MiTAC 7170 Service Manual & Troubleshooting Manual For

7170

TESTING TECHNOLOGY DEPARTMENT / TSSC

BY

：：：：

Richard Wang

JUL. 2001

SERVICE MANUAL & TROUBLESHOOTING GUIDE FOR

1

7170

N/B MAINTENANCE

1.

Hardware Engineering Specification

----------------------------------------------------------------

----------------

1.1 Introduction------------------------------------------------------------------------------------------------------------------------------

1.2 Hardware System-----------------------------------------------------------------------------------------------------------------------

1.3 System Power Management------------- ---- --- --- --- --- --- --- --- --- -- ---- --- --- --- --- --- --- --- --- -- ---- --- ------ --- --- --- --- -- ------

1.4 Firmware - System BIOS & Keyboard BIOS-------------------------------------------------------------------------------------

1.5 Periperal Component------------------------------------------------------------------------------------------------------------------

2. System Assembly & Disassembly

----------------------------------------------------------------

---------------------

2.1 System View ------------------------------------------------------------------------------------------------------------------------------

2.2 System Disassembly --------------------------------------------------------------------------------------------------------------------

3. Definition & Location Connectors / Swit ches Setting

-----------------------------------------------------------

3.1 7170 Main Board ------------------------------------------------------------------------------------------------------------------------

3.2 7170 DC Power Board -----------------------------------------------------------------------------------------------------------------

3

3.3 7170 ESB Board -------------------------------------------------------------------------------------------------------------------------

3.4 7170 Touch Pad Board -----------------------------------------------------------------------------------------------------------------

4.

Definition & Location Of Major Components

----------------------------------------------------------------

-----

4.1 7170 Main Board ------------------------------------------------------------------------------------------------------------------------

5.

Pin Descriptions Of Major Components

----------------------------------------------------------------

-----------

5

5.1 Pentium III/Celeron µPGA2 CPU --------------------------------------------------------------------------------------------------

5

5.2 VIA VT8603 Twister North Bridge Controller ----------------------------------------------------------------------------------

5.3 VIA VT8231 Sorth Bridge Controller ---------------------------------------------------------------------------------------------

CONTENTS

3

3 4 34 37 39

43

43 46

65

65 68 69 69

70

72

72 78 88

2

7170

N/B MAINTENANCE

6.

System Block Diagram

----------------------------------------------------------------

---------------------------------

7. Maintenance Diagnostic

----------------------------------------------------------------

-------------------------------

7.1 Introduction -----------------------------------------------------------------------------------------------------------------------------

7

7.2 Error Codes -----------------------------------------------------------------------------------------------------------------------------

7.3 Diagnostic Tools ------------------------------------------------------------------------------------------------------------------------

7

7.4 Circuit ------------------------------------------------------------------------------------------------------------------------------------

8. Trouble Shooting

----------------------------------------------------------------

----------------------------------------

8

8.1 No Power ---------------------------------------------------------------------------------------------------------------------------------

8

8.2 No Display -------------------------------------------------------------------------------------------------------------------------------

8.3 VGA Controller Failure --------------------------------------------------------------------------------------------------------------

8.4 Memory Test Error --------------------------------------------------------------------------------------------------------------------

8.5 Keyboard ( K/B ) , Touch-Pad ( T/P ) , ESB Test Error -----------------------------------------------------------------------

8.6 CD-ROM Drive Test Error ----------------------------------------------------------------------------------------------------------

8

8.7 Hard Drive Test Error ----------------------------------------------------------------------------------------------------------------

8.8 USB Port Test Error ------------------------------------------------------------------------------------------------------------------

8.9 PIO Port Test Error -------------------------------------------------------------------------------------------------------------------

8.10 Audio Failure --------------------------------------------------------------------------------------------------------------------------

9. Spare Parts List

----------------------------------------------------------------

------------------------------------------

10. System Explode View

----------------------------------------------------------------

---------------------------------

11. Circuit Diagram

----------------------------------------------------------------

----------------------------------------

12. Reference

----------------------------------------------------------------

------------------------------------------------

CONTENTS

100

101

101 102

108 108

109

110 118 121 123

125 127 129 131 133 135

137

146 147

175

3

7170

N/B MAINTENANCE

1. Hardware Engineering Specification

1.1. Introduction

1.1.1. General Description

This document describes the system hardware engineering specification for 7170 portable notebook computer system.

