Miele H6267B Installation and Operation Guide
Operating and installation instructions
Oven
To prevent the risk of accidents or damage to the appliance, it is
essential to read these instructions before it is installed and used for the
first time.
M.-Nr. 09 974 780en - AU, NZ
Contents
Warning and Safety instructions .....................................6
Caring for the environment.........................................17
Oven overview ...................................................18
Oven controls....................................................19
On/Off sensor K ..................................................20
Function selector ..................................................20
Oven functions .................................................20
Display ..........................................................20
Symbols in the display ...........................................20
Rotary selector....................................................21
Sensors .........................................................21
Features ........................................................24
Model numbers ...................................................24
Data plate .......................................................24
Items supplied with delivery .........................................24
Standard and optional accessories....................................24
Shelf runners...................................................25
Baking tray, universal tray and rack with non-tip safety notches ...........25
FlexiClip telescopic runners HFC71 .................................26
Fitting and removing the FlexiClip telescopic runners ...................26
Oven controls.....................................................30
Safety features ....................................................30
System lock 0 for the oven........................................30
Cooling fan ....................................................30
Vented oven door ...............................................30
PerfectClean treated surfaces ........................................31
Catalytic enamelled back wall ........................................31
Using for the first time.............................................32
Before using for the first time.........................................32
Setting the time of day for the first time .................................32
Heating up the oven for the first time and rinsing the steam injection system ...33
Settings.........................................................36
Changing the time of day ...........................................36
Changing factory default settings .....................................37
System lock 0 ...................................................40
Activating the system lock ........................................40
Deactivating the system lock for a cooking process ....................41
2
Contents
Deactivating the system lock ......................................41
Minute minder N .................................................42
Using the minute minder N ..........................................42
Setting the minute minder.........................................42
To change the time set for the minute minder .........................43
To cancel the time set for the minute minder ..........................43
Overview of functions .............................................44
Tips on saving energy .............................................46
Operation .......................................................48
Basic operation ...................................................48
Cooling fan.......................................................48
Recommended temperature .........................................49
Changing the temperature ........................................49
Temperature indicator light........................................50
Pre-heating the oven ...............................................50
Switching cooking programmes on and off automatically...................51
Setting a cooking duration ........................................51
Setting a cooking duration and finish time ............................52
At the end of the cooking duration ..................................53
Changing the cooking duration ....................................53
Deleting a cooking duration .......................................54
Deleting a finish time ............................................54
Moisture Plus d .................................................55
Cooking with the Moisture Plus d function .............................56
Set the number of bursts of steam ..................................56
Setting the temperature ..........................................56
Preparing and starting the water intake process .......................57
Automatic burst of steam .........................................58
Injecting bursts of steam manually ..................................58
Evaporating residual moisture ........................................59
The residual moisture evaporation process ...........................59
Starting residual moisture evaporation immediately.....................60
Cancelling residual moisture evaporation ............................61
Automatic programmes............................................62
Notes on using these programmes ....................................63
Cancelling cooking ..............................................63
Using an Automatic programme ......................................64
3
Contents
Baking ..........................................................68
Notes on the baking chart ...........................................69
Baking chart......................................................70
Roasting ........................................................74
Notes on the roasting chart ..........................................74
Roasting chart ....................................................76
Low temperature cooking ..........................................78
Grilling .........................................................80
Notes on the grilling chart ...........................................81
Fan Grilling guide (Fan Grill \)......................................83
Grilling guide (Grill Y).............................................84
Defrost .........................................................85
Bottling .........................................................86
Drying food......................................................87
Frozen food/Ready meals ..........................................88
Gentle Bake .....................................................89
Cleaning and care ................................................90
Useful tips .......................................................91
Normal soiling ....................................................91
Cleaning the seal ...............................................91
Stubborn soiling (does not apply to the FlexiClip telescopic runners) .........92
Stubborn soiling on the FlexiClip telescopic runners ......................93
Cleaning the catalytic enamelled back panel ............................93
Removing soiling caused by spices, sugar and similar deposits ..........93
Removing oil and grease soiling from the catalytic enamelled panel .......94
Removing the door ................................................95
Dismantling the door.............................................96
Fitting the door....................................................99
Removing the shelf runners with FlexiClip telescopic runners ..............100
Removing the back panel ..........................................101
Lowering the top heat/grill element ...................................101
Descaling the steam injection system F ...............................102
Descaling process sequence.....................................102
Preparing the descaling process ..................................103
Starting the descaling process....................................104
Problem solving guide ...........................................107
After sales service and warranty ...................................112
4
Contents
Electrical connection.............................................113
Building-in diagrams .............................................115
Appliance dimensions and unit cut-out ................................115
Front dimensions .................................................117
Installing the oven ...............................................118
Contact details ..................................................119
5
Warning and Safety instructions
This appliance conforms to current safety requirements.
