mercedes-benz AMG GT (2020) Owner's Manual

Digital – in the vehicleVehicle document walletDigital – on the InternetDigital – as an App
Familiarize yourself with the con‐ tents of the Operator's Manual directly via the vehicle's multi‐ media system (menu item "Vehi‐ cle"). Start with the quick guide, discover your vehicle's highlights or broaden your knowledge with useful tips.
Here you can find comprehen‐ sive information about operating your vehicle and about services and warranties in printed form.
You can find the Operator's Man‐ ual on the Mercedes-Benz home‐ page.
The Mercedes-Benz Guides App is available free-of-charge in familiar App stores.
É1905848905=ËÍ
1905848905
Apple®iOS Android
TM
Order no. P190 0530 13 Part no. 190 584 89 05 Edition C2020
Mercedes-AMG GT
Operator's Manual
Mercedes-Benz
Mercedes-Benz Mercedes-AMG GT
Publication details
Internet
Further information about Mercedes-Benz vehi‐ cles and about Daimler AG can be found on the following websites:
http://www.mbusa.com (USA only) http://www.mercedes-benz.ca (Canada only)
Documentation team
©
Daimler AG: not to be reprinted, translated or otherwise reproduced, in whole or in part, with‐ out written permission from Daimler AG.
Vehicle manufacturer
Daimler AG Mercedesstrasse 137 70327 Stuttgart Germany
Front passenger airbag warning
Example
&
WARNING Risk of injury or fatal injuries if the front-passenger airbag is enabled
If the front-passenger front airbag is enabled, a child on the front-passenger seat may be struck by the front-passenger airbag during an accident.
NEVER use a rearward-facing child restraint system on a seat with an ENABLED FRONT AIRBAG, DEATH or SERIOUS INJURY to the CHILD can occur.
Observe the chapter "Children in the vehicle".
As at 11 .11.18
Welcome to the world of Mercedes-AMG
Before you first drive off, read this Operator's Manual carefully and familiarize yourself with your vehicle. For your own safety and a longer operating lifespan of the vehicle, follow the instructions and warning notices in this Opera‐ tor's Manual. Disregarding them may lead to damage to the vehicle or injury to people.
Damage to the vehicle resulting from the disre‐ gard of the instructions is not covered by the Mercedes-Benz Limited Warranty.
The equipment or model designation of your vehicle may vary according to:
R
Model
R
Order
R
National version
R
Availability
Mercedes-AMG reserves the right to introduce changes in the following areas:
R
Design
R
Equipment
R
Technical features
The equipment in your vehicle may therefore dif‐ fer from that shown in the descriptions and illus‐ trations.
The following are integral parts of the vehicle:
R
Digital Operator's Manual
R
Printed Operator's Manual
R
Maintenance booklet
R
Equipment-dependent supplements
Keep these documents in the vehicle at all times. If you sell the vehicle, always pass all of the documents on to the new owner.
Mercedes-Benz USA, LLC Mercedes-Benz Canada, Inc. A Daimler Company
1905848905
1905848905
Symbols ........................................................ 5
At a glance .................................................... 6
Cockpit ........................................................... 6
Warning and indicator lamps .......................... 8
Overhead control panel ................................ 10
Door control panel and seat adjustment ....... 12
Emergencies and breakdowns ...................... 14
Digital Operator's Manual ......................... 16
Calling up the Digital Operator's Manual ...... 16
General notes ............................................. 17
Protecting the environment .......................... 17
Genuine Mercedes-Benz parts ...................... 17
Operator's Manual ........................................18
Service and vehicle operation ....................... 19
Operating safety ...........................................20
Declaration of conformity for wireless
vehicle components ...................................... 21
Diagnostics connection ................................ 21
Qualified specialist workshop ....................... 22
Correct use of the vehicle ............................23
Problems with your vehicle ........................... 23
Reporting safety defects ...............................23
Limited Warranty .......................................... 24
QR code for rescue card ...............................24
Data storage .................................................24
Copyright ...................................................... 27
Occupant safety ......................................... 29
Restraint system ...........................................29
Seat belts ..................................................... 31
Airbags ......................................................... 36
PRE-SAFE®system ....................................... 43
Safely transporting children in the vehi‐
cle ................................................................44
Notes on pets in the vehicle .........................50
Opening and closing .................................. 52
SmartKey ...................................................... 52
Doors ............................................................ 57
Cargo compartment ...................................... 61
Side windows ............................................... 64
Roller sun blinds ...........................................68
Anti-theft protection .....................................68
Seats and stowing ..................................... 70
Notes on the correct driver's seat posi‐
tion ............................................................... 70
Seats ............................................................ 70
Steering wheel ..............................................76
Easy entry and exit feature ...........................78
Operating the memory function .................... 79
Stowage areas .............................................. 80
Cup holder .................................................... 84
Ashtray and cigarette lighter ........................ 85
Sockets ......................................................... 86
Installing/removing the floor mats ............... 87
Light and visibility ..................................... 89
Exterior lighting ............................................ 89
Interior lighting ............................................. 93
Windshield wiper and windshield washer
system ..........................................................94
Mirrors .......................................................... 95
Operating the sun visors ...............................98
Climate control .......................................... 99
Overview of climate control systems ............ 99
Operating the climate control system ........... 99
2
Contents
Driving and parking ................................. 102
Driving ........................................................ 102
Race track operation ................................... 110
DYNAMIC SELECT switch ............................113
Automatic transmission .............................. 116
Refueling ..................................................... 120
Parking .......................................................122
Driving and driving safety systems .............130
Vehicle towing instructions .........................160
Instrument Display and on-board
computer ................................................... 161
Instrument Display overview .......................161
Overview of the buttons on the steering
wheel ..........................................................162
Operating the on-board computer .............. 162
Setting the design ....................................... 164
Setting the area for additional values .........164
Overview of displays on the multifunc‐
tion display .................................................165
Adjusting the instrument lighting ................165
Menus and submenus ................................. 165
Voice Control System ............................... 175
Notes on operating safety ...........................175
Operation ....................................................176
Using the Voice Control System effec‐
tively ........................................................... 177
Essential voice commands .......................... 178
Multimedia system .................................. 189
Overview and operation .............................. 189
System settings .......................................... 19 8
AMG TRACK PACE ...................................... 208
Navigation ................................................... 213
Telephone ...................................................237
Online and Internet functions ..................... 259
Media ......................................................... 265
Radio .......................................................... 277
Sound ......................................................... 284
Maintenance and care ............................. 287
ASSYST PLUS service interval display ........ 287
Engine compartment .................................. 288
Cleaning and care .......................................294
Breakdown assistance ............................ 303
Emergency .................................................. 303
Flat tire ....................................................... 303
Battery (vehicle) ......................................... 309
Tow starting or towing away ........................ 315
Electrical fuses ............................................ 319
Wheels and tires ...................................... 321
Notes on noise or unusual handling char‐
acteristics ...................................................321
Notes on regularly inspecting wheels and
tires ............................................................ 321
Notes on snow chains ................................ 322
Tire pressure .............................................. 322
Loading the vehicle .................................... 329
Tire labeling ................................................ 333
Definition of terms for tires and loading ..... 338
Changing a wheel ....................................... 341
Technical data .......................................... 351
Notes on technical data .............................. 351
Vehicle identification plate, VIN and
engine number ............................................ 351
Operating fluids .......................................... 353
Contents
3
Vehicle data ................................................ 359
Display messages and warning/indi‐
cator lamps .............................................. 362
Display messages .......................................362
Warning and indicator lamps ...................... 405
Index ......................................................... 422
4
Contents
In this Operator's Manual, you will find the fol‐ lowing symbols:
&
DANGER Danger due to not observing the warning notices
Warning notices draw your attention to haz‐ ards that may endanger your health or life, or the health or life of others.
#
Observe the warning notices.
+
ENVIRONMENTAL NOTE Environmental damage due to failure to observe envi‐ ronmental notes
Environmental notes include information on environmentally responsible behavior or envi‐ ronmentally responsible disposal.
#
Observe environmental notes.
*
NOTE Damage to property due to failure to observe notes on material damage
Notes on material damage inform you of risks which may lead to your vehicle being damaged.
#
Observe notes on material damage.
%
Useful instructions or further information that could be helpful to you.