The 7170NB is a excellently high performance and highly portable platform.

1.1.2. System Overview

The Architecture of 7170NB is based on PCI - ISA structure. It provides a high performance platform on PCI bus up to 33MHz and is fully compatible with IBM PC/A T specification which have standard hardware peripheral interface an

d

supports AGP 4X(133MHz). 7170NB adopts Intel Celeron 128K integrated level 2 cache i n a FC-PGA package which have an excellent ability of code execution for multimedia applications operating at 700/733/766 and 800MHz & Intel Pentium

!

CPU , 256K integrated level 2 cache in a FC-PGA package which have an excellent ability of code execution for multimedia applications operating at 800/866/933/1G and 1.33GHz

The power management complies with Advanced Configuration and Power Interface (ACPI) 1.0. It also provides eas

y

configuration through CMOS ROM setup which is built in system BIOS software and can be pop-up b y pressing F2 a

t

system start up or warm reset. System also provides LEDs to display system status, such a s HDD, FDD, CD-ROM, NUM LOCK, CAP LOCK, SCROLL LOCK, AC Power indicator and battery present, capacity & charging, email/Blue-tooth status 7170NB system is equipped with one 2.5”, hard disk drive(supports Ultra DMA33/66), one 5 1/4" 24x CD-ROM drive(DVD optional), one USB floppy, one 56k

b

ps Fax/Modem, one 10/100 Mb LAN, one PCMCIA sockets, internal keyboard, Touch pad with scroll-up/down buttons, two stereo speakers, TFT LCD panel, o ne FIR, PIO/TV-OUT, one VGA connector for CRT and one PS/2 port for external keyboard or mouse. System also provides in-system flash ROM

p

rogramming for easy future upgrade.

A full set of software drivers and utilities are available to allow advanced operating system such as Windows 98 , Windows 98SE ,Window NT ,Window2000, Windows ME and Windows XP to take full advantages of the hardware capabilities. Features such as bus mastering IDE, Windows 98-ready Plug & Pla y, Advanced Power Management (APM) with application restart, software-controlled power shutdown.

Following chapters will describe more detail for each individual sub-systems and functions.

4

7170

N/B MAINTENANCE

ON/OFF

POWER

FIR

PS2

MODEM "394 PRINTER TV-OUT

LAN

USB

2/"

MIC L-IN

L-OUT VOLUME LID

SPKRSPKR

CPU

FAN

PCMCIA

HDD

T-PAD

T-PAD BOARD

CDROM

BATTERY

MDC

EMAIL/

Blue-

Tooth

D/D BOARD

Q-KEY BOARD

SODIMMx2

MINI-PCI

Mini

CRT

Int. MIC

LEDs

ACIN

1.2. Hardw are System

1.2.1 S ystem block

5

7170

N/B MAINTENANCE

1.2.2 System parts



CPU : Intel Celeron (700/733/766/800MHz) with FC-PGA package OR

Intel Pentiu m Ⅲ (800EB/866/933/1000/1133MHz) with FC-PGA package Space reserve for VIA C yrix III



CORE LOGIC :

VIA VT8603 (North Bridge : 66/100/133 SOCKET 370 CPU

Integrated S3 Savage4 AGP4X Graphics Core with LVDS Interface

Memory Controller Supporting PC100/PC133 SDRAM VIA VT8231(South Bridge) : PC99 Compliant PCI to ISA Bridge

