Page 1
36” Bottom Mount French Door
Refrigerator
KFNF 9955 iDE
Specication Sheet TRS 10312016
8mieleusa.com
Page 2
36” Bottom Mount French Door Refrigerator
KFNF 9955 iDE
SPECIFICATIONS
KFNF 9955 iDE — Item 38995500USA
Overall Unit Width 35
Overall Unit Height 79
Overall Unit Depth 24” (610mm)
Niche
Cabinet Opening Width
Minimum Cabinet Opening Height 80“ (2032mm)
Minimum Cabinet Opening Depth ≥ 24” (610mm)
Plumbing
Water Supply Requirements
Water Connection Line
Electrical
Electrical Requirements - Volts/Amps
Power Cord - Plug and length NEMA 5-15 plug, 7’ 10
Ventilation
Additional cutout Not Required
KFNF 9955 iDE
Features:
• NEW: Miele PerfectCool Series
• French Door
• Plumbed IceMaker
• Soft Close Door
• Gallon Door Bin
• Comfort Clean Door Bin
• Double Freezer Drawers
• PerfectFresh
Custom Panel
Maximum Panel Weight
Maximum Panel Thickness 3/4” (19mm)
Minimum Panel Thickness 5/8” (16mm)
Shipping
Shipping Weight 383.5 lbs (174 kg)
Shipping Dimensions 38
Support
Call Miele 800.843.7231
Miele Website
20/20 Link
13
/16” (910mm)
13
/16” (2027mm)
36” (915mm)
Connect to a cold water supply only. Must
be connected to a shut-off valve. The water
shut-off valve must be accessible after
installation. The water pressure must be
between 22 psi (1.5 bar) and may not exceed
87 psi (6 bar). If the pressure is higher than
87 psi (6 bar), a pressure reducing valve
must be installed.
Use 1/4” OD copper line. This is NOT
supplied with the appliance.
110V / 120V, 60Hz, 15 Amps (single)
110V / 120V , 60Hz, 20Amp (side-by-side)
1
/2” (2.4m)
Top Panels - 26
Middle Panel - 261/2 lbs (12 kg)
Bottom Panel - 261/2 lbs (12 kg)
1
/16” W x 835/8” H x 291/2” D
8www.mieleusa.com
82020technologies.com
1
/2 lbs (12 kg)
• Energy Star
• Sabbath Mode
KFNF 9955 iDE
Page 2 of 7
Specication Sheet TRS 10312016
Page 3
36” Bottom Mount French Door Refrigerator
KFNF 9955 iDE
Unit Dimension
KFNF 9955 iDE
Page 3 of 7
Specication Sheet TRS 10312016
Page 4
36” Bottom Mount French Door Refrigerator
KFNF 9955 iDE
Niche, Water Line, and
Electrical Dimensions
Important Notes:
• Do not install shut-off valve behind the appliance.
• For 24” cabinets, the water line opening must be in the location shown above.
• With Cabinets deeper than 24”, there are no requirements for location of water line.
• The free length of the water supply line must be at least 311/2” (800 mm) when the tube
comes out of the prescribed opening
KFNF 9955 iDE
Page 4 of 7
Specication Sheet TRS 10312016
Page 5
36” Bottom Mount French Door Refrigerator
KFNF 9955 iDE
Panel Details For Inset
Installation
Important Notes:
• Maximum panel thickness is 3/4” (19 mm)
• Minimum panel thickness is 5/8” (16 mm)
• Gap between door panels is 1/4” (6 mm)
KFNF 9955 iDE
Page 5 of 7
Specication Sheet TRS 10312016
Page 6
36” Bottom Mount French Door Refrigerator
KFNF 9955 iDE
Panel Details For
Frameless Installation
Important Notes:
• Maximum panel thickness is 3/4” (19 mm)
• Minimum panel thickness is 5/8” (16 mm)
• Gap between door panels is 1/4” (6 mm)
• Do not use cabinet doors that are wider than specied. Doing so may result in collision and
damage to cabinet doors.
KFNF 9955 iDE
Page 6 of 7
Specication Sheet TRS 10312016
Page 7
36” Bottom Mount French Door Refrigerator
KFNF 9955 iDE
Door Swing Details
Important Notes:
• Please allow for door swing clearance at locations next to a wall
• The illustrated measurement is without mounted front panels. Be sure to add your panel
thickness and handle depth to the measurement in order to avoid interferences.
KFNF 9955 iDE
Page 7 of 7
Specication Sheet TRS 10312016
Loading...