Inappropriate use can, however, lead to personal injury and
damage to property.
To avoid the risk of accidents and damage to the appliance,
please read these instructions carefully before using it for the first
time.
They contain important notes on installation, safety, use and
maintenance.
Miele cannot be held liable for non-compliance with these
instructions.
Keep these instructions in a safe place and ensure that new users
are familiar with the contents. Pass them on to any future owner.
6
Warning and Safety instructions
Correct application
This oven is designed for domestic use and for use in similar
~
environments by guests in hotel or motel rooms, bed & breakfasts
and other typical living quarters. This does not include common/
shared facilities or commercial facilities within hotels, motels or bed
& breakfasts.
The oven is not suitable for outdoor use.
~
The oven is intended only to cook, bake, roast, grill, defrost,
~
bottle, dry fruit etc.
Any other usage is at the owner's risk.
This oven is not intended for use by persons (including children)
~
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they are supervised whilst using
it or have been given instruction concerning its use by a person
responsible for their safety.
They must be able to recognise the dangers of misuse.
7
Warning and Safety instructions
Safety with children
Young children must not be allowed to use this appliance.
~
Older children may only use the appliance when its operation has
~
been clearly explained to them and they are able to use it safely,
recognising the dangers of misuse.
Cleaning work may only be carried out by older children under
~
the supervision of an adult.
Children should be supervised near the appliance. Ensure that
~
they do not play with the appliance.
Children may be able to wrap themselves in packing material or
~
pull it over their heads with the risk of suffocation. Keep children
away from any packing material.
Danger of burning!
~
Children's skin is far more sensitive to high temperatures than that of
adults. Great care should be taken to ensure that children do not
touch the appliance when it is being used. External parts of the oven
such as the door glass, control panel and the vents become quite
hot.
Danger of injury!
~
The maximum load capacity for the door is 15 kg. Children can hurt
themselves on an open door.
Ensure that children do not sit on or swing on the door.
8
Warning and Safety instructions
Technical safety
Repairs and other work by unqualified persons could be
~
dangerous. Installation, maintenance work and repairs to electrical
appliances must only be carried out by a Miele approved service
technician.
A damaged appliance is dangerous. Check it for any visible
~
damage. Never install or attempt to use a damaged appliance.
Reliable and safe operation of this oven can only be assured if it
~
has been connected to the mains electricity supply.
The electrical safety of this appliance can only be guaranteed
~
when continuity is complete between it and an effective earthing
system. It is most important that this basic safety requirement is
present and tested regularly and, where there is any doubt, the
household wiring system should be inspected by a qualified
electrician.
Before connecting the appliance to the mains supply, make sure
~
that the rating on the data plate (voltage and frequency)
corresponds to that of the household supply. This data must
correspond in order to avoid risk of damage to the appliance.
Consult a qualified electrician if in any doubt.
Do not connect the appliance to the mains electricity supply by a
~
multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).
For safety reasons, this appliance may only be used when it has
~
been built in.
This oven must not be installed and operated in mobile
~
installations (e.g. on a ship).
9
Warning and Safety instructions
Tampering with electrical connections or components and
~
mechanical parts is highly dangerous to the user and can cause
operational faults.
Do not open the outer casing of the appliance.
The manufacturer's warranty will be invalidated if the appliance is
~
not repaired by a Miele approved service technician.
Faulty components must only be replaced by genuine Miele
~
spare parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.
If the oven is delivered without a connection cable, or if the
~
connection cable supplied is damaged, a special connection cable
must installed by a Miele approved service technician (see
"Electrical connection").
During installation, maintenance and repair work, the appliance
~
must be disconnected from the mains electricity supply, e.g. if the
oven lighting is faulty (see "Problem solving guide").
