. (Pictures A23, A24)
40 Wi-Fi Internet Viewing
Pan and Tilt Function:
A25 A26
Tap the up and down buttons to tilt, the left and right buttons to pan. (Pictures
A25, A26)
ENGLISH
Android™
Wi-Fi Internet Viewing 41
Photo/Video - Take a photo or record a video from your Camera.
A27 A28
A29
Tap the Video icon to activate the Video function and press the red button to
start and release to stop recording. (Pictures A27, A28)
Tap the Camera icon to switch to Camera mode, you can capture photos
from the Camera view. (Picture A29)
42 Wi-Fi Internet Viewing
Note:
A30 A31
Photos and videos will be stored on the internal flash memory of your Android™
device, they can be accessed from the Gallery or Media Player. To play videos,
please use the Hubble App or a 3rd party application, such as MX player (found
in the Google Play™ Store), which is able to play MJPG (Motionjpeg) files.
Melody – To play one of the pre-set 5 melodies, tap on Melody to show the
Melody m enu a nd se lect the one y ou pr efe r to p lay o n yo ur Ca mera . (P ictu re A3 0)
Temperature Measure – The temperature reading from the temperature
sensor at the back of the Camera will display on your Android™ device screen
(Picture A31). The reading will turn RED if the temperature goes beyond the
High/Low Temperature as set in your Account. (see section 4.2.4)
ENGLISH
Android™
Wi-Fi Internet Viewing 43
5.6 Camera Functions:
i15 i16
®
Working with devices for iPhone
• Run the Hubble App on your iPhone
• The Camera view appears on the screen.
5.6.1 Add more cameras
• In Camera view, tap on the Motorola logo to go to the Add Camera page.
(Picture i15)
• Tap on Add Camera to add another Camera (follow steps for iPhone
setup Section 5.4.4.) (Picture i16)
• Once the Camera has been added, the Camera view will be automatically
displayed.
®
/iPad®.
/iPad
®
®
/iPad®
44 Wi-Fi Internet Viewing
5.6.2 Remove a Camera
i17 i18
You can remove a Camera from your Account by following these steps:
• Tap the Settings icon on the General page, then tap on Camera Detail.
(Picture i17)
• Select Remove Camera and tap on Ye s to delete the unit from camera list.
(Picture i18)
ENGLISH
iOS
Wi-Fi Internet Viewing 45
5.6.3 Change your Account Information
i19
You can change the account information using your iPhone®/iPad®.
• Tap Account on the General page and the Account settings will appear on
screen. (Picture i19)
• Tap on Change Password to change your password by following the
instructions.
• Tap on Log Out to leave the account.
• Tap on Current plan, it will go to the link of Cloud Video Recording Service,
to obtain more information, please visit our website
https://hubbleconnected.com/plans/.
• Tap on Send app log to send your Hubble App report to our server via e-mail;
this should be sent if requested by a customer service agent.
46 Wi-Fi Internet Viewing
5.6.4 Camera settings
i20 i21
i22
You can change the Camera settings to tap the Settings icon on the General
page (Picture i20). You can review the Camera Name and Firmware version
(Picture i21) and are allowed to change the Camera name by tapping on the
existing name and following the instructions.
ENGLISH
iOS
• Tap on Notification Sensitivity to set the sensitivity of sound & motion
detection, and to set an Alert of High/Low temperature. (Picture i22)
Wi-Fi Internet Viewing 47
5.6.5 General settings
i23 i24
i25
• Tap on Settings on the General page. (Picture i23)
Tap o n
•
General Settings
Te m p er a t u r e
(°C / °F) and activate
to change the format for
Notification Sound
Clock
(12hr/24hr) &
or
Vibr ation
. (Picture i24)
• Tap on Do Not Disturb, set the timer to the desired time and select ON, the
Camera will not send any sound or alert to your iPhone
®
/iPad® for the
duration of your setting. (Picture i25)
48 Wi-Fi Internet Viewing
5.6.6 Hubble App Settings
i26
• Tap on Settings on your iPhone®/iPad®, and the applications will appear, tap
on the Hubble App and the settings will be shown on screen. (Picture i26)
ENGLISH
iOS
Wi-Fi Internet Viewing 49
5.6.7 Features of the Hubble App
i27 i28
On Camera view, tap the viewing area and Function Icons will appear as follows.