Integrated S u p e r-IO (LPT , COM ) Integrate Fast Ethernet AC97 Audio, USB, RTC UltraDMA-33/66 Master Mode PCI-EIDE Controller for HDD, DROM/DVD ACPI , E P M, SM Bus, Te mperatu re Monito r



PCMCIA Controller : TI PC4410(PCMCIA) + TPS2211(Power Switch)



1394 Controller : TI PC4410(MAC) + TSB41AB1(PH Y )



FIR Controller : NS 97338VJG



Embedded Controller : Hitachi H8/3437S



Audio System : Codec RealTek ALC200 (or Crystal CS4299) PQFP + Amp. TI TPA0202



FIR Module : HP HSDL-3600#007 IR module

6

7170

N/B MAINTENANCE



Thermal Sensor : AD1021 (or Genesys Logic GL528SM)



Memory System : Two 144 pin SO-DIMM (PC100/PC133 64/128/256MB)



Flash Memory (BIOS) : 28F020(2M bit)



56.6K FAX/MODEM RJ11 : 30 pin MDC board



LAN RJ45 : VT8231(MAC) + LSI80227(PHY)

 Mini PCI : Wireless LAN/ Modem



Other Function : Reserve Blue Tooth function

7

7170

N/B MAINTENANCE

1.2.3 CPU

Intel Celeron Processor for the FC-PGA370 socket

 Available at 800/ 766/ 733/ 700/ 733/ 700/ 667/ 633/ 600/ 566 /533 /533/ 500/ 466/ 433/ 400/ 366/ 333 / 300 MHz core frequencies with 128KB level-two cache (on die). (300/ 266 MHz core frequencies without level-two cache).

 Intel’s latest Celeron processors in the FC_PGA package are manufactured using the advanced 0.18 micron technology.

 Binary compatible with applications running on previous members of the Intel microprocessor line.  Dynamic execution microarchitecture.  Operates on a 66MHz, transaction-oriented system bus.  Specifically designed for uni-processor based Value PC systems, with the capabilities of MMX

technology.  Power Management capabilities.  Optimized for 32-bit applications running on advanced 32-bit operating systems.



Integrated high performance 32KB instruction and data, nonblocking, level-one cache : separate 16KB

instruction and 16KB data caches.

 Integrated thermal diode.

8

7170

N/B MAINTENANCE

Pentium

!!!!

Processor for the FC-PGA370 socket



Available in 1.133G/ 1.0G/ 933/ 866/ 800EB/ 733/ 667,600EB/ 533EB MHz for 133 MHz system

bus.

 Available in 850/ 800/ 750/ 700/ 650/ 600E/ 550E and 550E MHz for 100 MHz system bus.

 System bus frequency at 100 MHz and 133 MHz(“E” denotes support for Advanced Transfer Cache and Advanced system buffering ;”B” denotes support for a 133MHz System bus where both bus frequencies are available for order per each given core

 Available in versions that incorporate 256KB Advanced Transfer Cache(on-die, full speed Level 2(L2) cache with Error Correcting Code(ECC))

 Dual Independent Bus (DIB) architecture: Separate dedicate d ex te rn al S y ste m Bus and dedica ted in te rn a l hig h - spe e d C a ch e b u s.

 Internet Streaming SIMD Extensions for enhanced video ,sound and 3D performance

 Binary compatible with applications running on previous members of the Intel microprocessor line.

 Dynamic execution micro architecture.

 Intel Processor Serial Number.

 Power Manage ment capabilities

 System Management mode  Multiple low-po w e r state s.

 Optimized for 32-bit applications running on advanced 32-bit operating system.

9

7170

N/B MAINTENANCE

 Flip Chip pin Grid Array (FC-PGA) packaging technology ;FC-PGA processors deliver high performance with improved handling protection and socketability.

 Integrated high performance 16KB instruction and 16KB data, nonblocking, level one cache.

 256 KB Integrated Full Speed level two cache allows for low latency on read/store operations.

 Double Quad Word Wide (256bit) cache data bus provides extremely high throughput on read/store operations.