It is only completely isolated from the electricity supply when:
– it is switched off at the mains circuit breaker, or
–
it is switched off at the wall socket and the plug is withdrawn from
the socket.
Do not pull the mains connection cable but the mains plug to
disconnect your appliance from the mains electricity supply.
10
Warning and Safety instructions
For the oven to function correctly, it requires a sufficient intake of
~
cool air. Ensure the intake of cool air to the oven is not impaired
(e.g. due to the installation of insulation material inside the housing
unit). Furthermore, the incoming cool air must not be excessively
heated by other heat sources (e.g. fuel furnaces).
If the oven is installed behind a furniture door, do not close the
~
door while the oven is in operation. Heat and moisture would build
up behind a closed furniture door, potentially causing damage to the
oven, the furniture unit and the flooring. Wait until the oven has
cooled down completely before closing the furniture door.
11
Warning and Safety instructions
Correct use
Danger of burning!
,
The oven becomes hot when in use.
Exercise care when handling food and trays so as not to burn
yourself on heating elements, the walls of the oven, shelf runners,
trays and hot food itself.
Use oven gloves when placing food in the oven, turning or
removing it and when adjusting oven shelves etc. in a hot oven.
Do not use the oven to heat up the room.
~
Due to the high temperatures radiated, objects left near the
appliance could catch fire.
Never leave the appliance unattended when cooking with oil or
~
fats as these are a fire hazard if allowed to overheat.
Do not attempt to extinguish oil or fat fires with water.
Switch off the oven and smother the flames by keeping the oven
door closed.
Make sure that you keep to the recommended grilling times when
~
using grilling functions.
Excessively long grilling times can lead to food drying out and
burning or could even cause the food to catch fire.
12
Warning and Safety instructions
Some foods dry out very quickly and can be ignited by high
~
grilling temperatures. Do not use grilling functions for crisping rolls
or bread or to dry flowers or herbs. Instead use Fan Plus U or
Conventional Heat V.
If using alcohol in your recipes, please be aware that high
~
temperatures can cause the alcohol to vaporise and even to ignite
on the hot heating elements.
When residual heat is used to keep food warm, the high level of
~
humidity and condensation can cause corrosion in the oven. The
control panel, worktop or furniture unit may also be damaged.
Do not switch the oven off completely while food is inside it, but
select the lowest possible temperature for the oven function you are
using. This will ensure the fan will automatically continue to run.
Cover any food which is left in the oven to be kept hot, as
~
moisture in the food could lead to corrosion damage in the oven.
This also prevents the food from drying out.
Never cover the floor of the oven with aluminium foil, or place
~
oven dishes, pans, saucepans or trays directly onto the floor of the
oven.
This would cause concentrations of heat which could cause damage
to the floor of the oven.
When storing pots or pans in the oven, do not slide them across
~
the floor of the oven as this will damage the enamel coating.
13
Warning and Safety instructions
Never pour cold water onto hot surfaces in a hot oven.
~
The steam created could cause serious burns or scalding and the
sudden change in temperature can damage the enamel in the oven.
During cooking processes using moisture and during the residual
~
moisture evaporation process steam is produced which can cause
serious injury by scalding.
Do not open the door whilst a burst of steam is being released or
during the evaporation process.
It is important that the heat is allowed to spread evenly
~
throughout the food being cooked. This can be achieved by stirring
and/or turning the food.
Plastic containers, which are not heat-resistant, melt and may
~
ignite at high temperatures and can damage the oven.
Use only plastic containers that are indicated by the manufacturer
as being suitable for use in ovens.
Do not use the appliance to heat up or bottle food in sealed jars
~
and tins.
Pressure will build up inside them and they can explode causing
damage to the appliance, as well as the risk of injury and scalding.
Do not leave the oven door open unnecessarily as someone may
~
trip over it or be injured by it.
The oven door can support a maximum load of 15 kg.
~
Do not lean or sit on an open oven door, or place heavy items on it.
Also make sure that nothing can get trapped between the door and
the oven cavity. This could damage the oven.
14
Warning and Safety instructions
Cleaning and care
Do not use a steam cleaning appliance to clean this oven.
~
Pressurised steam could reach the electrical components and
cause a short circuit.
Scratches on the door glass can result in the glass breaking.
~
Do not use abrasive cleaners, hard sponges, brushes or sharp
metal tools to clean the door glass.
