MITSMI MM6572S, MM6565D, MM6565F, MM6565S, MM6572D Datasheet

MITSUMI	High Precision Operational Amplifier MM6558

High Precision Operational Amplifier

Monolithic IC MM6558 Series

Outline

This IC is a high precision operational amplifier, which is pin compatible with general use operational amplifier 4558, and has greatly improved input offset voltage and drift voltage. The offset is much smaller than for a general use operational amplifier, so offset adjustment is not needed. This contributes to reduction in the number of processes. Also, drift relative to stress is greatly reduced, so there is much less effect of stress due to IC strain and the like.

Features

1.	Low input offset voltage	±power supply	0.1mV typ.	(MM6558, MM6559, MM6560, MM6561,
				MM6572)
		single power supply	0.2mV typ.	(MM6564, MM6565)
2.	Low input offset drift	±power supply	±1µV/°C typ.	(MM6558, MM6559, MM6560, MM6561,
				MM6572)
		single power supply	±2µV/°C typ.	(MM6564, MM6565)
3.	Current consumption	±power supply	3.0mA typ.	(MM6558, MM6559)
			3.5mA typ.	(MM6560, MM6572)
			1.7mA typ.	(MM6561)
		single power supply	0.35mA typ.	(MM6564)
			0.35mA typ.	(MM6565)
4.	Through rate	±power supply	3V/µS	(MM6558, MM6559, MM6560, MM6561)
			6V/µS	(MM6572)
		single power supply	1V/µS	(MM6564, MM6565)
5.	Input conversion	±power supply	1.2µVrms	(MM6558, MM6559, MM6560, MM6561)
	interference voltage		0.5µVrms	(MM6572)
		single power supply	1.8µVrms	(MM6564)
			2.0µVrms	(MM6565)

Package

1. SOP-8C, SOP-8E (MM65			F)
2.	DIP-8B (MM65	D)
3.	SIP-8A (MM65	S)

Applications

1.Office automation equipment

2.measurement equipment

3.sensor equipment

MITSUMI	High Precision Operational Amplifier MM6558

MM6558

Absolute Maximum Ratings (Ta=25°C)

Item	Symbol	Rating	Units
Storage temperature	TSTG	-40~+125	°C
Operating temperature	TOPR	-20~+75	°C
Power supply voltage	V+/V-	±12	V
Allowable power dissipation	Pd	300	mW
Differential input voltage	VID	±20	V
Input voltage	VI	±10	V

Electrical Characteristics (Unless otherwise specified Ta=25°C, V+/V-=±10V)

Item	Symbol	Measurement Conditions		Min.	Typ.	Max.	Units
Operating power supply voltage range				±3.5		±11	V
Input offset voltage	VIO	<	10kΩ		0.1	0.5	mV
		RS =
Input offset voltage temperature drift	VIO				±1		µV/°C
Input offset current	IIO				5	200	nA
Input bias current	IB				50	500	nA
Input resistance	RIN			0.3	3		MΩ
In-phase input voltage	VCM			±8	±9		V
Voltage gain	AV	>		86	100		dB
		RL = 2kΩ , VO=±7V
Maximum output voltage	VO	>	10kΩ	±8	±9		V
		RL =
In-phase signal elimination ratio	CMRR	<	10kΩ	70	90		dB
		RS =
Power supply voltage elimination ratio	PSRR	<	10kΩ	76.5	90		dB
		RS =
Current consumption	ICC				3.0	5.0	mA
Output flow current	ISO			13			mA
Output inflow current	ISI			13			mA
Through rate	SR	>	2kΩ		3		V/µS
		RL =
Gain band area	GBW				7		MHz
Input conversion interference voltage	en	RS=300Ω , IHFA (A curve)			1.2		µVrms

MITSUMI	High Precision Operational Amplifier MM6558

MM6559

Absolute Maximum Ratings (Ta=25°C)

Item	Symbol	Rating	Units
Storage temperature	TSTG	-40~+125	°C
Operating temperature	TOPR	-20~+75	°C
Power supply voltage	V+/V-	±12	V
Allowable power dissipation	Pd	300	mW
Differential input voltage	VID	±20	V
Input voltage	VI	±10	V

Electrical Characteristics (Unless otherwise specified Ta=25°C, V+/V-=±10V)