 8-way cache associativity provides improved cache hit rate on reads/store operations.  Error-correcting code for Systen Bus data.

 Enables systems which are scaleable for up to two processor.

10

7170

N/B MAINTENANCE

1.2.4 Core Logic Controller :

1.2.4.1 VIA Twister VT8603 (with Mobile VGA Savage4)



CPU Interface



Socket 370 support for Intel Pentium III, Pentium II, and Celeron processors



66/100/133 MHz CPU FrontSide Bus (FSB)



Built-in Phase Lock Loop circuitry for optimal skew control within and between clocking regions



Five outstanding transactions (four In-Order Queue (IOQ) plus one output latch)



Dynamic deferred transaction support



Advanced High-Performance DRAM Controller



DRAM interface runs synchronous (66/66, 100/100, 133/133) mode or pseudo-synchronous (66/100, 100/66,

100/133,133/100) mode with FSB



Concurrent CPU, AGP, and PCI access



Supports SDRAM and VCM SDRAM memory types



Support 3 DIMMs or 6 banks for up to 1.5 GB of DRAM (256Mb DRAM technology)



64-bit data width



Supports maximum 8-bank interleave (8 pages open simultaneously); banks are allocated based on LRU



SDRAM X-1-1-1-1-1-1-1 back-to-back accesses

11

7170

N/B MAINTENANCE



Integrated Savage4 2D/3D/Video Accelerator

– Optimized Shared Memory Architecture (SMA) – 8 to 32 MB frame buffer using system memory – Floating point triangle setup engine – Single cycle 128-bit 3D architecture – 8M triangles/second setup engine – 140M pixels/second trilinear fill rate – Full internal AGP 4x performance – S3 DX7 texture compression (S3TCÔ) – Next generation, 128-bit 2D graphics engine – High quality DVD video playback – Flat panel monitor support

– 2D/3D resolutions up to 1920x1440 

3D Rendering Features

– Single-pass multiple textures – Anisotropic filtering – 8-bit stencil buffer – 32-bit true color rendering – Specular lighting and diffuse shading – Alpha blending modes

12

7170

N/B MAINTENANCE

– Massive 2K x 2K textures – MPEG-2 video textures – Vertex and table fog – 16 or 24-bit Z-buffering – Sprite anti-aliasing, reflection mapping, texture morphing, shadows, procedural textures and atmospheric effects



2D Hardware Acceleration Features

– ROP3 Ternary Raster Operation BitBLTs – 8, 16, and 32 bpp mode acceleration



Motion Video Architecture

– High quality up/down scaler – Planar to packed format conversion – Motion compensation for full speed DVD playback – Hardware subpicture blending and highlights – Multiple video windows for video conferencing – Contrast, hue, saturation, brightness and gamma controls – Digital port for NTSC/PAL TV encoders

13

7170

N/B MAINTENANCE



Extensive LCD Support

– 36-bit DSTN/TFT flat panel interface with 256 gray shade support – Integrated 2-channel 110 MHz LVDS interface – Support for all resolutions up to 1280x1024 – ZV-Port Interface – Panel power sequencing – Hardware Suspend/Standby control



Flat Panel Monitor Support

– 12-bit TFT flat panel interface to TMDS encoders – Digital Visual Interface (DVI) 1.0 compliant



Concurrent PCI Bus Controller

– PCI 2.2 compliant, 32-bit 3.3V PCI interface with 5V tolerant inputs – Supports up to 5 PCI masters – PCI to system memory data streaming support – Delay transaction from PCI master accessing DRAM – Symmetric arbitration between Host/PCI bus for optimized system performance

14

7170

N/B MAINTENANCE



Advanced System Power Management Support

– Dynamic power down of SDRAM (CKE) – Independent clock stop controls for CPU / SDRAM, AGP, and PCI bus – PCI and AGP bus clock run and clock generator control – VTT suspend power plane preserves memory data – Suspend-to-DRAM and self-refresh power down – Low-leakage I/O pads