The shelf runners can be removed for cleaning purposes (see
~
"Cleaning and care").
Ensure they are correctly fitted after cleaning and never operate the
oven without the shelf runners fitted.
The catalytic enamelled back panel can be removed for cleaning
~
purposes (see "Cleaning and care").
Ensure it is correctly fitted after cleaning and never operate the
oven without the back panel fitted.
15
Warning and Safety instructions
Accessories
Use only genuine original Miele spare parts. If spare parts or
~
accessories from other manufacturers are used, the warranty will be
invalidated, and Miele cannot accept liability.
If you have a Miele HUB 5000-M/HUB 5001-M/HUB 5000-XL oven
~
dish, do not place it on shelf level 1.
This would damage the floor of the oven. The very small gap
between the bottom of the dish and the oven floor would cause a
build-up of heat and could cause the enamel to crack or chip.
Do not place Miele oven dishes on the top rail of shelf level 1 as they
will not be secured in this position by the anti-tip safety notches on
the sides of the dishes.
Instead, use shelf level 2 for these oven dishes.
16
Caring for the environment
Disposal of the packing
material
The transport and protective packing
has been selected from materials which
are environmentally friendly for disposal
and can normally be recycled.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites.
Rather than just throwing these
materials away, please ensure they are
offered for recycling.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Disposing of your old
appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Therefore, please do not dispose of
your old appliance with your household
waste.
Please dispose of it at your local
community waste collection / recycling
centre.
Ensure that your old appliance presents
no danger to children while being
stored for disposal.
17
Oven overview
a Oven controls*
b Top heat/grill element
c Steam inlet openings
d Water intake pipe for the steam injection system
e Catalytic enamelled back panel
f Air inlet for the fan with ring heating element behind it
g Shelf runners with 5 shelf levels
h Oven floor with bottom heat element underneath it
i Front frame with data plate
j Door
* Depending on model
18
a On/Off sensor K
b Function selector
c Display
d Rotary selector V W
e OK sensor
f # (Back) sensor
g N sensor
h I sensor
Oven controls
i X sensor
j * sensor
k Optical interface (for Miele Service technicians only)
19
Oven controls
On/Off sensor K
The On/Off sensor K is recessed and
reacts to touch.
It is used for switching the oven on and
off.
Function selector
For selecting oven functions.
The function selector can be turned
clockwise or anti-clockwise. When the
function selector is in the ß position, it
can be retracted by pushing it in.
Oven functions
V Conventional Heat
X Bottom Heat
\ Fan Grill
Y Grill
K Gentle Bake
d Moisture Plus
S Rapid Heat-up
U Fan Plus
[ Auto Roast
O Intensive Bake
c Automatic programmes
P Defrost
Display
The display shows the time of day or
your settings.
3?
F
00:00
g lb/oz
°C °F
h min
NX+ 0 * 6}TS
;
Symbols in the display
Depending on the position of the
function selector V and/or whether a
sensor has been touched, the following
symbols appear:
Symbol/Function V
N Minute minder Any
3 Temperature
indicator light
T Duration
S End of cooking
duration
6 Temperature
? Water intake process
F Descale
* Bursts of steam
} Weight Automatic
X Settings P
+ Time of day
0 System lock
You can only set or change a function if
the function selector is in the correct
position.
Oven
function
Moisture
Plus
ß
20
Oven controls
Rotary selector
Use the rotary selector V W to enter
temperatures and durations.
Turning it clockwise will increase the
values, and turning it anti-clockwise will
decrease them.
It can also be used to highlight a
function by moving the triangle V in
the display.
It can be turned clockwise or anticlockwise. It can be retracted in any
position by pressing it in.
Sensors
The OK, #, *, X, I and N sensors
react to touch. Each touch is confirmed
with a keypad tone.
This keypad tone can be switched off
by changing setting P3to Status S0
(see "Settings").
21
Oven controls
Sensor Function Notes
OK For calling up
functions and
saving settings
# To go back a step
X For calling up
functions
Functions marked with the triangle V can be called
up by touching OK. The selected function can be
changed whilst the triangle V is flashing.
Touch OK to save the changes.
If the time of day is visible in the display and the
rotary selector is at the ß position, the symbols for
settings X, time of day +, and system lock 0 will
appear when the X sensor is touched.