X
Instruction
(Q page)
Further information on a topic
Display
Information on the multifunction dis‐ play/media display
+
Highest menu level, which is to be selected in the multimedia system
*
Corresponding submenus, which are to be selected in the multimedia sys‐ tem
*Marks a cause
Symbols
5
Left-hand drive vehicles
6
At a glance – Cockpit
1
Steering wheel paddle shifters
118
2
Combination switch
90
3
Media display
189
4
Glove box
82
5
Start/stop button
103
6
Climate control systems
99
7
Touchpad
189
8
Control knob for volume and switching sound on/off
189
Switches the multimedia system on/off
189
9
ECO start/stop function
108
A
Extends and retracts the rear wing
147
B
AMG Performance exhaust system
109
C
AMG E-SELECT selector lever
116
D
Activates/deactivates ESP
®
132
E
AMG adaptive sport suspension system
148
F
Manual gearshifting
118
G
DYNAMIC SELECT switch
113
H
Stowage compartment
81
I
Control panel for the multimedia system (steering wheel)
162
J
AMG steering-wheel buttons
146
K
Adjusts the steering wheel
77
L
Control panel for the on-board computer
162
Operates cruise control
138
Operates Active Distance Assist DISTRONIC
141
M
Diagnostics connection
21
N
Opens the hood
288
O
Opens the tailgate
61
P
Electric parking brake
128
Q
Light switch
89
At a glance – Cockpit
7
Instrument Display
8
At a glance – Warning and indicator lamps
1
Speedometer
161
2
#! Tu rn signal lights
90
3
Multifunction display
165
4
R Rear fog light
90
5
K High beam
90
L Low beam
89
T Parking lights
89
6
Ö Rear wing
147
7
Tachometer
161
8
? Coolant too hot/cold
416
9
Coolant temperature display
161
A
L Distance warning
415
B
ü Seat belt not fastened
414
C
h Tire pressure monitor
419
D
Ù Electric power steering malfunction
420
E
! Electric parking brake (yellow)
407
F
Electric parking brake applied (red)
407
F USA only
! Canada only
G
6 Restraint system
407
H
Brakes (red)
407
$ USA only
J Canada only
I
8 Fuel reserve with fuel filler cap location indicator
416
J
Fuel level indicator
K
ä AMG adaptive sport suspension system
415
L
# Electrical malfunction
416
M
; Check Engine
416
N
Æ ESP SPORT
407
O
! ABS malfunction
407
P
å ESP®OFF
407
At a glance – Warning and indicator lamps
9
10
At a glance – Overhead control panel
1
Sun visors
98
2
Switches the seat heating on/off
75
3
Switches the seat ventilation on/off
76
4
Front camera
152
5
Hazard warning lamps
91
6
Parking Assist PARKTRONIC
149
7
PASSENGER AIR BAG indicator lamp
41
8
| Switches automatic light control on/off
93
9
p Switches the right-hand reading lamp on/off
93
A
MB Info call button (Mercedes me connect)
253
B
Inside rearview mirror
96
C
SOS emergency call system (Mercedes-Benz emergency call system)
256
D
Breakdown assistance call button (Mercedes me connect)
253
E
p Switches the left-hand reading lamp on/off
93
F
c Switches the interior lighting on/off
93
G
u Switches the cargo compartment lamp on/off
93
At a glance – Overhead control panel
11
12
At a glance – Door control panel and seat adjustment
1
Opens the door
57
2
&%Locks/unlocks the vehicle
57
3
Operates the outside mirrors
95
4
W Opens/closes the right side window
64
5
W Opens/closes the left side window
64
6
Adjusting the head restraints
74
7
Adjusts the front seat mechanically
70
8
Operates the memory function
79
9
Sets the seat fore-and-aft position
72
A
Adjusts the seat cushion inclination
72
B
Adjusts the seat height
72
C
Adjusts the seat backrest inclination
72
D
Adjusts the 4-way lumbar support
73
At a glance – Door control panel and seat adjustment
13
14
At a glance – Emergencies and breakdowns
1
QR code for accessing the rescue card
24
2
Safety vests
303
3
Hazard warning lamps
91
4
Buttons for the SOS emergency call system and breakdown assistance
256
5
Checking and adding operating fluids
353
6
Tow-starting and towing away
315
7
Starting assistance
313
8
Flat tire
303
9
Fuel filler flap with instruction labels for tire pressure, fuel type and QR code for accessing the rescue card
120
A
TIREFIT kit
305
At a glance – Emergencies and breakdowns
15
Calling up the Digital Operator's Manual
Multimedia system:
4
Vehicle5Õ Operator's Manual
#
Select a menu item.
In addition, you can also call up the Operator's Manual within a main function (e.g. via Media
Info).
The Digital Operator's Manual describes the function and operation of the vehicle and the multimedia system.
For safety reasons, the Digital Operator's Man‐ ual is deactivated while driving.
The Digital Operator's Manual contains the fol‐ lowing menu items:
R
Search: allows you to search precisely for
keywords.
R
Quick start: provides you with important
information so that you can start using your vehicle immediately.
R
Tips: provides tips on how to use your vehicle
in certain situations.
R
Messages: provides you with further informa‐
tion about the messages in the instrument cluster.
R
Bookmarks: provides you with a list of all the
bookmarks you have stored yourself.
1
Picture
2
Menu
3
Navigation window
Some sections of the Digital Operator's Manual, such as warnings, can be made visible by high‐ lighting and pressing them.
%
The Operator's Manual can also be found in the Mercedes-Benz Guides app in all com‐ mon app stores.
16
Digital Operator's Manual
Protecting the environment
+
ENVIRONMENTAL NOTE Environmental damage due to operating conditions and personal driving style
The pollutant emission of your vehicle is directly related to the way you operate your vehicle.
Help to protect the environment by operating your vehicle in an environmentally responsi‐ ble manner. Please observe the following rec‐ ommendations on operating conditions and personal driving style.
Operating conditions:
#
Make sure that the tire pressure is cor‐ rect.
#
Do not carry any unnecessary weight (e.g. roof luggage racks once you no longer need them).
#
Adhere to the service intervals. A regularly serviced vehicle will contrib‐ ute to environmental protection.
#
Always have maintenance work carried out at a qualified specialist workshop.
Personal driving style:
#
Do not depress the accelerator pedal when starting the engine.
#
Do not warm up the engine while the vehicle is stationary.
#
Drive carefully and maintain a suitable distance from the vehicle in front.
#
Avoid frequent, sudden acceleration and braking.
#
Change gear in good time and use each gear only up to Ô of its maximum engine speed.
#
Switch off the engine in stationary traf‐ fic, e.g. by using the ECO start/stop function.
#
Drive fuel-efficiently. Observe the ECO display for a fuel-efficient driving style.
Environmental issues and recommendations:
It is recommended that you re-use or recycle materials instead of just disposing of them.
The relevant environmental guidelines and regu‐ lations serve to protect the environment and must be strictly observed.
Genuine Mercedes-Benz parts
+
ENVIRONMENTAL NOTE Environmental damage caused by not using recycled reconditioned components
Daimler AG offers recycled reconditioned components and parts with the same quality as new parts. The same entitlement from the Limited Warranty is valid as for new parts.
#
Use recycled reconditioned compo‐ nents and parts from Daimler AG.
General notes
17
*
NOTE Impairment of the operating effi‐ ciency of the restraint systems from installing accessory parts or from repairs or welding
Airbags and Emergency Tensioning Devices, as well as control units and sensors for the restraint systems, may be installed in the fol‐ lowing areas of your vehicle:
R
Doors
R
Door pillars
R
Door sills
R
Seats
R
Cockpit
R
Instrument cluster
R
Center console
R
Lateral roof frame
#
Do not install accessory parts such as audio systems in these areas.
#
Do not carry out repairs or welding.
#
Have aftermarket installation of acces‐ sories carried out at a qualified special‐ ist workshop.
You could jeopardize the operating safety of your vehicle if you use parts, tires and wheels as well as accessories relevant to safety which have not been approved by Mercedes-Benz. Safety-rele‐ vant systems, e.g. the brake system, may mal‐ function. Only use Mercedes-Benz Genuine Parts or parts of equal quality. Only use tires, wheels and accessories that have been specifically approved for your vehicle model.
Mercedes-Benz Genuine Parts are subject to strict quality control. Each part has been spe‐ cially developed, manufactured or selected for Mercedes-Benz vehicles and fine-tuned for them. Therefore, only Mercedes-Benz Genuine Parts should be used.
More than 300,000 different Mercedes-Benz Genuine Parts are available for Mercedes-Benz models.
All authorized Mercedes-Benz Centers maintain a supply of Mercedes-Benz Genuine Parts for
necessary service and repair work. In addition, strategically located parts delivery centers pro‐ vide for quick and reliable parts service.
Always specify the vehicle identification number (VIN) (/ page 351) when ordering Mercedes­Benz Genuine Parts.
Operator's Manual
This Operator's Manual describes all models and all standard and optional equipment available for your vehicle at the time of this Operator's Man‐ ual going to press. Country-specific differences are possible. Note that your vehicle may not be equipped with all features described. This is also the case for systems and functions relevant to safety. Therefore, the equipment on your vehicle may differ from that in the descriptions and illus‐ trations.
The original purchase agreement for your vehicle contains a list of all of the systems in your vehi‐ cle.
Should you have any questions concerning equipment and operation, please consult an authorized Mercedes-Benz Center.
18
General notes
The Operator's Manual and Maintenance Booklet are important documents and should be kept in the vehicle.
Service and vehicle operation
Vehicle operation outside the USA or Canada
When you are abroad with your vehicle, observe the following points:
R
service points or replacement parts may not be available immediately.
R
unleaded fuel may not be available for vehi‐ cles with a catalytic converter. Leaded fuel may cause damage to the catalytic converter.
R
the fuel may have an extremely low octane number. Unsuitable fuel can cause engine damage.
Some Mercedes-Benz models are available in Europe through our European Delivery Program. For more information, please consult an author‐ ized Mercedes‑Benz service center, or write to one of the following address:
in the USA:
Mercedes-Benz USA, LLC European Delivery Department One Mercedes-Benz Drive Sandy Springs, GA 30328
in Canada:
Mercedes-Benz Canada, Inc. European Delivery Department 98 Vanderhoof Avenue Toronto, Ontario M4G 4C9
Maintenance
Your customer advisor confirms the service in the service report.
Roadside Assistance
The Mercedes-Benz Roadside Assistance Pro‐ gram offers technical help in the case of a breakdown. Yo ur calls to the toll-free Roadside Assistance Hotline are answered by our agents 24 hours a day, 365 days a year.
1-800-FOR-MERCedes (1-800-367-6372) (USA)
1-800-387-0100 (Canada) You can find further information in the
Mercedes-Benz Roadside Assistance Program brochure (USA) or the "Roadside Assistance" section in the maintenance and warranty infor‐ mation booklet (Canada). You will find both in the vehicle document wallet.
Change of address or change of ownership
In the event of a change of address, please send us the "Notification of address change" in the Service and Guarantee booklet or simply call the Mercedes-Benz Customer Assistance Center (USA) on the hotline number 1-800-FOR-MERCedes (1-800-367-6372) or Cus‐ tomer Service (Canada) on 1-800-387-0100. We can then reach you in a timely fashion, if neces‐ sary.
If you sell your Mercedes, please leave all litera‐ ture in the vehicle so that it is available to the next owner. If you have purchased a used vehi‐ cle, please send us the "Notice of Purchase of Used Car" in the Service and Guarantee booklet or simply call the Mercedes-Benz Customer
General notes
19
Assistance Center (USA) at the hotline number 1-800-FOR-MERCedes (1-800-367-6372) or Cus‐ tomer Service (Canada) at 1-800-387-0100.