– ACPI 1.0 and PCI Bus Power Management 1.1 compliant 

Full Software Support

– Drivers for major operating systems and APIs: [Windows 9x, Windows NT 4.0, Windows 2000, Direct3D, DirectDraw and DirectShow, OpenGL ICD for Windows 9x, NT, and 2000]

– North Bridge/Chipset and Video BIOS support 

Additional Features

– 250 MHz RAMDAC with Gamma Correction – 12-bit interface to external TV encoder – I 2 C Serial Bus and DDC Monitor Communications – 2.5V Core and Mixed 3.3V/5V Tolerant and GTL+ I/O



35 x 35mm PBGA package with 552 balls

15

7170

N/B MAINTENANCE

1.2.4.2 South Bridge VIA VT8231



Inter-operable with VIA and other Host-to-PCI Bridges

– Combine with VT82C694X for a complete 66 / 100 / 133 MHz Socket370 AGP 4x system (Apollo Pro133A)

– Combine with VT8601 for a complete 66 / 100 / 133 MHz Socket370 system with integrated 2D/3D graphics (Apollo ProMedia)

– Inter-operable with Intel or other Host-to-PCI bridges for a complete PC99 compliant PCI/AGP system 

Integrated Peripheral Controllers

– Integrated Fast Ethernet Controller with 1 / 10 / 100 Mbit capability – Integrated USB Controller with two root hub and four function ports – Dual channel UltraDMA-33 / 66 master mode EIDE controller – AC-link interface for AC-97 audio codec and modem codec – HSP modem support – Integrated SoundBlasterPro / DirectSound compatible digital audio controller 

Integrated Legacy Functions

– Integrated Keyboard Controller with PS2 mouse support – Integrated DS12885-style Real Time Clock with extended 256 byte CMOS RAM and Day/Month Alarm

for ACPI – Integrated Bus Controller including DMA, timer, and interrupt controller – Serial IRQ for docking and non-docking applications

16

7170

N/B MAINTENANCE

– Flash EPROM, 32Mbit (4Mbyte) EPROM and combined BIOS support – Fast reset and Gate A20 operation 

Fast Ethernet Controller

– High performance PCI master interface with scatter / gather and bursting capability – Standard MII interface to Ethernet or HomePNA PHYceiver – 1 / 10 / 100 MHz full and half duplex operation – Transmit data buffer byte alignment for low CPU utilization – Separate 2K byte FIFOs for receive and transmit of full Ethernet packets – Flexible dynamically loadable EEPROM algorithm – Physical, Broadcast, and Multicast address filtering using hashing function – Flexible wakeup events: link status change, magic packet, unicast physical address match, predefined pattern

match – Software controllable power down 

UltraDMA-33 / 66 / 100 Master Mode PCI EIDE Controller

– Dual channel master mode PCI supporting four Enhanced IDE devices – Transfer rate up to 100MB/sec to cover up to PIO mode 4, multi-word DMA mode 2, and UltraDMA mode 5 – Thirty-two levels (doublewords) of prefetch and write buffers per channel – Dual DMA engine for concurrent dual channel operation – Bus master programming interface for SFF-8038i rev.1.0 and Windows-95 / 98 / 2000 compliant – Full scatter gather capability

17

7170

N/B MAINTENANCE

– Support ATAPI compliant devices including DVD devices – Support PCI native and ATA compatibility modes – Complete software driver support 

Integrated Super IO Controller

– Supports IR port, parallel port, and floppy disk controller functions – Serial Port Programmable character lengths (5,6,7,8)

Even, odd, stick or no parity bit generation and detection Programmable baud rate generator Independent transmit/receiver FIFOs Modem Control Plug and play with 96 base IO address and 12 IRQ options

– Fast IR (FIR) port IrDA 1.0 SIR and IrDA 1.1 FIR compliant IR function through the second serial port Infrared-IrDA (HPSIR) and ASK (Amplitude Shift Keyed) IR