If the display is dark, the X sensor will not react until
the oven is switched on.
During a cooking process, temperature 6, cooking
duration T and finish time S can be adjusted by
touching this sensor.
22
Sensor Function Notes
I For switching the
oven interior
lighting on and off
N For setting the
minute minder
* For injecting the
bursts of steam
If the time of day display is visible, the oven interior
lighting can be switched on and off by touching the
I sensor, for example when cleaning the oven.
If the display is dark, the I sensor will not react until
the oven is switched on.
The oven interior lighting switches off after
15 seconds during a cooking process or remains
constantly switched on, depending on the setting
selected.
If the time of day is visible, you can enter a minute
minder duration at any time, e.g. when boiling eggs
on the cooktop.
If the time of day display is switched off, the N
sensor will not react until the oven is switched on.
If manual bursts of steam are selected for the
Moisture Plus d function, the bursts of steam are
injected by touching the * sensor.
The * sensor lights up when a burst of steam can be
injected.
* appears in the display when a burst of steam is
being injected.
Oven controls
23
Features
Model numbers
A list of the ovens described in these
operating instructions can be found on
the back page.
Data plate
The data plate located on the front
frame of the oven is visible when the
door is open.
On the data plate are printed the model
number, serial number and the
connection data (voltage/frequency/
maximum rated load).
Have this information available if you
need to contact Miele so that any
issues can be rectified as quickly as
possible.
Items supplied with delivery
The oven is supplied with:
– the operating and installation
instructions for using the oven
functions,
Standard and optional
accessories
Depending on model!
All ovens are supplied with shelf
runners, a universal tray and
baking and roasting rack (rack for
short).
Depending on the model, Miele
ovens may be supplied with the
accessories listed below.
All accessories and cleaning and care
products in these instructions are
designed to be used with Miele ovens.
They can be ordered at www.mieleshop.com (depending on country) or
from Miele.
Please state the model number of your
oven and that of any accessories you
wish to purchase.
–
Culinario recipe book,
–
screws for fixing the oven to the
housing unit,
–
descaling tablets and a plastic tube
with suction cup for descaling,
–
various accessories.
24
Features
Shelf runners
Shelf runners for accessories (trays,
racks, FlexiClip telescopic runners etc.)
are fitted on either side of the oven
cavity for shelf levels .
The shelf level numbers are indicated
on the front of the oven frame.
Each shelf runner has two rails:
Accessories are inserted between
–
the two shelf runners.
FlexiClip telescopic runners (if
–
available) are fitted to the bottom rail
of each shelf runner.
The shelf runners can be removed for
cleaning purposes (See "Cleaning and
care").
Baking tray, universal tray and rack
with non-tip safety notches
Baking tray HBB71:
Insert these accessories into the shelf
runners between the two rails of a shelf
level.
Non-tip safety notches are located on
accessories to prevent the trays being
pulled out completely when you only
wish to pull them out partially. They also
prevent trays from tipping.
The non-tip safety notches are
–
located in the middle of the short
sides of the baking tray and universal
tray.
The non-tip safety notches are
–
located towards the back of the short
sides of the rack.
Always place the rack with the
loading surface in the lower position
and the non-tip safety notches
towards the back.
Universal tray HUBB71:
Rack HBBR71:
If you are using the universal tray with
the rack on top, insert the tray between
the rails of a shelf runner and the rack
will sit on top of it.
25
Features
FlexiClip telescopic runners HFC71
The FlexiClip telescopic runners can be
attached to any shelf level.
Push the FlexiClip telescopic
runners right into the oven before
placing accessories on them. The
accessories will then automatically
sit securely in between the stoppers
at either end of each runner and be
prevented from sliding off.
Fitting and removing the FlexiClip
telescopic runners
Danger of burning!
,
Make sure the oven heating
elements are switched off and the
oven interior is cool.
The FlexiClip telescopic runners are
fitted in between the two rails that make
up a shelf level.
The telescopic runner with the Miele
logo must be fitted on the right.
When fitting or removing the
telescopic runners, do not extend
them.
The maximum load for the FlexiClip
telescopic runners is 15 kg.
26
^
Hook the FlexiClip telescopic runner
onto the bottom rail of a shelf level at
the front (1.) and push it along the rail
into the oven interior (2.).
