Miele H 6100, H 6200 Installation Instructions Manual

Installation Instructions

H 6100 en - CA
H 6200

Installation, repair and maintenance work should be performed by
a Miele authorized service technician in accordance with national
and local safety regulations and the provided installation instructions.

Technical Service

92

After sales service

In the event of a fault which you cannot
easily correct yourself, please contact:

– your Miele dealer, or

– the Miele Technical Service

Department.

See back cover for contact details.

Please quote the model and serial
number of your appliance when
contacting Miele.

This information is given on the data
plate, visible on the front frame of the
oven, with the door fully open.

Warranty

For further information, please refer to
your warranty booklet.

Caring for the environment

93

Disposal of the packing
material

The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.

Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!

Disposal of your old appliance

Old electrical and electronic appliances
often still contain valuable materials.
However, they also contain harmful
substances that were essential for the
proper functioning and safe use of the
equipment. Handling these materials
improperly or disposing of them in your
household waste can be harmful to
your health and the environment.
Therefore, please do not dispose of
your old appliance with regular
household waste.

Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.

Please be sure that your old appliance
does not pose a danger to children
while being stored for disposal.

Electrical connection

94

ɘ CAUTION:

Before servicing, disconnect the
power supply by either removing the
fuse, shutting off the power main or
manually "tripping" the circuit
breaker.

Installation, repair and maintenance
work must be performed by a Miele
authorized service technician. Work
by unqualified persons could be
dangerous and may void the
warranty.

Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.

Only operate the appliance after it
has been installed into cabinetry.

The plug must be plugged into an
appropriate outlet that is installed
and grounded in accordance with all
local codes and ordinances.

WARNING: THIS APPLIANCE MUST
BE GROUNDED

Installer: Please leave these
instructions with the consumer.

The voltage can be adjusted (see
"Settings - ɠəɉ").

SAVE THESE INSTRUCTIONS FOR
THE ELECTRICAL INSPECTOR'S
USE.

NEMA 14-30P, L1, L2, N, G, 20 amp
208/240VAC

Installation diagrams

95

Appliance and cut-out dimensions

Miele ovens can be installed flush or proud. Discuss your installation
requirements with your architect, designer and installer.

Installation into a tall cabinet

BAB

A

7/8" (22*/23** mm)

22 1/16"

(560 mm)

17 1/2" (445 mm)

21 9/16" (549 mm)

23 7/16"

(595 mm)

17 15/16"
(455 mm)

22 1/16"

(560 mm)

4"

(100 mm)

17 3/4" - 17 13/16"

(450-452 mm)

21 5/8"

( 550 mm)

Ǟ

Cut-out (4" x 22" / 100 mm x 560 mm) in the bottom of the cabinet for power
cord and ventilation

ǟ

Power cord with plug

* Oven with glass front
** Oven with metal front

Front design may vary depending on model. For the more current specifications
please visit the Miele website.