Two Way Communication – Tap on to activate the function. Press the
round button once to speak through the Camera. Toggle the button again to
listen to the audio feedback from the Camera. (Pictures i27, i28)
50 Wi-Fi Internet Viewing
Pan and Tilt Function:
i29 i30
Tap the up and down buttons to tilt, the left and right buttons to pan. (Pictures
i29, i30)
ENGLISH
iOS
Wi-Fi Internet Viewing 51
Take P ic tu re - Tap on Camera icon to capture photos from the Camera
i31
view. (Picture i31)
Note:
Photos will be stored on the internal flash memory of your iPhone
52 Wi-Fi Internet Viewing
®
/iPad®.
Melody – To play one of the pre-set 5 melodies, tap on Melody to show the
i32 i33
Melody menu and select the one you prefer to play on your Camera. (Picture i32)
Temperature Display – The temperature reading from the temperature
sensor at the back of the Camera will display on your iPhone
®
/iPad® screen
(Picture i33). The readings will turn RED if the temperature goes beyond the
High/Low Temperature as set in your Account. (see section 5.6.5)
ENGLISH
iOS
Wi-Fi Internet Viewing 53
5.7 Camera Functions: Working with PC/Notebook
• Go to https://app.hubbleconnected.com/#login
• Enter your User Name and Password and then click Login if you have already
created an account.
• Click on the Camera list paired in your account via Android™ device or
• On the website, you can change the Settings by following the Menu instructions.
®
iPhone
/iPad®, and the Camera view will appear on screen. You can easily
stay connected with your favorite people, places and pets with live video
streaming.
54 Wi-Fi Internet Viewing
6. Disposal of The Device (environment)
At the end of the product lifecycle, you should not dispose of
this product with normal household waste. Take this product to
a collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user's guide and/or
box indicates this.
Some of the product materials can be reused if you take them to
a recycling point. By reusing some parts or raw materials from used products
you make an important contribution to the protection of the environment.
Please contact your local authorities in case you need more information on the
collection points in your area.
Dispose of the battery pack in an environmentally-friendly manner according to
your local regulations.
ENGLISH
Disposal of The Device (environment) 55
7. Cleaning
Clean the Baby Monitor with a slightly damp cloth or with an anti-static cloth.
Never use cleaning agents or abrasive solvents.
Cleaning and care
• Do not clean any part of the product with thinners or other solvents and
chemicals –- this may cause permanent damage to the product which is not
covered by the warranty.
• Keep the Baby Monitor away from hot, humid areas or strong sunlight, and
don't let it get wet.
• Every effort has been made to ensure high standards of reliability for your
Baby Monitor. However, if something does go wrong, please do not try to
repair it yourself –- contact Customer Service for assistance.
56 Cleaning
8. Help
Display
No display
• Try recharging or replacing the battery pack.
• Reset the units. Disconnect the battery pack of the Parent Unit and unplug
both the units' electrical power, then plug them back in.
• Is the unit turned on?
Press and hold the ON/OFF button
• Is the correct camera selected?
Change the camera number, if necessary.
• Is the video display turned on?
Press the VIDEO ON/OFF button
• When operating using batteries only, the Display will go blank after
5 minutes or 30 minutes or 60 minutes to save power (depending on video
settings). The unit is still active and will give you audio alerts. You can
reactivate the screen by pressing any button.
0 on the Parent Unit to turn it ON.
V to turn it on.
Registration
If the Baby Unit has lost its link with the Parent Unit
• Try recharging or replacing the battery pack.
• If the Baby Unit is too far away it may be going out of range, so move the
Baby Unit closer to the Parent Unit.
• Reset the units by disconnecting them from the battery and electrical power.
Wait about 15 seconds before reconnecting. Allow up to one minute for the
Baby Unit and the Parent Unit to synchronize.
• See 2.3 Registration (Pairing), if there is a need to re-register the units.
ENGLISH
Help 57
Interference
Noise interference on your Parent Unit
• Your Baby and Parent Units may be too close. Move them farther apart.
• Make sure there is at least 3 to 6ft (1 to 2m) between the 2 units to avoid audio
feedback.
• lf the Baby Unit is too far away it may be out of range, so move the Baby Unit
closer to the Parent Unit.