Then secure the telescopic runner to
^
the bottom of the two rails as
illustrated (3).
If the telescopic runners are difficult
to pull out after fitting, you may need
to pull firmly on them once to
release them.
To remove a FlexiClip telescopic
runner:
^ Push the FlexiClip telescopic runner
all the way in.
Features
Gourmet perforated baking tray
HBBL 71
The Gourmet perforated baking tray
has been specially developed for the
preparation of baked goods made from
yeast and quark/oil mixtures.
The tiny perforations assist in browning
the underside of baked goods.
The tray can also be used for drying
food.
The surface has been treated with
PerfectClean enamel.
Grilling and roasting insert HGBB71
^
Remove the FlexiClip runner by
raising it at the front (1) then pulling it
forwards along the rail and out (2).
The grilling and roasting insert should
be placed in the universal tray when
grilling or roasting.
The juices from the food being cooked
collect under the insert. This prevents
them from spitting and making the oven
dirty. The juices can then be used for
making gravy and sauces.
The surface has been treated with
PerfectClean enamel.
27
Features
Pizza tray HBF 27-1
This circular pan is suitable for cooking
pizzas, flat cakes made with yeast or
whisked mixtures, sweet and savoury
tarts, baked desserts, and can also be
used for frozen cakes.
The surface has been treated with
PerfectClean enamel.
Pizza stone HBS 60
The pizza stone is ideal for items which
need a well-baked base such as pizza,
quiche, bread, bread rolls and savoury
snacks.
The baking stone is made from heat
retaining fire brick and is glazed.
Place it directly on the rack.
A wooden paddle is supplied with it for
placing food on the pizza stone and
taking it off.
Gourmet oven dishes HUB and lids
HBD
The Gourmet Miele oven dishes, unlike
other oven dishes, slide into the oven
on the shelf runners. They have non-tip
safety notches like the rack to prevent
them being pulled out too far.
They also have a non-stick coating.
The oven dishes have depths of 22 cm
or 35 cm. They have the same width
and height.
Suitable lids are available separately.
Please quote the model number of your
Miele oven dish when ordering a lid.
Depth: 22 cm Depth: 35 cm
HUB5000-M
HUB5001-M*
HBD 60-22 HBD 60-35
* Suitable for induction cooktops
HUB5000-XL
28
Features
Handle HEG
The handle makes it easier to take the
universal tray, baking tray and rack out
of the oven, or to put them into it. The
two prongs at the top go inside the tray
or above the rack, and the U-shape
supports underneath.
Descaling tablets, plastic tube with
suction cup
These are required for descaling the
appliance.
Catalytic enamelled liners
Side walls
–
These are installed behind the shelf
runners and protect the interior walls
against soiling.
Ceiling panel
–
This is installed above the top heat/
grill element and protects the ceiling
against soiling.
Back wall
–
Order this spare part if the catalytic
enamel has become ineffective due
to incorrect use or heavy soiling.
When ordering, please quote the model
number of your oven.
Original Miele all purpose microfibre
cloth
Light soiling and fingerprints can be
easily removed with the microfibre
cloth.
Original Miele oven cleaner
The Original Miele oven cleaner is
suitable for removing very stubborn
soiling from PerfectClean surfaces. It is
not necessary to pre-heat the oven
beforehand.
29
Features
Oven controls
In addition to operating the various
cooking functions for baking, roasting
and grilling, the oven controls are also
used to operate
the time of day display,
–
a minute minder,
–
a timer to automatically switch
–
cooking programmes on and off,
Moisture Plus cooking,
–
Automatic programmes,
–
– settings that can be customised.
Safety features
System lock 0 for the oven
The system lock prevents the oven from
being used unintentionally (see "System
lock 0").
The system lock will remain activated
even after an interruption to the power
supply.
Cooling fan
The cooling fan comes on automatically
when a cooking programme is started.
The cooling fan mixes hot air from the
oven cavity with cool room air before
venting it out into the kitchen through
vents located between the appliance
door and the control panel.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit.
When the temperature in the oven has
fallen sufficiently, the cooling fan will
switch off automatically.
Vented oven door
The door panes have a heat-reflective
coating.
When the oven is operating, air is
circulated through the door to keep the
outer pane cool.
The door can be removed and
disassembled for cleaning purposes
(See "Cleaning and care").
30
Loading...