Miele DGC 5051, DGC 5061 Fitting instructions

Installation instructions

Steam combi oven DGC 5051 DGC 5061

To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.

en-GB

M.-Nr. 07 671 660

Contents

Safety instructions for installation....................................3

Appliance and building-in dimensions ................................4

Installation in a tall unit...............................................4

Installation in a base unit .............................................6

Installation in a tall unit in combination with an oven........................8

Installing the appliance ............................................10

Electrical connection..............................................11

Connection cable..................................................12

Energy efficiency class ............................................13

Safety instructions for installation

The appliance must be installed by a suitably qualified and competent person in strict accordance with current national and local safety regulations.

Before installation, check the

appliance for visible signs of damage.

Before connecting the appliance,

make sure that the connection data on the data plate (voltage and connected load) match the mains electricity supply. Consult a qualified electrician if in any doubt.

The electrical safety of this

appliance can only be guaranteed when continuity is complete between it and an effective earthing system which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and regularly tested, and where there is any doubt, the household wiring system should be inspected by a qualified electrician. The manufacturer cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).

This appliance may only be used in

mobile installations if a risk assessment of the installation has been carried out by a suitably qualified engineer.

The appliance must be positioned

so that you can see the contents of a cooking container placed on the top runner. Otherwise you may risk scalding or burning yourself with hot water and food when taking containers out of the oven.

Keep these instructions in a safe place and pass them on to any future user.

All dimensions in this instruction booklet are given in mm.

Appliance and building-in dimensions

Installation in a tall unit

a Steam combi oven

b Building-in recess

c Inlet for mains connection cable to the appliance

d Recommended position for electrical connection.

Important: Do not position behind the appliance!

e Mains connection cable

* Appliances with glass front ** Appliances with metal front

Appliance and building-in dimensions

Cut-out for venting the steam combi oven

To ensure that the steam combi oven has adequate ventilation, a cut-out of 500 x 30 mm must be provided in the interim shelf above the appliance in the building-in niche a and also in the top of the tall unit b. No back panel may be present either behind the building-in niche or behind the area above the interim shelf in the tall unit.

+ 11 hidden pages