Possible danger due to substances hazard‐ ous to health
In compliance with Proposition 65 ("Prop65"), the following detachable label has been added to each vehicle sold in California:
Operating safety
&
WARNING Risk of accident due to mal‐ functions or system failures
If you do not have the prescribed service/ maintenance work or any required repairs carried out, this could result in malfunctions or system failures.
#
Always have the prescribed service/ maintenance work as well any required repairs carried out at a qualified spe‐ cialist workshop.
&
WARNING Risk of accident and injury as a result of incorrect modifications to electronic component parts
Modification to electronic components, their software or wiring could impair their function and/or the function of other networked com‐ ponent parts. In particular, systems relevant to safety could also be affected.
As a result, they may no longer function as intended and/or endanger the operating safety of the vehicle.
#
Never tamper with the wiring and elec‐ tronic component parts or their soft‐ ware.
#
You should have all work on electrical and electronic components carried out at a qualified specialist workshop.
Observe the "On-board electronics" section in "Technical data".
&
WARNING Risk of fire due to flammable materials on hot parts of the exhaust system
Flammable material such as leaves, grass or twigs may ignite if they come into contact with hot parts of the exhaust system.
#
When driving on unpaved roads or off­road, regularly check the vehicle under‐ side.
20
General notes
#
Remove trapped plants or other flam‐ mable material.
#
If there is damage, consult a qualified specialist workshop immediately.
*
NOTE Damage to the vehicle
In the following situations, in particular, there is a risk of damage to the vehicle:
R
The vehicle becomes grounded, e.g. on a high curb or an unpaved road
R
The vehicle is driven too fast over an obstacle, e.g. a curb, speed bump or pot‐ hole
R
A heavy object strikes the underbody or chassis components
In situations such as this, the body, the underbody, chassis components, wheels or tires could be damaged without the damage being visible. Components damaged in this way can unexpectedly fail or, in the case of an accident, may not absorb the loads that arise as intended.
If the underbody paneling is damaged, flam‐ mable materials such as leaves, grass or twigs can collect between the underbody and the underbody paneling. These materials may ignite if they come into contact with hot parts on the exhaust system.
#
Have the vehicle checked and repaired immediately at a qualified specialist workshop.
or
#
If driving safety is impaired while con‐ tinuing your journey, pull over and stop the vehicle immediately in accordance with the traffic conditions, and contact a qualified specialist workshop.
Declaration of conformity for wireless vehi‐ cle components
USA: "The wireless devices of this vehicle com‐
ply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) These devices may not cause harmful interference, and
2) These devices must accept any interference
received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment."
Canada: "The wireless devices of this vehicle comply with the Industry Canada license-exempt RSS standard(s). Operation is subject to the fol‐ lowing two conditions: (1) These devices may not cause interference, and (2) These devices must accept any interference, including interfer‐ ence that may cause undesired operation of the device."
Diagnostics connection
The diagnostics connection is only intended for the connection of diagnostic devices at a quali‐ fied specialist workshop.
General notes
21
&
WARNING Risk of accident due to con‐ necting devices to the diagnostics con‐ nection
If you connect equipment to a diagnostics connection in the vehicle, it may affect the operation of vehicle systems.
As a result, the operating safety of the vehi‐ cle could be affected.
#
Only connect equipment to a diagnos‐ tics connection in the vehicle which is approved for your vehicle by Mercedes­Benz.
&
WARNING Risk of accident due to objects in the driver's footwell
Objects in the driver's footwell may impede pedal travel or block a depressed pedal.
This jeopardizes the operating and road safety of the vehicle.
#
Stow all objects in the vehicle securely so that they cannot get into the driver's footwell.
#
Always install the floor mats securely and as prescribed in order to ensure that there is always sufficient room for the pedals.
#
Do not use loose floor mats and do not place floor mats on top of one another.
*
NOTE Battery discharging from using devices connected to the diagnostics connection
Using devices at the diagnostics connection drains the battery.
#
Check the charge level of the battery.
#
If the charge level is low, charge the battery, e.g. by driving a considerable distance.
Connecting equipment to the diagnostics con‐ nection can lead to emissions monitoring infor‐ mation being reset, for example. This may lead to the vehicle failing to meet the requirements of the next emissions inspection during the main inspection.
Qualified specialist workshop
An authorized Mercedes-Benz Center is a quali‐ fied specialist workshop. It has the necessary special skills, tools and qualifications to cor‐ rectly carry out the work required on your vehi‐ cle. This particularly applies to safety-relevant works.
For the following, always have your vehicle checked at an authorized Mercedes-Benz Cen‐ ter:
R
safety-relevant works
R
service and maintenance work
R
repair work
R
modifications as well as installations and conversions
R
work on electronic components
Mercedes‑AMG recommends a Mercedes‑Benz service center.
22
General notes
Correct use of the vehicle
If you remove any warning stickers, you or others could fail to recognize certain dangers. Leave warning stickers in position.
Observe the following information in particular when driving your vehicle:
R
the safety notes in this manual
R
technical data for the vehicle
R
traffic rules and regulations
R
laws and safety standards pertaining to motor vehicles
Problems with your vehicle
If you should experience a problem with your vehicle, particularly one that you believe may affect its safe operation, we urge you to contact an authorized Mercedes-Benz Center immedi‐ ately to have the problem diagnosed and recti‐ fied. If the problem is not resolved to your satis‐ faction, please discuss the problem again with an authorized Mercedes-Benz Center or, if nec‐
essary, contact us at one of the following addresses:
In the USA:
Mercedes-Benz USA, LLC Customer Assistance Center One Mercedes-Benz Drive Sandy Springs, GA 30328
In Canada:
Mercedes-Benz Canada, Inc. Customer Relations Department 98 Vanderhoof Avenue Toronto, Ontario M4G 4C9
Reporting safety defects
USA only:
The following text is published as required of manufacturers under Title 49, Code of U.S. Fed‐ eral Regulations, Part 575 pursuant to the "National Tr affic and Motor Vehicle Safety Act of 1966".
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Tr affic Safety Administration (NHTSA) in addition to notifying Mercedes-Benz USA, LLC.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Mercedes-Benz USA, LLC.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153) (inside the USA); go to http://www.safercar.gov; or write to: Adminis‐ trator, NHTSA, 400 Seventh Street, SW., Wash‐ ington, DC 20590, USA.
Further information on vehicle safety can be found at: http://www.safercar.gov
General notes
23
Limited Warranty
*
NOTE Damage to the vehicle arising from violation of these operating instruc‐ tions.
Damage to the vehicle can arise from viola‐ tion of these operating instructions.
This damage is not covered either by the Mercedes-Benz implied warranty or by the New‑ or Used-Vehicle Warranty.
#
Follow the instructions in these operat‐ ing instructions on proper operation of your vehicle as well as on possible vehi‐ cle damage.
QR code for rescue card
The QR code is secured in the fuel filler flap and on the opposite side on the B-pillar. In the event of an accident, rescue services can use the QR code to quickly find the appropriate rescue card for your vehicle. The current rescue card con‐ tains the most important information about your
vehicle in a compact form, e.g. the routing of the electric lines.
Further information can be obtained at http:// www.mercedes-benz.de/qr-code.
Data storage
Electronic control units
Electronic control units are installed in your vehi‐ cle. Some of these are necessary for the safe operation of your vehicle, while some assist you when driving (driver assistance systems). In addition, your vehicle provides comfort and entertainment functions, which are also made possible by electronic control units.
Electronic control units contain data memories which can temporarily or permanently store technical information about the vehicle's operat‐ ing state, component loads, maintenance requirements and technical events or malfunc‐ tions.
In general, this information documents the state of a component part, a module, a system or the surroundings such as:
R
Operating status of system components (e.g. fill levels, battery status, tire pressure)
R
Status messages concerning the vehicle or its individual components (e.g. number of wheel revolutions/speed, longitudinal accel‐ eration, lateral acceleration, display of fas‐ tened seat belts)
R
Malfunctions or faults in important system components (e.g. lights, brakes)
R
Information on events leading to vehicle damage
R
System reactions in special driving situations (e.g. airbag deployment, intervention of sta‐ bility control systems)
R
Ambient conditions (e.g. temperature, rain sensor)
In addition to providing the actual control unit function, this data assists the manufacturer in detecting and rectifying malfunctions and opti‐ mizing vehicle functions. The majority of this
24
General notes
data is temporary and is only processed in the vehicle itself. Only a small portion of the data is stored in the event or fault memory.
When your vehicle is serviced, technical data from the vehicle can be read out by service net‐ work employees (e.g. workshops, manufactur‐ ers) or third parties (e.g. breakdown services). Services include repair services, maintenance processes, warranty claims and quality assur‐ ance measures, for example. The read out is per‐ formed via the legally prescribed port for the diagnostics connection in the vehicle. The respective service network locations or third parties collect, process and use the data. They document technical statuses of the vehicle, assist in finding malfunctions and improving quality and are transmitted to the manufacturer, if necessary. Furthermore, the manufacturer is subject to product liability. For this, the manu‐ facturer requires technical data from vehicles.
Fault memories in the vehicle can be reset by a service outlet as part of repair or maintenance work.
Depending on the selected equipment, you can import data into vehicle convenience and info‐ tainment functions yourself.
This includes, for example:
R
Multimedia data such as music, films or pho‐ tos for playback in an integrated multimedia system
R
Address book data for use in connection with an integrated hands-free system or an inte‐ grated navigation system
R
Entered navigation destinations
R
Data about the use of Internet services
This data can be saved locally in the vehicle or it is located on a device which you have connected to the vehicle (e.g. a smartphone, USB flash drive or MP3 player). If this data is stored in the vehicle, you can delete it at any time. This data is sent to third parties only at your request, par‐ ticularly when you use online services in accord‐ ance with the settings that you have selected.
You can store or change convenience settings/ individualization in the vehicle at any time.
Depending on the equipment, this includes, for example:
R
Settings for the seat and steering wheel posi‐ tions
R
Suspension and climate control settings
R
Customizations such as interior lighting
If your vehicle is accordingly equipped, you can connect your smartphone or another mobile end device to the vehicle. You can control this by means of the control elements integrated in the vehicle. Images and audio from the smartphone can be output via the multimedia system. Cer‐ tain information is simultaneously transferred to your smartphone.