– Multi-mode parallel port Standard mode, ECP and EPP support Dynamic and static switch between parallel port pinout and FDC pinout Plug and play with 192 base IO address, 12 IRQ and 4 DMA options

– Floppy Disk Controller 16 bytes of FIFO Data rates up to 1Mbps Perpendicular recording driver support Two FDDs with drive swap support Plug and play with 48 base IO address, 12 IRQ and 4 DMA options

18

7170

N/B MAINTENANCE



SoundBlaster Pro Hardware and Direct Sound Ready AC97 Digital Audio Controller

– Dual full-duplex Direct Sound channels between system memory and AC97 link – PCI master interface with scatter / gather and bursting capability – 32 byte FIFO of each direct sound channel – Host based sample rate converter and mixer – Standard v1.0 or v2.0 AC97 Codec interface for single or cascaded AC97 Codec’s from multiple vendors – Loopback capability for re-directing mixed audio streams into USB and 1394 speakers – Hardware SoundBlaster Pro for Windows DOS box and real-mode DOS legacy compatibility – Plug and play with 4 IRQ, 4 DMA, and 4 I/O space options for SoundBlaster Pro and MIDI hardware – Hardware assisted FM synthesis for legacy compatibility – Direct two game ports and one MIDI port interface – Complete software driver support for Windows-95/98/2000 and Windows-NT 

MC97 HSP Modem Controller

– PCI bus master interface with scatter / gather and burst capability – Standard AC97 codec interface for MC or AMC codec – Wake on ring in APM or ACPI mode through AC97 link – Supported by most HSP modem vendors

19

7170

N/B MAINTENANCE



Universal Serial Bus Controller

– USB v.1.1 and Intel Universal HCI v.1.1 compatible – Eighteen level (doublewords) data FIFO with full scatter and gather capability – Root hub and four function ports – Integrated physical layer transceivers with optional over-current detection status on USB inputs – Legacy keyboard and PS/2 mouse support



System Management Bus Interface

– One master / slave SMBus and one slave-only SMBus – Host interface for processor communications – Slave interface for external SMBus masters



Voltage, Temperature, Fan Speed Monitor and Controller

– Five universal input channels for voltage or temperature sensing – Two fan-speed monitoring channels – Input channel for thermal diode in Intel™ high speed Pentium II™ / Pentium III™ CPUs – Programmable control, status, monitor and alarm for flexible desktop management – External thermister or internal bandgap temperature sensing – Automatic clock throttling with integrated temperature sensing – Internal core VCC voltage sensing – Flexible external voltage sensing arrangement (any positive supply and battery)

20

7170

N/B MAINTENANCE



Sophisticated PC99-Compatible Mobile Power Management

– Supports both ACPI (Advanced Configuration and Power Interface) and legacy (APM) power management – ACPI v1.0 Compliant – APM v1.2 Compliant – CPU clock throttling and clock stop control for complete ACPI C0 to C3 state support – PCI bus clock run, Power Management Enable (PME) control, and PCI/CPU clock generator stop control – Supports multiple system suspend types: power-on suspends with flexible CPU/PCI bus reset options,

suspend to DRAM, and suspend to disk (soft-off), all with hardware automatic wake-up – Multiple suspend power plane controls and suspend status indicators – One idle timer, one peripheral timer and one general purpose timer, plus 24/32-bit ACPI compliant timer – Normal, doze, sleep, suspend and conserve modes – Global and local device power control – System event monitoring with two event classes – Primary and secondary interrupt differentiation for individual channels – Dedicated input pins for power and sleep buttons, external modem ring indicator, and notebook lid open/close

for system wake-up – Multiple internal and external SMI sources for flexible power management models – One programmable chip select and one microcontroller chip select – Enhanced integrated real time clock (RTC) with date alarm, month alarm, and century field – Thermal alarm on either external or any combination of three internal temperature sensing circuits

