Metrohm tiamo 1.1 Installation
System requirements (minimal)
Computer Pentium 4, 1 GHz (or comparable)
Operating system Windows 2000 SP1, Windows XP Professional
Memory Program: 150 MB
Data: 2 GB (for about 5000 determinations)
RAM 512 MB
Serial ports for devices with RS232 interface
USB ports for devices with USB interface
The windows user must have administrator rights in order to be able to install the
tiamo software.
Additional requirements for the tiamo server:
Network 10 MBit/s, stable and permanent
Operating system Windows 2000 SP1, Windows XP Professional,
Windows 2000 Server, Windows 2003 Server
Installation
Single workplace installation
With this version the tiamo workplace and database will be installed on your computer.
1. On inserting the CD into the drive of your computer the installation will be
started automatically. If this option is deactivated on your computer double
click the file setup.exe.
If the minimum system requirements are not met (see above) a message
appears. Click on [Yes] if you like to install the programm nevertheless.
Afterwards, click on [Next].
2. After having read the license agreement for tiamo and accepting it with
[Yes] a window will appear where you can enter the license code. Depending on the license code which you have received together with the tiamo
software the assistant will guide you through the installation of the corresponding version:
light (single workplace version, max. 2 peripheral instruments)
full (single workplace version, peripheral instruments unlimited)
Confirm your entry with [Next].
8.101.0313 tiamo 1.1 09.2005/doe
3. Now enter the destination folder for the tiamo installation and confirm with
[Next].
4. In the dialogue window Additional installation information you can define
the path for the database and backup files:
Under Advanced... it is possible to change the ports tiamo uses to communicate with the database and administration server. If the ports are in use
already, an appropriate message will appear. Ask your system administrator
for more information about this. Continue with [Next].
5. Follow the instructions of the program until the following message appears:
This message points out which ports tiamo uses. Write down these ports
and inform your system administrator in case tiamo is not able to connect
to the database. Confirm the message with [OK].
6. As soon as the copying procedure has been terminated you can carry out
further Workplace settings:
2 8.101.0313 tiamo 1.1
Loading...