• Make sure the Baby and Parent Units ar e not near other electrical equipment,
such as a television, computer or cordless/mobile telephone.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi
Bluetooth
®
systems, or microwave ovens, may cause interference with this
product, so keep the Baby Monitor away at least 5ft (1.5m) from these types
of products, or turn them off if they appear to be causing interference.
• If the signal is weak, try moving the Parent and/or Baby Unit to different
positions in the rooms.
Noise interference on your device
To avoid background noise or echoes, ensure that there is enough distance
between your device and the Wi-Fi
Use of other 2.4 GHz products, such as Bluetooth
®
Camera Unit.
®
systems or microwave
ovens, may cause interference with this product. Keep the Wi-Fi
at least 3ft away from these types of products, or turn them off if they appear to
be causing interference.
Lost connection
Check your Wi-Fi
®
Wi-Fi
Camera Unit is switched ON. Wait a few minutes to make the connection
with the Wi-Fi
®
settings. If necessary reconnect your Wi-Fi®. Ensure the
®
system.
®
routers),
®
Camera Unit
58 Help
If you forgot your password
If you do not remember your password, tap Forgot password and submit
your e-mail address. A new password will be sent to your e-mail address
immediately.
Troubleshooting for Wi-Fi
Category Problem
®
Internet Viewing
Solution
Description / Error
Account I am unable to login
even after registration.
Account I receive an error
message saying: "Email
ID is not registered".
Please check your user name and
password.
Please ensure that you have
registered with us. Tap Create
Account to create an account to be
able to use the Wi-Fi
®
Home Video
Baby Monitor Camera.
Account What do I do if I forgot
my password?
Click on the "Forgot Password" link on
the https://
app.hubbleconnected.com/
#lostpassword website OR your
Android™ or iOS application. An email
will be sent to your registered email
address.
Account I am unable to receive a
new password although
I have used the "Forgot
password" option.
1. The e-mail might have been sent
to your Junk Mail Folder. Please
check your Junk Mail Folder.
2. There might be a delay in getting
your e-mail. Please wait a few
minutes and refresh your email
account.
ENGLISH
Help 59
Connectivity
Issues
I get a message: We
are having problems
accessing your
camera. This could be
due to lack of internet
connection. Please
wait and try again later.
Viewing
Camera
When I am in "remote
mode", the video stops
after 5 minutes. How
do I view for longer?
Features The sound alert setting
threshold is not right.
Setting Up While I am adding a
new Camera to my
account, I am not able
to find any Cameras to
add.
1. Please try again in a few minutes.
This could be because of any
issue with your internet
connection.
2. If the problem remains, please
restart your Camera to check if
this fixes the problem.
3. Please restart your Wireless
Rout er.
When you are accessing your Camera
via a network different from your
home network (over the internet) your
video times out after 5 minutes.
You can click on the Camera again
from the Android™/iOS application
to start streaming again.
If you are accessing from your webbrowser, then you can press on the
Reload button to start viewing your
Camera video stream again.
You can adjust the Sound Sensitivity
to trigger notifications under the
Camera Settings menu.
If you are trying to add a Camera
which has previously been added into
your account or another account, you
will first have to reset the Camera. This
can be done by pressing and holding
the PAIR button at the bottom of the
Camera for 5 seconds.
60 Help
General What are the
®®®
®
supported browsers for
accessing from my PC/
®
Mac
?
General What is the
significance of LED
flashing?
Connectivity
Issues
I am not able to access
my Camera.
We recommend using Google
Chrome™ 24 or above. However the
following browsers are also
supported: Internet Explorer
above (for PC), Safari
(for Mac) or Firefox
®
®
6.0 or above
®
18.0 or above
9.0 or
(both PC or Mac).
A flashing LED indicates the following
status:
Slow flashing: 1. Your Camera is in
setup mode. You can add the Camera
to your account in this mode. Out of the
box, the Camera is in setup mode. To
reset to setup mode, press and hold the
PAIR button on the bottom of the
Camera until you hear a beep.
Slow flashing: 2. The Camera is either
connecting to the router or lost the link
to the router. Please ensure that the
Camera is in the Wi-Fi signal range.
LED is stable:
The Camera is
connected to the Wi-Fi network.
Please check if the Camera is within
Wi-Fi range. If the LED on your
Camera is slow blinking, please try to
move the Camera closer to the router
for better Wi-Fi range and try again.