21

7170

N/B MAINTENANCE

– Hot docking support – I/O pad leakage control 

Plug and Play Controller

– PCI interrupts steerable to any interrupt channel – Steerable interrupts for integrated peripheral controllers: USB, floppy, serial, parallel, audio, soundblaster, MIDI – Steerable DMA channels for integrated parallel, and soundblaster pro controllers – One additional steerable interrupt channel for on-board plug and play devices – Microsoft Windows 2000 TM , Windows ME TM ,Windows 98SE TM , Windows 98 TM , Windows NT TM ,

Windows 95 TM and plug and play BIOS compliant



Built-in NAND-tree pin scan test capability



0.30um, 3.3V, low power CMOS process



Single chip 27x27 mm, 376 pin BGA

22

7170

N/B MAINTENANCE

1.2.5 PCMCIA/1394 Link Controller: PCI4410



The PCI4410 supports the following features:

- A 209-ball MicroStar Ball Grid Array (GHK) package

- 3.3-V core logic with universal PCI interfaces compatible with 3.3-V and 5-V PCI signaling environments

- Mix-and-match 5-V/3.3-V 16-bit PC Cards and 3.3-V CardBus Cards

- Single PC Card or CardBus slot with hot insertion and removal

- Burst transfers to maximize data throughput on the PCI bus and the CardBus bus

- Parallel PCI interrupts, parallel ISA IRQ and parallel PCI interrupts, serial ISA IRQ with parallel PCI interrupts, and serial ISA IRQ and PCI interrupts

- Serial EEPROM interface for loading subsystem ID and subsystem vendor ID

- Pipelined architecture allows greater than 130M bps sustained throughput from CardBus-to-PCI and fromPCI-to-CardBus

- Interface to parallel single-slot PC Card power interface switches like the TI TPS2211

- Up to five general-purpose I/Os

- Five PCI memory windows and two I/O windows available to the 16-bit PC Card socket

- Two I/O windows and two memory windows available to the CardBus socket

- Exchangeable Card Architecture (ExCA) compatible registers are mapped in memory and I/O space

- Intel 82365SL-DF and 82365SL register compatible

- Distributed DMA (DDMA) and PC/PCI DMA

- 6-Bit DMA on the PC Card socket

23

7170

N/B MAINTENANCE

- PCI Bus Lock (LOCK)

-Advanced Submicron, Low-Power CMOS Technology

-Internal Ring Oscillator

1.2.6 LAN PHY: LSI80227



features:

- Single Chip 100Base-TX / FX/10Base-T Physical Layer Solution

- 3.3V Version of SEEQ 80221

- Dual Speed -10/100 Mbps

- Half And Full Duplex

- MII Interface To Ethernet Controller

- MI Interface For Configuration & Status

- Optional Repeater Interface

- AutoNegotiation: 10/100, Full/Half Duplex

- Meets All Applicable IEEE 802.3 Standards

- On Chip Wave Shaping -No External Filters Required

- Adaptive Equalizer

- Baseline Wander Correction

- Interface to External 100Base-T4 PHY

- LED Outputs: Link/ Activity/ Collision / Full Duplex/ 10/10 0/ User Programmable

24

7170

N/B MAINTENANCE

- Many User Features And Options

- Few External Components

- 3.3V Supply with 5V Tolerant I/O

- 64L T QFP

1.2.7 Embedded Controller : Hitachi H8/3437S



CPU

- Two-way general register configuration

Eight 16-bit registers or Sixteen 8-bit registers

- High-speed operation Maximum clock rate : 16Mhz at 5V



Memory

- Include 32KB ROM and 1KB RAM



16-bit free-run n ing timer

- One 16-bit free-running counter

- Two output-compare lines

- Four input capture lines



8-bit timer ( 2 c h a n n els )

- Each chann e l ha s o ne 8 -b it u p-c o u nte r , two time constant re gisters



PWM tim er (2 ch an n els)

- Resolution :1/250

- Duty cycle can be set from 0 to 100%

25

7170

N/B MAINTENANCE



I2C bus interface ( one channel )

