Milton CAT E550A User Manual

E550

WINDROW ELEVATOR

A

SIMPLE. PROVEN. POWERFUL.

Weight 15,100 lbs Conveyor Slat Depth 7"

Engine Cat Tier 3 C4.4 - 114 hp Foot Shaft Idler Diameter 24"

Height 116" Push Frame Stand Off Increments 4"

Length 208" Discharge Height 75"

Length w/Raised Towing Frame 160" Front Wheel Cylinder Lift 8"

Width w/Wings In 102" Front Tire Size 22" x 7"

Width w/Wings Out 124" Rear Tire Size 8.25 x R15

Conveyor Throat Width 60" Fuel Tank Capacity 50 Gal

Conveyor Slat Width 58". Oil Tank Capacity 53.5 Gal

HIGH-SLAT ENTRY TACKLES
TALL WINDROWS

This feature enables the machine to tackle
tall windrows laid by belly dump trucks on
high-production or wide-width jobs.

NEW SLIDING HITCH MAKES
PAVER HOOK-UP EASIER

No tools are required. Simply hook up to
the paver, drive forward until it latches,
then put the keeper pin in.

HIGH TORQUE DIRECT DRIVE
MOTOR ELIMINATES GEARBOX

The direct drive motor not only eliminates
the need for a gearbox, but is kept cool by
flushing the case with a shuttle valve.

MANUAL HYDRAULIC VALVES
KEEP SYSTEM SIMPLE AND
RELIABLE

Two manual valves allow operator to control the
height of each side of the unit independently.

Weiler reserves the right to make changes in engineering, design, and specif ications, and to make improvements at any time without notice or obligation.

EASY-ACCESS CHAIN CONTROL
LEVER SAVES TIME

Operator control of chain speed and direction
saves time when the chain needs to be reversed
or speed needs adjusted.

WEILER E550A WINDROW ELEVATOR SPECIFICATIONS

RELIABLE, DURABLE ENGINE AND
HEAVY-DUTY COMPONENTS
ENSURE LOW-MAINTENANCE
OPERATION

A Cat turbocharged engine with 114 hp at 2,200
rpm delivers high performance and clean, quiet
power. Convenient positioning of service points
ensures easy accessibility.

Weiler is a premier whole product contract manufacturing provider and prototype development resource center.

Phone: [phone]

www.weilerproducts.com

Weiler

815 Newbold Drive

.O. Box 289

P

Knoxville, IA 50138

Fax: [phone]