ENGLISH
Help 61
Setting Up During setup on device
®®®®®®®®®
for Android™ and iOS,
I am not able to find my
Camera during the last
step and the setup fails.
Connectivity
Issues
Even though I am
accessing my Camera
from the same Wi-Fi
network, I still find my
Camera is shown as
remote. I can only
access it for 5 minutes
at a time.
Camera When I try to view the
Camera, I get a prompt
for Camera firmware
upgrade. What should I
do?
General Which platforms are
supported for
accessing my Camera?
Please reset the Camera to setup
mode and try again. Press and hold
the PAIR button on the bottom of the
Camera until you hear a beep. Wait
for a minute for the Camera to restart.
When the Camera LED is blinking,
this indicates that it is in setup mode.
Now restart the setup from your
smartphone again.
Please check your wireless router
settings. For example, for Buffalo
brand routers there is an option called
Wireless Isolation. Please disable this
option.
Please upgrade your firmware. This
takes around 5 minutes. We push
upgrades from time to time to
improve the Camera features.
Minimum requirement:
Windows 7*
*Java browser plug-in needed
Mac OS version 10.7
Chrome™ version 24
Internet Explorer version 9
Safari version 6
Java™ version 7
Firefox version 18.0
Adobe Flash Player 15.0
Android™ 4.2
iPhone /iPad iOS version 7.0
62 Help
General I do not hear any sound
®
when I am accessing a
remote Camera.
General What is the meaning of
"Local Camera" and
"Remote Camera"?
General How do I download the
App for Android™ and
iOS devices?
You can tap on the speaker icon in the
video stream screen to hear audio. By
default the audio is not ON when you
are accessing a remote Camera.
When you are accessing your Camera
from the same wireless network (Home)
in which it is configured, it is a Local
Camera. When you are accessing your
Camera away from your home it is a
Remote Camera. You may be using 3G,
4G or 4G LTE or a Wi-Fi connection
outside of your home.
Android™:
- Open the Google Play Store on
your Android™ device
- Select Search
- Type in "Hubble for Motorola
Monitors"
- The results will show the Hubble
App
- Select to install it
iOS Device:
- Open the App Store
SM
- Select Search
- Type in "Hubble for Motorola
Monitors"
- The results will show the Hubble
App
- Select to install it
ENGLISH
Help 63
Setting up When the video is cut
off, the application
attempts to reconnect
and and results in lost
sound and choppy
video.
Features How many users can
access the Camera at
one time?
Connectivity
issues
I found interference
caused by my other
web cam devices.
You will need to turn off the auto lock
function of your smart device to
ensure continuous video/audio
feeding.
If you are accessing in Local Mode,
two users are supported, after two
users all streaming will go through the
remote server. This allows for
unlimited user access to a single
Camera at one time.
Video streaming performance is
related to internet bandwidth,
especially if you have 2 or more video
streaming devices that are working
through the same router.
64 Help
9. General Information
lf your product is not working properly....
1. Read this User's Guide or the Quick Start Guide.
2. Contact Customer Service:
US and Canada 1-888-331-3383
Email: support@motorolamonitors.com
To order a replacement battery pack, contact customer service.
Consumer Products and Accessories Limited Warranty
("Warranty")
Thank you for purchasing this Motorola branded product manufactured under
license by Binatone Electronics International LTD ("BINATONE").
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this
Motorola branded product ("Product") or certified accessory ("Accessory") sold
for use with this product that it manufactured to be free from defects in materials
and workmanship under normal consumer usage for the period outlined below.
This Warranty is your exclusive warranty and is not transferable.
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not
transferable.
What will BINATONE do?
BINATONE or its authorized distributor at its option and within a commercially
reasonable time, will at no charge repair or replace any Products or Accessories
that does not conform to this Warranty. We may use functionally equivalent
reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
ENGLISH
General Information 65
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR
BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitation on the length of an implied warranty, so
the above limitations or exclusions may not apply to you. This Warranty gives
you specific legal rights, and you may also have other rights that vary from one
jurisdiction to another.
66 General Information
Products Covered Length of Coverage
Consumer Products One (1) year from the date of the
products original purchase by the first
consumer purchaser of the product.
Consumer Accessories Ninety (90) days from the date of the
accessories original purchase by the first
consumer purchaser of the product.