- Include single master mode and slave mode



Host interface ( HIF)

- 8-bit host interface port

- Three host interrupt requests ( HIRQ1,11,12)

- Regular and fast A20 gate output



Keyboard controller

- Controls a matrix-scan keyboard by providing a keyboard scan function with wake-up interrupts

- And sense ports



A/D converter

- 10-bit resolution

- 8 channels : single or scan mode (selectable )



D/A converter

- 8-bit resolution

- 2 channels



Interrupts

- Nine external interrupt lines : NMI# , IRQ0 to 7#

- 26 on-chip interrupt sources



Power-down modes

- Sleep mode

- Software standby mode

- Hardware standby mode

26

7170

N/B MAINTENANCE



A single chip microcomputer



On-chip flash memory



Maximum 64-kbyte address space



Support three PS/2 port for external keyboard ,mouse and internal track pad.



Support SMI,SCI trigger input:



Cover switch



Battery charging control



Smart Battery monitoring



Control D/D system on/off



Fan control and LED indicator serial interface



100pin TQFP

27

7170

N/B MAINTENANCE

1.2.8.1 AC97 CODEC : ALC200 (or CS4299) -PQF P



AC ’97 2.1 Compatible  Industry Leading Mixed Signal Technology  20-bit Stereo Digital-to-Analog Converter and 18-bit Ste-reo Analog to Digital Converter with Sample

Rate Conversion

 Four Analog Line-level Stereo Inputs for Connection from LINE IN, CD, VIDEO, and AUX



Two Analog Line-level Mono Inputs for Modem Sub-system and Internal PC Beeper

 Mono Microphone Input Switchable from Two External Sources



High Quality Differential CD Input  Dual Stereo Line-level Outputs  Extensive Power Management Support



Meets or Exceeds Microsoft’s ® PC 98 and PC 99 Audio Performance Requirements

 3D Stereo Enhancement



Sample Rate Converters

1.2.8 Audio System

28

7170

N/B MAINTENANCE



combined with driver software and an AC’97 CODEC provides a complete high quality

audio solution,

Feature Include:

- MPU-401 interface

- FM synthesizer

- Game Port (disable in 7170 NB system)

- MIDI port. (disable in 7170 NB system)

- MODEM

- CD-ROM

- User-Defined GPIO

- Volume Control: Rotary VR

- Stereo BTL 2x1 W Amplifiers(TPA0202) With 8 Ohm Load.

- 16 Bit Stereo ADC & DAC For Record And Play Back

- Programmable Sample Rates From 4kHz To 44.1kHz For Record And Playback

- Microphone in * 1 (3.5 mm phone-jack)

- Headphone out * 1: stereo (3.5mm phone-jack) (disable in 7170 NB system)

- Built-in Speaker * 2 (1w, 8 ohm)

- Built-in Microphone * 1

29

7170

N/B MAINTENANCE

1.2.9 IR Module : HSDL-3600#007



Fully Compliant to IrDA 1.1 Specifications

- 115.2 kb/s to 4 Mb/s operation

- excellent nose-to-nose operation



Compatible with ASK, HP-SIR



IEC825-Class 1 Eye Safe



Wide Operating Voltage Range

- 2.7 V to 5.25 V



Small Module Size

- 4.0 x 12.2 x 5.1 mm (HxWxD)



Complete Shutdown

- TXD, RXD, PIN diode



Low Shutdown Current

- 10 nA typical



Adjustable Optical Power Management

- Adjustable LED drive-current to maintain link integrity



Single Rx Data Output

- FIR Select pin switch to FIR



Integrated EMI Shield

- Excellent noise immunity

 Edge Detection Input

- Prevents the LED from long turn-on time



Interface to various Super I/O and Controller Devices



Designed to Accommodate Light Loss with Cosmetic Window

MiTAC 7170 Service Manual & Troubleshooting Manual For

Specifications and Main Features

Frequently Asked Questions

User Manual