Depending on the type of integration, this can include:
R
General vehicle data
R
Position data
This allows you to use selected apps on your smartphone, such as navigation or music play‐ back. There is no further interaction between the smartphone and the vehicle; in particular, vehi‐ cle data is not directly accessible. Which type of
General notes
25
further data processing occurs is determined by the provider of the specific app used. Which set‐ tings you can make, if any, depends on the spe‐ cific app and the operating system of your smartphone.
Online services
Wireless network connection
If your vehicle has a wireless network connec‐ tion, it enables data to be exchanged between your vehicle and additional systems. The wire‐ less network connection is enabled via the vehi‐ cle's transmission and reception unit or via con‐ nected mobile end devices (e.g. smartphones). Online functions can be used via the wireless network connection. This includes online serv‐ ices and applications/apps provided by the man‐ ufacturer or other providers.
Manufacturer's services
Regarding online services of the manufacturer, the individual functions are described by the manufacturer in a suitable place (e.g. Operator's Manual, website of the manufacturer) along with the relevant data protection information. Per‐
sonal data may be used for the provision of online services. Data is exchanged via a secure connection, e.g. the manufacturer's designated IT systems. Personal data is collected, pro‐ cessed and used via the provision of services exclusively on the basis of legal permissions or with prior consent.
The services and functions (sometimes subject to a fee) can usually be activated or deactivated. In some cases, this also applies to the entire vehicle's data connection. This excludes, in par‐ ticular, legally prescribed functions and services.
Third party services
If it is possible to use online services from other providers, these services are the responsibility of the provider in question and subject to that provider's data protection conditions and terms of use. The manufacturer has no influence on the content exchanged.
For this reason, please ask the service provider for information about the type, extent and pur‐ pose of the collection and use of personal data when services are provided by third parties.
Multimedia system/Mercedes me connect
If the vehicle is equipped with the multimedia system or Mercedes me connect, additional data about the vehicle's operation, the use of the vehicle in certain situations, and the location of the vehicle may be compiled by the multimedia system or Mercedes me connect.
For additional information please refer to the chapter "Multimedia system" and/or the Mercedes me connect Terms and Conditions.
Event data recorders
USA only:
This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like sit‐ uations, such as an airbag deployment or hitting a road obstacle, data that will assist in under‐ standing how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
26
General notes
The EDR in this vehicle is designed to record such data as:
R
How various systems in your vehicle were operating
R
Whether or not the driver and front passenger seat belts were buckled/fastened
R
How far (if at all) the driver was depressing the accelerator and/or brake pedal and
R
How fast the vehicle was traveling
This data can help provide a better understand‐ ing of the circumstances in which accidents and injuries occur. NOTE: EDR data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the EDR under normal driving conditions and no personal data (e.g. name, gender, age and accident location) is recorded. However, other parties, such as law enforcement, could combine EDR data with the type of personally identifying data routinely acquired during a crash investigation.
Access to the vehicle and/or the EDR is needed to read data that is recorded by the EDR, and special equipment is required. In addition to the vehicle manufacturer, other parties that have the
special equipment, such as law enforcement, can read the information by accessing the vehi‐ cle or the EDR.
EDR data may be used in civil and criminal mat‐ ters as a tool in accident reconstruction, acci‐ dent claims and vehicle safety. Since the Crash Data Retrieval (CDR) tool that is used to extract data from the EDR is commercially available, Mercedes-Benz USA, LLC ("MBUSA") expressly disclaims any and all liability arising from the extraction of this information by unauthorized Mercedes-Benz personnel.
MBUSA will not share EDR data with others with‐ out the consent of the vehicle owner or, if the vehicle is leased, without the consent of the les‐ see. Exceptions to this representation include responses to subpoenas by law enforcement; by federal, state or local government; in connection with or arising out of litigation involving MBUSA or its subsidiaries and affiliates; or, as required by law.
Warning: the EDR is a component of the Restraint System Module. Tampering with, alter‐ ing, modifying or removing the EDR component
may result in a malfunction of the Restraint Sys‐ tem Module and other systems.
State laws or regulations regarding EDRs that conflict with federal regulation are pre-empted. This means that in the event of such conflict, the federal regulation governs. As of December 2016, 17 states have enacted laws relating to EDRs.
Copyright
Free and open source software
Information on license for free and open-source software used in your vehicle can be found on the data carrier in your vehicle document wallet and with updates on the following website:
http://www.mercedes-benz.com/opensource
Registered trademarks
R
Bluetooth®is a registered trademark of Blue‐ tooth SIG Inc.
R
DTS™ is a registered trademark of DTS, Inc.
General notes
27
R
Dolby®and MLP™ are registered trademarks of DOLBY Laboratories.
R
BabySmart™, ESP®and PRE-SAFE®are reg‐ istered trademarks of Daimler AG.
R
HomeLink®is a registered trademark of Johnson Controls.
R
iPod®and iTunes®are registered trademarks of Apple Inc.
R
Burmester®is a registered trademark of Burmester Audiosysteme GmbH.
R
Microsoft®and Windows Media®are regis‐ tered trademarks of Microsoft Corporation.
R
SIRIUS®is a registered trademark of Sirius XM Radio Inc.
R
HD Radio™ is a registered trademark of iBiq‐ uity Digital Corporation.
R
Gracenote®is a registered trademark of Gracenote, Inc.
R
ZAGATSurvey®and related brands are regis‐ tered trademarks of ZagatSurvey, LLC.
28
General notes
Restraint system
Protection by the restraint system
The restraint system includes the following com‐ ponents:
R
Seat belt system
R
Airbags
R
Child restraint system
The restraint system can help prevent the vehi‐ cle occupants from coming into contact with parts of the vehicle interior in the event of an accident. In the event of an accident, the restraint system can also reduce the forces to which the vehicle occupants are subjected.
A seat belt can only provide the best level of pro‐ tection if it is worn correctly. Depending on the detected accident situation, Emergency Tension‐ ing Devices and/or airbags supplement the pro‐ tection offered by a correctly worn seat belt. Emergency Tensioning Devices and/or airbags are not deployed in every accident.
In order for the restraint system to provide the intended level of protection, each vehicle occu‐ pant must observe the following information:
R
Fasten seat belts correctly.
R
Sit in an almost upright seat position with their back against the seat backrest.
R
Sit with their feet resting on the floor, if pos‐ sible.
R
Always secure persons under 5 ft (1.50 m) tall in an additional restraint system suitable for Mercedes-Benz vehicles.
However, no system available today can com‐ pletely eliminate injuries and fatalities in every accident situation. In particular, the seat belt and airbag generally do not protect against objects penetrating the vehicle from the outside. It is also not possible to completely rule out the risk of injury caused by the airbag deploying.
Reduced restraint system protection
&
WARNING Risk of injury or death from modifications to the restraint system
The restraint system can no longer function correctly after alterations have been made.
The restraint system may then not protect the vehicle occupants as intended by failing in an accident or triggering unexpectedly, for example
#
Never alter the parts of the restraint system.
#
Never tamper with the wiring or any electronic component parts or their software.
If it is necessary to modify the vehicle to accom‐ modate a person with disabilities, contact an authorized Mercedes-Benz Center for details.
USA only: for details, contact our Customer Assistance Center on 1-800-FOR-MERCedes (1‑800‑367‑6372).
Occupant safety
29
Restraint system functionality
When the ignition is switched on, a self-test is performed, during which the 6 restraint sys‐ tem warning lamp lights up. It goes out no later than a few seconds after the vehicle is started. The components of the restraint system are then functional.
Malfunctioning restraint system
A malfunction has occurred in the restraint sys‐ tem if:
R
The 6 restraint system warning lamp does not light up when the ignition is switched on
R
The 6 restraint system warning lamp lights up continuously or repeatedly during a journey
&
WARNING Risk of injury due to malfunc‐ tions in the restraint system
If the restraint system is malfunctioning, restraint system components may be trig‐
gered unintentionally or may not deploy as intended during an accident. This may affect the Emergency Tensioning Devices or air‐ bags, for example.
#
Have the restraint system checked and repaired immediately at a qualified spe‐ cialist workshop.
Function of the restraint system in an acci‐ dent
How the restraint system works is determined by the severity of the impact detected and the type of accident anticipated:
R
Frontal impact
R
Rear impact
R
Side impact
R
Rollover
The activation thresholds for the components of the restraint system are determined based on the evaluation of the sensor values measured at various points in the vehicle. This process is pre­emptive in nature. The triggering/deployment of
the components of the restraint system must take place in good time at the start of the colli‐ sion.
Factors which can only be seen and measured after a collision has occurred do not play a deci‐ sive role in the deployment of an airbag. Nor do they provide an indication of airbag deployment.
The vehicle may be deformed significantly with‐ out an airbag being deployed. This is the case if only parts which are relatively easily deformed are affected and the rate of vehicle deceleration is not high. Conversely, an airbag may be deployed even though the vehicle suffers only minor deformation. If very rigid vehicle parts such as longitudinal members are hit, for exam‐ ple, this may result in sufficiently high levels of vehicle deceleration.
30
Occupant safety
The components of the restraint system can be activated or deployed independently of each other:
Component Detected deploy‐
ment situation
Emergency Tension‐ ing Devices
Frontal impact, rear impact, side impact, rollover
Driver's airbag, front passenger airbag
Frontal impact
Knee airbag Frontal impact
Side airbag Side impact
Window curtain air‐ bag
Side impact, rollover, frontal impact
The front passenger airbag can only be deployed in an accident if the PASSENGER AIR BAG OFF indicator lamp is off. If the front passenger seat is occupied, make sure, both before and during the journey, that the status of the front passenger airbag is correct (/ page 41 ).
&
WARNING Risk of burns from hot air bag components
The air bag parts are hot after an air bag has been deployed.
#
Do not touch the air bag parts.
#
Have a deployed air bag replaced at a qualified specialist workshop as soon as possible.