Item	Symbol	Measurement Conditions		Min.	Typ.	Max. Units
Operating power supply voltage range				±2		±11	V
Input offset voltage	VIO	<	10kΩ		0.1	0.5	mV
		RS =
Input offset voltage temperature drift	VIO				±1		µV/°C
Input offset current	IIO				5	200	nA
Input bias current	IB				50	500	nA
Input resistance	RIN			0.3	3		MΩ
In-phase input voltage	VCM			±8	±9		V
Voltage gain	AV	>		86	100		dB
		RL = 2kΩ , VO=±7V
Maximum output voltage	VO	>	10kΩ	±8	±9		V
		RL =
In-phase signal elimination ratio	CMRR	<	10kΩ	70	90		dB
		RS =
Power supply voltage elimination ratio	PSRR	<	10kΩ	76.5	90		dB
		RS =
Current consumption	ICC				3.0	5.0	mA
Output flow current	ISO			13			mA
Output inflow current	ISI			13			mA
Through rate	SR	>	2kΩ		3		V/µS
		RL =
Gain band area	GBW				7		MHz
Input conversion interference voltage	en	RS=300Ω , IHFA (Acurve)			1.2		µVrms

MITSUMI	High Precision Operational Amplifier MM6558

MM6560

Absolute Maximum Ratings (Ta=25°C)

Item	Symbol	Rating	Units
Storage temperature	TSTG	-40~+125	°C
Operating temperature	TOPR	-20~+75	°C
Power supply voltage	V+/V-	±12	V
Allowable power dissipation	Pd	300	mW
Differential input voltage	VID	±20	V
Input voltage	VI	±10	V

Electrical Characteristics (Unless otherwise specified Ta=25°C, V+/V-=±10V)

Item	Symbol	Measurement Conditions		Min.	Typ.	Max. Units
Operating power supply voltage range				±3.5		±11	V
Input offset voltage	VIO	<	10kΩ		0.1	0.5	mV
		RS =
Input offset voltage temperature drift	VIO				±1		µV/°C
Input offset current	IIO				5	200	nA
Input bias current	IB				50	500	nA
Input resistance	RIN			0.3	3		MΩ
In-phase input voltage	VCM			±8	±9		V
Voltage gain	AV	>		86	100		dB
		RL = 2kΩ , VO=±7V
Maximum output voltage	VO	>	2kΩ	±8	±9		V
		RL =
In-phase signal elimination ratio	CMRR	<	10kΩ	70	90		dB
		RS =
Power supply voltage elimination ratio	PSRR	<	10kΩ	76.5	90		dB
		RS =
Current consumption	ICC				3.5	5.7	mA
Output flow current	ISO			25			mA
Output inflow current	ISI			25			mA
Through rate	SR	>	2kΩ		3		V/µS
		RL =
Gain band area	GBW				7		MHz
Input conversion interference voltage	en	RS=300Ω , IHFA (A curve)			1.2		µVrms

MITSUMI	High Precision Operational Amplifier MM6558

MM6561

Absolute Maximum Ratings (Ta=25°C)

Item	Symbol	Rating	Units
Storage temperature	TSTG	-40~+125	°C
Operating temperature	TOPR	-20~+75	°C
Power supply voltage	V+/V-	±12	V
Allowable power dissipation	Pd	300	mW
Differential input voltage	VID	±20	V
Input voltage	VI	±10	V

Electrical Characteristics (Unless otherwise specified Ta=25°C, V+/V-=±10V)

Item	Symbol	Measurement Conditions		Min.	Typ.	Max. Units
Operating power supply voltage range				±3.5		±11	V
Input offset voltage	VIO	<	10kΩ		0.1	0.5	mV
		RS =
Input offset voltage temperature drift	VIO				±1		µV/°C
Input offset current	IIO				5	200	nA
Input bias current	IB				50	500	nA
Input resistance	RIN			0.3	3		MΩ
In-phase input voltage	VCM			±8	±9		V
Voltage gain	AV	>		86	100		dB
		RL = 5kΩ , VO=±7V
Maximum output voltage	VO	>	10kΩ	±8	±9		V
		RL =
In-phase signal elimination ratio	CMRR	<	10kΩ	70	90		dB
		RS =
Power supply voltage elimination ratio	PSRR	<	10kΩ	76.5	90		dB
		RS =
Current consumption	ICC				1.7	2.7	mA
Output flow current	ISO			6			mA
Output inflow current	ISI			6			mA
Through rate	SR	>	2kΩ		3		V/µS
		RL =
Gain band area	GBW				7		MHz
Input conversion interference voltage	en	RS=300Ω , IHFA (A curve)			1.2		µVrms