S p e c i f i c a t i o n s
DESCRIPTION
•Metal construction with various finishes identified by suffix
•1/2" IPS connections
•Includes metal pop-up waste assembly
OPERATION
•Lever style handles
•Maximum handle(s) rotation angle is 90˚ to full on
•Rotate hot side counterclockwise to open (clockwise to close)
•Rotate cold side clockwise to open (counterclockwise to close)
FLOW
•Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
•1224 cartridge design
•Nonmetallic and stainless steel material
STANDARDS
•Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, ICC A117.1, and all applicable requirements referenced therein
•Certified to ANSI/NSF 61/9
•Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
•ADA for lever handle
WARRANTY
•Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
•5 year warranty if used in commercial installations
BRANTFORD™
4" Lavatory Faucet with Metal Waste Assembly
Models: 6610 series
Bulk Model: 66610
(Bulk packed 6 per carton) 50/50 Waste Assembly
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 3 HOLES, 1" MIN. DIA.
|
|
5-1/4" |
3" |
4" |
(134mm) |
(76mm) |
(102mm) |
|
|
|
5" |
|
|
(127mm) |
3-7/8" |
|
|
(98mm) |
|
|
|
|
3-1/4" |
|
|
(83mm) |
3/4"
(20mm)
max.
2-1/2" (64 mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
Rev. 7/08 |
www.moen.com |
|