Mercedes-Benz recommends that you have the vehicle towed to a qualified specialist workshop after an accident. Ta ke this into account, partic‐ ularly if an Emergency Tensioning Device is trig‐ gered or an airbag deployed.
If the Emergency Tensioning Devices are trig‐ gered or an airbag is deployed, you will hear a bang, and a small amount of powder may also be released:
R
The bang will not generally affect your hear‐ ing.
R
In general, the powder released is not haz‐ ardous to health but may cause short-term
breathing difficulties to persons suffering from asthma or other pulmonary conditions.
Provided it is safe to do so, leave the vehicle immediately or open the window in order to prevent breathing difficulties.
Airbags and pyrotechnic Emergency Tensioning Devices contain perchlorate material, which may require special handling or environmental pro‐ tection measures. National guidelines regarding waste disposal must be observed. In California, see http://www.dtsc.ca.gov/HazardousWaste/ Perchlorate/index.cfm.
Seat belts
Protection provided by the seat belt
Always fasten your seat belt correctly before starting a journey. A seat belt can only provide the best level of protection if it is worn correctly.
Occupant safety
31
&
WARNING Risk of injury or death due to incorrectly fastened seat belt
If the seat belt is not worn correctly, it can‐ not perform its intended protective function.
In addition, an incorrectly fastened seat belt can also cause injuries, for example, in the event of an accident or when braking or changing direction suddenly.
#
Always ensure that all vehicle occu‐ pants have their seat belts fastened correctly and are sitting properly.
Always observe the instructions about the cor‐ rect driver's seat position and adjusting the seats (/ page 70).
In order for the correctly worn seat belt to pro‐ vide the intended level of protection, each vehi‐ cle occupant must observe the following infor‐ mation:
R
The seat belt must not be twisted and must fit tightly and snugly across the body.
R
The seat belt must be routed across the cen‐ ter of the shoulder and as low down across the hips as possible.
R
The shoulder section of the seat belt should not touch your neck nor be routed under your arm or behind your back.
R
Avoid wearing bulky clothing, e.g. a winter coat.
R
Push the lap belt down as far as possible across your hips and pull tight with the shoul‐ der section of the belt. Never route the lap belt across your abdomen.
Pregnant women must also take particular care with this.
R
Never route the seat belt across sharp, poin‐ ted, abrasive or fragile objects.
R
Only one person may use each seat belt at any one time. Infants and children must never travel sitting on the lap of a vehicle occupant.
R
Never secure objects with a seat belt if the seat belt is being used by one of the vehi‐ cle's occupants. Always observe the instruc‐
tions for loading the vehicle when securing objects, luggage or loads (/ page 80).
Also ensure that no objects, e.g. a cushion, are ever placed between a person and the seat.
The co-driver seat belt is equipped with a special seatbelt retractor.
Activate or deactivate the special seatbelt retractor of the seat belt (/ page 48).
If children are traveling in the vehicle, be sure to observe the instructions and safety notes on "Children in the vehicle" (/ page 45).
Reduced seat belt protection
&
WARNING Risk of injury or death due to incorrect seat position
The seat belt does not offer the intended level of protection if you have not moved the seat backrest to an almost vertical position.
When braking or in the event of an accident, you could slide underneath the seat belt and
32
Occupant safety
sustain abdominal or neck injuries, for exam‐ ple.
#
Adjust the seat properly before begin‐ ning your journey.
#
Always ensure that the seat backrest is in an almost vertical position and that the shoulder section of your seat belt is routed across the center of your shoul‐ der.
&
WARNING Risk of injury or death when additional restraint systems are not used for persons with a smaller build
Persons under 5 ft (1.50 m) tall cannot wear the seat belt correctly without a suitable additional restraint system.
If the seat belt is not worn correctly, it can‐ not perform its intended protective function. In addition, an incorrectly fastened seat belt can also cause injuries, for example, in the event of an accident or when braking or changing direction suddenly.
#
Always secure persons under 5 ft (1.50 m) tall in a suitable restraint sys‐ tem.
&
WARNING Risk of injury or death due to damaged or modified seat belts
Seat belts cannot provide protection in the following situations:
R
The seat belt is damaged, has been modi‐ fied, is extremely dirty, bleached or dyed
R
The seat belt buckle is damaged or extremely dirty
R
Modifications have been made to the Emergency Tensioning Device, seat belt anchorage or seat belt retractor
Seat belts may sustain non-visible damage in an accident, e.g. due to glass splinters.
Modified or damaged seat belts could tear or fail in the event of an accident, for example.
Modified Emergency Te nsioning Devices may be deployed unintentionally or not function as intended.
#
Never modify the seat belts, Emergency Tensioning Devices, seat belt ancho‐ rages or seat belt retractors.
#
Make sure that the seat belts are not damaged, are not worn and are clean.
#
Always have the seat belts checked immediately after an accident at a qualified specialist workshop.
Only use seat belts which have been approved for your vehicle by Mercedes-Benz.
Vehicles with AMG Performance seats
The AMG Performance seat is designed for the standard three-point seat belt. If you install a dif‐ ferent multipoint seat belt, e.g. sport or racing seat belts, the restraint system cannot provide the intended level of protection.
&
WARNING Risk of injury or fatal injury due to modified seat belt systems
If you feed seat belts through the opening in the seat backrest, the seat backrest may be damaged or may even break in the event of an accident.
Occupant safety
33
#
Only use the standard three-point seat belt.
#
Never modify the seat belt system.
All vehicles
&
WARNING Risk of injury or death from deployed pyrotechnic Emergency Ten‐ sioning Devices
Pyrotechnic Emergency Tensioning Devices that have been deployed are no longer opera‐ tional and are unable to perform their inten‐ ded protective function.
#
Therefore, have deployed pyrotechnic Emergency Tensioning Devices immedi‐ ately replaced at a qualified specialist workshop.
Mercedes-Benz recommends that you have the vehicle towed to a qualified specialist workshop after an accident.
*
NOTE Damage caused by trapping the seat belt
If an unused seat belt is not fully retracted, it may become trapped in the door or in the seat mechanism.
#
Always ensure that an unused seat belt is fully retracted.
Fastening seat belts
If the seat belt is pulled quickly or sharply, the seat belt retractor locks. The seat belt strap can‐ not be pulled out any further.
#
Always engage seat belt tongue 2 of the seat belt into seat belt buckle 1 of the cor‐ responding seat.
Vehicles with automatic front passenger air‐ bag shutoff:
34
Occupant safety
*
NOTE Deployment of the Emergency Tensioning Device and side air bag when the front passenger seat is unoccupied
If the seat belt tongue is engaged in the seat belt buckle of the unoccupied front passenger seat, the Emergency Tensioning Device and the side air bag may also deploy in the event of an accident along with other systems.
#
Only one person should use each seat belt at any one time.
Vehicles without automatic front passenger airbag shutoff:
*
NOTE Deployment of the Emergency Tensioning Device when the front­passenger seat is unoccupied
If the seat belt tongue is engaged in the seat belt buckle of the unoccupied front­passenger seat, the Emergency Tensioning Device may also deploy in the event of an accident along with other systems.
#
Only one person should use each seat belt at any one time.
Seat belt adjustment function
Vehicles with PRE-SAFE®: If the seat belt is not
pulled tightly across your body, the seat belt adjustment may automatically apply a certain tightening force. Do not hold the seat belt tightly while it is adjusting.
You can activate and deactivate the seat belt adjustment function using the multimedia sys‐ tem (/ page 35).
Releasing seat belts
#
Press the release button in the seat belt buckle and guide the seat belt back with the seat belt tongue.
Activating/deactivating seat belt adjustment via the multimedia system
Multimedia system:
4
Vehicle5î Vehicle Settings
5
Belt Adjustment
#
Activate O or deactivate ª the function.
Seat belt warning function for the driver and front passenger
The ü seat belt warning lamp in the Instru‐ ment Display is a reminder that all vehicle occu‐ pants must wear their seat belts correctly.
The ü seat belt warning lamp lights up for six seconds every time the vehicle is started.
In addition, a warning tone may sound. When the driver's and front passenger's doors
are closed and the driver and front passenger have fastened their seat belts, the seat belt warning goes out.
Occupant safety
35
In the following cases, the seat belt warning lights up during a journey if:
R
The vehicle speed exceeds 15 mph (25 km/h) and the driver's or front passenger seat belt is not fastened.
R
The driver or front passenger unfastens their seat belt while the vehicle is in motion.
Airbags
Overview of airbags
1
Driver's airbag
2
Front passenger airbag
3
Front passenger knee airbag
4
Window curtain airbag
5
Side airbag
6
Driver's knee bag
The installation location of an airbag can be rec‐ ognized by the AIRBAG marking.
When enabled, an airbag can provide additional protection for the respective vehicle occupant.
Potential protection from each airbag:
AIRBAG Potential protection for:
Knee airbag Thigh, knee and lower leg
Driver's airbag, front passenger airbag
Head and ribcage
Window curtain airbag
Head
Side airbag Ribcage
&
WARNING Risk of injury or fatal injuries if the front-passenger airbag is enabled
If the front-passenger front airbag is enabled, a child on the front-passenger seat may be struck by the front-passenger airbag during an accident.
NEVER use a rearward-facing child restraint system on a seat with an ENABLED FRONT AIRBAG, DEATH or SERIOUS INJURY to the CHILD can occur.
When installing a child restraint system on the front passenger seat, observe the vehicle-spe‐ cific information (/ page 49). Also, always observe the notes on rearward-facing or forward-facing child restraint systems on the front passenger seat.
Vehicles with automatic front passenger air‐ bag shutoff:
The front passenger airbag can only be deployed in an accident if the PASSENGER AIR BAG OFF indicator lamp is off. If the front passenger seat is occupied, make sure, both before and during
36
Occupant safety
the journey, that the status of the front passenger airbag is correct (/ page 41 ).
*
NOTE Important points to remember if the front passenger seat is unoccupied
In an accident, the components of the restraint system may deploy unnecessarily on the front passenger side if:
R
There are heavy objects on the front passenger seat.