Consumer Products and Accessories
that are Repaired or Replaced
The balance of the original warranty or
for Ninety (90) days from the date
returned to the consumer, whichever is
longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts
due to normal wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their
rated capacity and batteries that leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation,
storage, misuse or abuse, accident or neglect, such as physical damage (cracks,
scratches, etc.) to the surface of the product resulting from misuse; (b) contact
with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the
like, extreme heat, or food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or Accessory to abnormal
usage or conditions; or (d) other acts which are not the fault of MOTOROLA or
BINATONE, are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage
that result from the use of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded from coverage.
ENGLISH
General Information 67
Unauthorized Service or Modification. Defects or damages resulting from
service, testing, adjustment, installation, maintenance, alteration, or
modification in any way by someone other than MOTOROLA, BINATONE or its
authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags
that have been removed, altered or obliterated; (b) broken seals or that show
evidence of tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or parts, are excl uded from
coverage.
Communication Services. Defects, damages, or the failure of Products or
Accessories due to any communication service or signal you may subscribe to
or use with the Products or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
US and Canada 1-888-331-3383
Email: support@motorolamonitors.com
You will receive instructions on how to ship the Products or Accessories at your
expense and risk, to a BINATONE authorized Repair Center.
To obtain service, you must include: (a) the Product or Accessory; (b) the
original proof of purchase (receipt) which includes the date, place and seller of
the Product; (c) if a warranty card was included in your box, a completed
warranty card showing the serial number of the Product; (d) a written
description of the problem; and, most importantly; (e) your address and
telephone number.
These terms and conditions constitute the complete warranty agreement
between you and BINATONE regarding the Products or Accessories purchased
by you, and supersede any prior agreement or representations, including
representations made in any literature publications or promotional materials
issued by BINATONE or representations made by any agent, employee or staff
of BINATONE, that may have been made in connection with the said purchase.
68 General Information
FCC and IC regulations
FCC Part l5
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Privacy of communications
may not be ensured when using this device.
To ensure safety of users, the FCC has established criteria for the amount of radio
frequency energy that can be safely absorbed by a user or bystander according to
the intended usage of the product. This product has been tested and found to
comply with the FCC criteria.
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3(B)/NMB-3(B)
ENGLISH
General Information 69
WARNING
Changes or modifications, to this equipment not expressively approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
Industry Canada
This device complies with Industry Canada licence-exempt RSS standard(s):
Operation is subject to the following Two conditions:(1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
The term "IC: " before the certification/registration number only signifies that
the Industry Canada technical specifications were met. This product meets the
applicable Industry Canada technical specifications.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
70 General Information
Technical Specifications
Baby Unit
Frequency 2.4 GHz to 2.48 GHz
Image sensor color CMOS 1M Pixels
Lens f 2.5mm, F 2.8
IR LED 8 pcs
Power Adapter Ten Pao International Ltd.
S009GU0500150
Input: 100-240V AC, 50/60Hz, 300mA;
Output: 5.0V DC, 1500mA
WARNING
Use only with supplied power supply.
ENGLISH
General Information 71
Parent Unit
Frequency 2.4 GHz to 2.48 GHz
Display 4.3" diagonal TFT LCD
Display colors 16.7M color LCD
Brightness control 8 steps
Volume control 8 steps
Power Adapter Ten Pao International Ltd.
S009GU0500150
Input: 100-240V AC, 50/60Hz, 300mA;
Output: 5.0V DC, 1500mA
WARNING
Use only with provided power supply.
Battery Motorola BF6X
3.7V, 1880mAh Lithium-Ion Polymer, rechargeable
battery pack
WARNING
Do not use non-rechargeable batteries for the Parent
Unit. Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to
the instructions.
72 General Information
Manufactured, distributed or sold by Binatone Electronics International LTD.,
official licensee for this product. MOTOROLA and the Stylized M logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC.
and are used under license. Apple logo and Safari are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is a
trademark of the Wi-Fi Alliance. Internet Explorer and Windows are trademarks of
the Microsoft group of compa nies. Firefox is a registered trademark of the Mozi lla
Foundation. Adobe and Flash are either registered trademarks or trademarks of
Adobe Systems Incorporated. Java is a registered trademark of Oracle and/or its
affiliates. All other trademarks are the property of their respective owners.
© 2014 Motorola Mobility LLC. All rights reserved.
EN_US Version 6.0
Printed in China
Loading...