R
The seat belt tongue is engaged in the seat belt buckle of the front passenger seat and the front passenger seat is unoccupied.
#
Stow objects in a suitable place.
#
Only one person should use each seat belt at any one time.
Depending on the detected accident situation, the window curtain airbag on the front passenger side may deploy. The airbag is deployed regardless of whether the front passenger seat is occupied.
Protection by the airbags
Depending on the accident situation, an airbag may supplement the protection offered by a cor‐ rectly fastened seat belt.
&
WARNING Risk of injury or death due to incorrect seat position
If you deviate from the correct seat position, the airbag cannot perform its intended pro‐ tective function and deployment may even cause further injuries.
In order to avoid risks, each vehicle occupant must always make sure of the following:
R
Fasten seat belts correctly. Pregnant women must take particular care to ensure that the lap belt never lies across the abdomen.
R
Adopt the correct seat position and keep as far away as possible from the airbags.
R
Observe the following information.
#
Always make sure that there are no objects between the airbag and vehicle occupant.
To avoid the risks resulting from the deployment of an airbag, each vehicle occupant must observe the following information in particular:
R
Before starting your journey, adjust your seat correctly; the driver's seat and front passenger seat should be moved as far back as possible.
When doing so, always observe the informa‐ tion on the correct driver's seat position (/ page 70).
R
Only hold the steering wheel by the steering wheel rim. This allows the airbag to be fully deployed.
R
Always lean against the seat backrest when the vehicle is in motion. Do not lean forwards or against the door or side window. You may otherwise be in the deployment area of the airbags.
R
Always keep your feet on the floor. Do not put your feet on the cockpit, for example.
Occupant safety
37
Your feet may otherwise be in the deploy‐ ment area of the airbag.
R
If children are traveling in the vehicle, observe the additional notes (/ page 45).
R
Always stow and secure objects correctly.
Objects in the vehicle interior may prevent an airbag from functioning correctly. Each vehicle occupant must always make sure of the follow‐ ing in particular:
R
There are no people, animals or objects between the vehicle occupants and an air‐ bag.
R
There are no objects between the seat, door and door pillar (B-pillar).
R
There are no hard objects, e.g. coat hangers, hanging on the grab handles or coat hooks.
R
There are no accessory parts, such as mobile navigation devices, mobile phones or cup holders, attached to the vehicle within the deployment area of an airbag, e.g. on the cockpit, on the door, on the side window or on the side wall trim.
In addition, no connecting cables, tensioning straps or retaining straps must be routed or attached to the vehicle within the deploy‐ ment area of an airbag. Always comply with the accessory manufacturer's installation instructions and, in particular, the notes on suitable places for installation.
R
There are no heavy, sharp-edged or fragile objects in the pockets of your clothing. Store such objects in a suitable place.
Limited protection provided by airbags
&
WARNING Risk of injury due to modifi‐ cations to the airbag cover
If you modify the cover of an airbag or affix objects such as stickers to it, the airbag may no longer function correctly.
#
Never modify the cover of an airbag and do not affix objects to it.
The installation location of an airbag is identified by the AIRBAG symbol (/ page 36).
&
WARNING Risk of injury or death due to the use of unsuitable seat covers
Unsuitable seat covers can obstruct or pre‐ vent the deployment of air bags integrated into the seats.
Consequently, the air bags cannot protect vehicle occupants as they are designed to do. In addition, operation of the automatic front passenger air bag shutoff may be restricted.
#
You should only use seat covers that have been approved for the correspond‐ ing seats by Mercedes-Benz.
&
WARNING Risk of injury due to malfunc‐ tions of the sensors in the door paneling
Sensors to control the airbags are located in the doors. Modifications or work not per‐ formed correctly to the doors or door panel‐ ing, as well as damaged doors, can lead to the function of the sensors being impaired. The airbags might therefore not function properly any more.
38
Occupant safety
Consequently, the airbags cannot protect vehicle occupants as they are designed to do.
#
Never modify the doors or parts of the doors.
#
Always have work on the doors or door paneling carried out at a qualified spe‐ cialist workshop.
&
WARNING Risk of injury due to deployed airbag
A deployed airbag no longer has a protective function and cannot protect as intended in the event of an accident.
#
Have the vehicle towed to a qualified specialist workshop in order to have the deployed airbag replaced.
Have deployed airbags replaced immediately.
Status of the front passenger front airbag
Function of the automatic front passenger airbag shutoff
The automatic front passenger airbag shutoff is able to detect whether the front passenger seat is occupied by a person or a child restraint sys‐ tem. The front passenger airbag and front passenger knee airbag are enabled or disabled accordingly.
When installing a child restraint system on the front passenger seat, always make sure of the following:
R
Ensure that the child restraint system is posi‐ tioned correctly (/ page 44).
R
Always observe the child restraint system manufacturer's installation instructions.
R
Never place objects, e.g. cushions, under or behind the child restraint system.
R
Fully retract the seat cushion length adjust‐ ment.
R
The entire base of the child restraint system must always rest on the seat cushion of the front-passenger seat.
R
The backrest of the forward-facing child restraint system must lie as flat as possible against the backrest of the front-passenger seat.
R
The child restraint system must not touch the roof or be put under strain by the head restraints. Adjust the seat backrest inclina‐ tion and the head restraint setting accord‐ ingly.
&
WARNING Risk of injury or death due to objects between the sitting surface and the child restraint system
Objects between the sitting surface and the child restraint system could affect the func‐ tion of the automatic front passenger airbag shutoff.
This could result in the front passenger air‐ bag not functioning as intended during an accident.
#
Do not place any objects between the sitting surface and the child restraint system.
Occupant safety
39
#
The entire base of the child restraint system must always rest on the sitting surface of the front passenger seat.
#
The backrest of the forward-facing child restraint system must, as far as possi‐ ble, be resting on the seat backrest of the front passenger seat.
#
Always comply with the child restraint system manufacturer's installation instructions.
A person on the front passenger seat must observe the following information:
R
Fasten seat belts correctly (/ page 31).
R
Sit in an almost upright seat position with their back against the seat backrest.
R
Sit with their feet resting on the floor, if pos‐ sible.
The front passenger airbag may otherwise be disabled by mistake, for example in the following situations:
R
The front passenger transfers their weight by supporting themselves on a vehicle armrest.
R
The front passenger sits in such a way that their weight is raised from the sitting sur‐ face.
&
WARNING Risk of injury or death due to deactivated front passenger airbag
If the PASSENGER AIR BAG OFF indicator lamp is lit, the front passenger airbag is disa‐ bled. It will not be deployed in the event of an accident and cannot perform its intended protective function.
A person in the front passenger seat could then, for example, come into contact with the vehicle interior, especially if the person is sitting too close to the cockpit.
If the front passenger seat is occupied, always ensure that:
R
The classification of the person in the front passenger seat is correct and the front passenger airbag is enabled or disa‐ bled in accordance with the person in the front passenger seat.
R
The front passenger seat has been moved as far back as possible.
R
The person is seated correctly.
#
Ensure, both before and during the jour‐ ney, that the status of the front passenger airbag is correct.
If the front passenger seat is occupied, the clas‐ sification of the person or child restraint system on the front passenger seat takes place after the front passenger airbag shutoff self-test. The PASSENGER AIR BAG indicator lamps display the status of the front passenger airbag.
Always observe the notes on the function of the PASSENGER AIR BAG indicator lamps (/ page 41 ).
40
Occupant safety
Function of the PASSENGER AIR BAG indica‐ tor lamps
Self-test of automatic front passenger airbag shutoff
When the ignition is switched on, a self-test is performed during which the two PASSENGER AIR BAG ON and OFF indicator lamps light up simultaneously.
The status of the front passenger airbag is dis‐ played after the self-test:
R
PASSENGER AIR BAG ON lights up for 60 seconds, subsequently both indicator lamps are off (PASSENGER AIR BAG ON and OFF): the front passenger airbag is able to deploy in the event of an accident.
R
PASSENGER AIR BAG OFF lights up continu‐ ously: the front passenger airbag is disabled. It will then not be deployed in the event of an accident.
If the PASSENGER AIR BAG ON indicator lamp is off, only the PASSENGER AIR BAG OFF indicator lamp shows the status of the front passenger airbag. The PASSENGER AIR BAG OFF indicator lamp may be lit continuously or be off.
If the PASSENGER AIR BAG OFF indicator lamp and the 6 restraint system warning lamp light up simultaneously, the front passenger seat may not be used. Also in this case, do not install a child restraint system on the front passenger seat. Have automatic front passenger airbag shutoff checked and repaired immediately at a qualified specialist workshop.
Status display
If the front passenger seat is occupied, ensure, both before and during the journey, that the sta‐ tus of the front passenger airbag is correct for the current situation.
After installing a rearward-facing child restraint system on the front passenger seat: PASSENGER AIR BAG OFF must be lit con‐
tinuously.
&
WARNING Risk of injury or death from using a rearward-facing child restraint system when the front passenger front airbag is enabled
If you secure a child in a rearward-facing child restraint system on the front passenger seat and the PASSENGER AIR BAG OFF indi‐ cator lamp is off, the front passenger airbag can deploy in the event of an accident.
The child could be struck by the airbag. Always ensure that the front passenger air‐
bag is deactivated. The PA SSENGER AIR BAG OFF indicator lamp must be lit.
Occupant safety
41
NEVER use a rearward-facing child restraint system on a seat protected by an ENABLED FRONT AIRBAG in front of it, DEATH or SERI‐ OUS INJURY to the CHILD can occur.
When installing a child restraint system on the front passenger seat, observe the vehicle-spe‐ cific information (/ page 49).
Depending on the child restraint system and the stature of the child, the PASSENGER AIR BAG OFF indicator lamp may be off. In this case, do not install the rearward-facing child restraint system on the front passenger seat.
After installing a forward-facing child restraint system on the front passenger seat: depending on the child restraint system
and the stature of the child, PASSENGER AIR BAG OFF may be lit continuously or be off. Always observe the following information.
&
WARNING Risk of injury or fatal injury due to incorrect positioning of the child restraint system
If you secure a child in a forward-facing child restraint system on the front passenger seat and you position the front passenger seat too close to the cockpit, in the event of an acci‐ dent, the child could:
R
come into contact with parts of the vehi‐ cle's interior if the PASSENGER AIR BAG OFF indicator lamp is lit, for example.
R
be struck by the airbag if the PASSENGER AIR BAG OFF indicator lamp is off.
#
Always move the front passenger seat as far back as possible. Always make sure that the shoulder belt strap is cor‐ rectly routed from the seat belt guide on the vehicle to the shoulder belt guide on the child restraint system. The shoulder belt strap must be routed for‐ wards and downwards from the seat belt guide.
#
Always observe the child restraint sys‐ tem manufacturer's installation instruc‐ tions.
When installing a child restraint system on the front passenger seat, observe the vehicle-spe‐ cific information (/ page 49).
If a person is sitting on the front passenger seat: PASSENGER AIR BAG OFF may be lit con‐
tinuously or be off, depending on the person's stature.
A person on the front passenger seat must always observe the following information:
R
If the front passenger seat is occupied by an adult or a person with a stature correspond‐ ing to that of an adult, the PASSENGER AIR BAG OFF indicator lamp must be off. This indicates that the front passenger airbag is enabled.
If the PASSENGER AIR BAG OFF indicator lamp is lit continuously, an adult or person with a build corresponding to that of an adult should not use the front passenger seat.
42
Occupant safety
R
If the front passenger seat is occupied by a person of smaller stature (e.g. a teenager or small adult), the PASSENGER AIR BAG OFF indicator lamp either lights up continuously or remains off, depending on the result of the classification.
-
If the PASSENGER AIR BAG OFF indicator lamp is off: move the front passenger seat as far back as possible.
-
If the PASSENGER AIR BAG OFF indicator lamp is lit continuously: the person of smaller stature should not use the front passenger seat.
&
WARNING Risk of injury or death when the PA SSENGER AIR BAG OFF indicator lamp is lit
If the PASSENGER AIR BAG OFF indicator lamp remains lit after the system self-test, the front passenger air bag is deactivated. It will not be deployed in the event of an acci‐ dent. In this case, the front passenger air bag cannot perform its intended protective func‐
tion, e.g. when a person is seated in the front passenger seat.
That person could, for example, come into contact with the vehicle interior, especially if the person is sitting too close to the cockpit.
If the front passenger seat is occupied, always ensure that:
R
The classification of the person in the front passenger seat is correct and the front passenger air bag is enabled or deactivated in accordance with the per‐ son in the front passenger seat.
R
The person is seated properly with a cor‐ rectly fastened seat belt.
R
The front passenger seat has been moved as far back as possible.
Be sure to also observe the following further related subjects:
R
Child restraint system on the front passenger seat (/ page 49).
PRE-SAFE®system
PRE-SAFE®(anticipatory occupant protec‐ tion)
PRE-SAFE®is able to detect certain critical driv‐ ing situations and implement pre-emptive meas‐ ures to protect the vehicle occupants.
PRE-SAFE®can implement the following meas‐ ures independently of each other:
R
Tightening the seat belts on the driver's seat and front passenger seat.
R
Closing the side windows.
R
Vehicles with memory function: Moving the front passenger seat to a more favorable seat position.
R
PRE-SAFE®Sound: provided that the multi‐ media system is switched on, generates a brief noise signal to stimulate the innate pro‐ tective mechanism of a person's hearing.
Occupant safety
43
*
NOTE Damage caused by objects in the footwell or behind the seat
The automatic adjustment of the seat posi‐ tion may result in damage to the seat and/or the object.
#
Stow objects in a suitable place.
Reversing the PRE-SAFE®system measures
If an accident did not occur, the pre-emptive measures that were taken are reversed.
You will need to perform certain settings your‐ self.
#
If the seat belt pre-tensioning is not reduced, move the seat backrest back slightly. The locking mechanism releases.
Safely transporting children in the vehicle
Always observe when children are traveling in the vehicle
%
Also strictly observe the safety notes for the specific situation. In this way you can recog‐
nize potential risks and avoid dangers if chil‐ dren are traveling in the vehicle (/ page 45).
Be diligent
Bear in mind that neglecting to secure a child in the child restraint system may have serious con‐ sequences. Always be diligent in securing a child carefully before every journey.
To improve protection for children younger than 12 years old or under 5 ft (1.50 m) in height, Mercedes-Benz recommends you observe the following information:
R
Always secure the child in a child restraint system suitable for this Mercedes-Benz vehi‐ cle.
R
The child restraint system must be appropri‐ ate to the age, weight and size of the child.
R
The vehicle seat must be suitable for instal‐ ling a child restraint system.
Generic term "child restraint system"
The generic term child restraint system is used in this Operator's Manual. A child restraint sys‐ tem is, for example:
R
a baby car seat
R
a rearward-facing child seat
R
a forward-facing child seat
R
a child booster seat with a backrest and seat belt guide
The child restraint system must be appropriate to the age, weight and size of the child.
Observing laws and legal requirements
Always observe the legal requirements when using a child restraint system in the vehicle.
Observing standards for child restraint sys‐ tems
All child restraint systems must meet the follow‐ ing standards:
R
U.S. Federal Motor Vehicle Safety Standards 213 and 225
44
Occupant safety
R
Canadian Motor Vehicle Safety Standards 213 and 210.2
Confirmation that the child restraint system complies with the standards can be found on an instruction label on the child restraint system. This confirmation can also be found in the instal‐ lation instructions that are included with the child restraint system.
Detecting risks, avoiding danger
Securing systems for child restraint systems in the vehicle
Only use the following securing systems for child restraint systems:
R
the vehicle's seat belt system
A booster seat may be necessary to achieve proper seat belt positioning for children over 40 lbs (18 kg) in weight or until they reach a height where a three-point seat belt can be installed properly without a booster seat.
Mercedes-Benz recommends a suitable child booster seat with a backrest and seat belt guide.
Advantage of a rearward-facing child restraint system
It is preferable to transport a baby or a small child in a suitable rearward-facing child restraint system. In this case, the child sits in the oppo‐ site direction to the direction of travel and faces backwards.
Babies and small children have comparatively weak neck muscles in relation to the size and weight of their head. The risk of injury to the cer‐ vical spine during an accident can be reduced in a rearward-facing child restraint system.
Always secure a child restraint system cor‐ rectly
&
WARNING Risk of injury or death caused by incorrect installation of the child restraint system
If the child restraint system is incorrectly installed on a suitable seating position, it cannot perform its intended protective func‐ tion.
The child cannot be restrained in the event of an accident, heavy braking or a sudden change of direction.
#
Always comply with the manufacturer's installation instructions for the child restraint system and its correct use.
#
Make sure that the entire base of the child restraint system always rests on the sitting surface of the seat.
#
Never place objects under or behind the child restraint system, e.g. cush‐ ions.
#
Always use child restraint systems with the original cover designed for them.
#
Always replace damaged covers with genuine covers.
&
WARNING Risk of injury or death from unsecured child restraint systems in the vehicle
If the child restraint system is not correctly installed or secured, it could release in the
Occupant safety
45
event of an accident, sudden braking or a sudden change in direction.
The child restraint system could be flung around and hit vehicle occupants.
#
Always install child restraint systems correctly, even when not in use.
#
Always comply with the child restraint system manufacturer's installation instructions.
R
Always observe the child restraint system manufacturer's installation and operating instructions as well as the vehicle-specific information:
-
Secure the child restraint system with the seat belt on the front passenger seat (/ page 50). Observe the specific instructions for the rearward-facing and forward-facing child restraint systems (/ page 49).
If the front passenger seat is occupied, ensure, both before and during the jour‐ ney, that the status of the front
passenger airbag is correct for the cur‐ rent situation (/ page 41 ).
R
Observe the warning labels in the vehicle interior and on the child restraint system.
Do not modify the child restraint system
&
WARNING Risk of injury due to modifi‐ cations to the child restraint system
The child restraint system may no longer function as it is supposed to if you make modifications or attach objects to it, e.g. toys or unsuitable accessories. This poses an increased risk of injury!
Never modify the child restraint system. Only attach accessories which the manufacturer of the child restraint system has authorized especially for this child restraint system.
Only use child restraint systems which are in proper working condition
&
WARNING Risk of injury or death caused by the use of damaged child restraint systems
Child restraint systems or their retaining sys‐ tems that have been subjected to a load in an accident may then not be able to perform their intended protective function.
The child cannot be restrained in the event of an accident, heavy braking or a sudden change of direction.
#
Always replace child restraint systems immediately that have been damaged or involved in an accident.
#
Have the securing systems for the child restraint systems checked at a qualified specialist workshop before installing a child restraint system again.
46
Occupant safety
Avoid direct sunlight
&
WARNING Risk of burns when the child seat is exposed to direct sunlight
If the child restraint system is exposed to direct sunlight or heat, parts could heat up.
Children could suffer burns from these parts, particularly on metallic parts of the child restraint system.
#
Always make sure that the child restraint system is not exposed to direct sunlight.
#
Protect it with a blanket, for example.
#
If the child restraint system has been exposed to direct sunlight, allow it to cool before securing a child into it.
#
Never leave children unattended in the vehicle.
Observe when stopping or parking
&
WARNING Risk of accident and injury due to children left unattended in the vehicle
If children are left unattended in the vehicle, they could:
R
Open doors, thereby endangering other persons or road users.
R
Get out and be struck by oncoming traf‐ fic.
R
Operate vehicle equipment and become trapped, for example.
In addition, the children could also set the vehicle in motion, for example by:
R
Releasing the parking brake.
R
Changing the transmission position.
R
Starting the vehicle.
#
Never leave children unattended in the vehicle.
#
When leaving the vehicle, always take the key with you and lock the vehicle.
#
Keep the vehicle key out of reach of children.
&
WARNING Risk of fatal injury due to exposure to extreme heat or cold in the vehicle
If people – particularly children – are exposed to extreme temperatures over an extended period of time, there is a risk of serious or even fatal injury.
#
Never leave anyone – particularly chil‐ dren – unattended in the vehicle.
#
Never leave animals in the vehicle unat‐ tended.
Occupant safety
47
Overview of suitable seats in the vehicle for installing a child restraint system
Securing systems for child restraint systems
Vehicle seat
Front passenger seat
Securing system:
R
Vehicle seat belt .
Be sure to observe:
R
If the front passenger seat is occupied, ensure, both before and during the journey, that the sta‐ tus of the front passenger airbag is correct for the current situation (/ page 41 ).
R
Notes on automatic front passenger airbag shut‐ off (/ page 39).
Activating/deactivating the seat belt's child special seat belt retractor
&
WARNING Risk of injury or death if a seat belt is unfastened while the vehicle is in motion
If the seat belt is released while the vehicle is in motion, the child restraint system is no longer correctly secured. The child seat safety feature is deactivated and the seat belt is drawn in a bit by the inertia reel.
It is therefore not possible to engage the seat belt again.
#
Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions.
#
Activate the child seat safety feature again and correctly secure the child restraint system.
When enabled, the special seat belt retractor ensures that the seat belt of the front passenger seat does not slacken once the child restraint system is secured.
The seat belt on the front passenger side is equipped with a special seat belt retractor.
#
To install a child restraint system: when installing a child restraint system, always observe the manufacturer's installation and operating instructions as well as the informa‐ tion in this Operator's Manual.
48
Occupant safety
#
Pull the seat belt smoothly from the seat belt outlet.
#
Engage the seat belt tongue in the seat belt buckle.
#
To activate the special seat belt retrac‐ tor: pull the seat belt out fully and let the
inertia reel retract it again. When the special seat belt retractor is activa‐ ted, you should hear a ratcheting sound.
#
Push the child restraint system down until the seat belt sits tightly.
#
To deactivate the special seat belt retrac‐ tor: press the release button of the seat belt
buckle.
#
Hold the seat belt tongue and guide back to the seat belt outlet.
Securing the child restraint system with the seat belt
Notes on rearward-facing and forward-facing child restraint systems on the front passenger seat
&
WARNING Risk of injury or death from using a rearward-facing child restraint system when the front passenger front airbag is enabled
If you secure a child in a rearward-facing child restraint system on the front passenger seat and the PASSENGER AIR BAG OFF indi‐ cator lamp is off, the front passenger airbag can deploy in the event of an accident.
The child could be struck by the airbag. Always ensure that the front passenger air‐
bag is deactivated. The PA SSENGER AIR BAG OFF indicator lamp must be lit.
NEVER use a rearward-facing child restraint system on a seat protected by an ENABLED FRONT AIRBAG in front of it, DEATH or SERI‐ OUS INJURY to the CHILD can occur.
Observe the specific instructions for the rear‐ ward-facing and forward-facing child restraint systems (/ page 50).
Always observe the status of the front passenger airbag on the PASSENGER AIR BAG OFF indica‐ tor lamp:
R
When using a rearward-facing child restraint system on the front passenger seat, the front passenger airbag must always be disabled. This is only the case if the PASSENGER AIR BAG OFF indicator lamp is lit continuously (/ page 41 ).
R
If the PASSENGER AIR BAG OFF indicator lamp is off, the front passenger airbag is ena‐ bled. The front passenger airbag may deploy during an accident.
Occupant safety
49
Securing the child restraint system with the seat belt on the front passenger seat
When installing a belt-secured child restraint system on the front passenger seat, always observe the following:
O
Observe the child restraint system manufac‐ turer's installation and operating instruc‐ tions.
O
The backrest of the forward-facing child restraint system must lie as flat as possible against the backrest of the front-passenger seat.
O
For certain child restraint systems in weight category II or III, there may be restrictions on the maximum size setting, e.g. due to possible contact with the roof.
O
The child restraint system must not be ten‐ sioned between the roof and the seat cush‐ ion and/or be installed facing the wrong direction.
O
The child restraint system must not be put under strain by the head restraints. Adjust the head restraints accordingly.
O
Never place objects under or behind the child restraint system, e.g. cushions.
The seat belt on the front passenger side is equipped with a special seat belt retractor.
When enabled, the special seat belt retractor function ensures that the seat belt does not slacken once the child restraint system is secured (/ page 48).
#
Set the front passenger seat as far back as possible and move the seat into the highest position if possible.
#
Set the seat backrest to the most vertical position possible.
#
Install the child restraint system. The entire base of the child restraint system must always rest on the seat cushion of the front-passenger seat.
#
Always make sure that the shoulder belt strap is correctly routed from the seat belt
outlet of the vehicle to the shoulder belt guide on the child restraint system. The shoulder belt strap must be routed for‐ wards and downwards from the seat belt out‐ let.
#
If necessary, adjust the front passenger seat accordingly.
Notes on pets in the vehicle
&
WARNING Risk of accident and injury due to animals left unsecured or unat‐ tended in the vehicle
If you leave animals in the vehicle unatten‐ ded or unsecured, they could possibly press down buttons or switches.
Thereby an animal may:
R
activate vehicle equipment and become trapped, for example
R
switch systems on or off and endanger other road users
50
Occupant safety
Unsecured animals may be thrown around in the vehicle in the event of an accident or sudden steering and braking maneuver and injure vehicle occupants in the process.
#
Never leave animals in the vehicle unat‐ tended.
#
Always correctly secure animals while driving, for example using a suitable animal carrier.
Occupant safety
51
SmartKey
Overview of SmartKey functions
&
WARNING Risk of accident and injury due to children left unattended in the vehicle
If children are left unattended in the vehicle, they could:
R
Open doors, thereby endangering other persons or road users.
R
Get out and be struck by oncoming traf‐ fic.
R
Operate vehicle equipment and become trapped, for example.
In addition, the children could also set the vehicle in motion, for example by:
R
Releasing the parking brake.
R
Changing the transmission position.
R
Starting the vehicle.
#
Never leave children unattended in the vehicle.
#
When leaving the vehicle, always take the key with you and lock the vehicle.
#
Keep the vehicle key out of reach of children.
*
NOTE Damage to the key caused by magnetic fields
#
Keep the key away from strong mag‐ netic fields.
1
Panic alarm
2
Locks
3
Opening the tailgate
4
Unlocks
5
Battery check lamp
%
The SmartKey may vary from the one shown in the diagram, depending on the vehicle equipment.
The SmartKey locks and unlocks the following components:
R
the doors
R
the tailgate
R
the fuel filler flap
If the vehicle is not opened within approximately 40 seconds after unlocking, it locks again. Anti­theft protection is armed again.
Do not keep the SmartKey together with elec‐ tronic devices or metal objects. This can affect the SmartKey's functionality.
%
If battery check lamp 5 does not light up after pressing the % or & button, the battery has been discharged.
Change the SmartKey battery (/
page 54).
52
Opening and closing
Activating/deactivating the acoustic locking verification signal
Multimedia system:
4
Vehicle5î Vehicle Settings
5
Acoustic Lock
#
Activate O or deactivate ª the function.
Activating/deactivating the panic alarm
Requirements:
R
The ignition is switched off.
%
The panic alarm function is only available in certain countries.
#
To activate: press button 1 for approx‐ imately one second. A visual and audible alarm is triggered.
#
To deactivate: briefly press button 1 again.
or
#
Press the start/stop button on the cockpit (the SmartKey is inside the vehicle).
Changing the unlocking settings
Possible unlocking functions of the SmartKey:
R
Central unlocking
R
Unlocking the driver's door and fuel filler flap
#
To switch between settings: press the
Ü and ß buttons simultaneously for approximately six seconds until the battery check lamp flashes twice.
Options if the unlocking function for the driver's door and fuel filler flap has been selected:
R
Pressing the Ü button a second time cen‐ trally unlocks the vehicle
R
Vehicles with KEYLESS-GO: if you touch the inner surface of the door handle on the
driver's door, only the driver's door and fuel filler flap are unlocked.
Deactivating the SmartKey functions
If you do not use the vehicle or a SmartKey for an extended period of time, you can reduce the energy consumption of the respective SmartKey. To do so, deactivate the SmartKey functions.
#
To deactivate: press the & button on the SmartKey twice in quick succession. The battery check lamp of the SmartKey flashes twice briefly and lights up once.
#
To activate: press any button on the Smart‐ Key.
%
When the vehicle is started with the Smart‐ Key in the marked space of the center con‐ sole, the SmartKey functions are automati‐ cally activated (/ page 104).
Opening and closing
53
Removing/inserting the emergency key
#
To remove: push release catch 1 in the direction of the arrow and simultaneously pull emergency key 2 completely out of the SmartKey.
#
To insert: push emergency key 2 fully into the SmartKey until it engages. Release catch 1 must then be back in the basic position.
Replacing the SmartKey battery
&
DANGER Serious damage to health caused by swallowing batteries
Batteries contain toxic and corrosive sub‐ stances. Swallowing batteries may cause serious damage to health.
There is a risk of fatal injury.
#
Keep batteries out of the reach of chil‐ dren.
#
If batteries are swallowed, seek medical attention immediately.
+
ENVIRONMENTAL NOTE Environmental damage caused by improper disposal of batteries
Batteries contain pollutants. It is illegal to dispose of them with the household rubbish.
#
Dispose of batteries in an environmentally responsible manner. Take discharged batteries to a qualified specialist workshop or to a collection point for used batteries.
Requirements
R
You require a CR 2025 3 V cell battery.
Mercedes-Benz recommends that you have the battery replaced at a qualified specialist work‐ shop.
#
Remove the emergency key (/ page 54).
54
Opening and closing
#
Press emergency key 2 into the opening in the SmartKey in the direction of the arrow until battery compartment cover 1 opens. When doing so, do not hold battery compart‐ ment cover 1 shut.
#
Remove battery compartment cover 1.
#
Repeatedly tap the SmartKey against your palm until battery 3 falls out of the Smart‐ Key.
#
Insert the new battery with the positive pole facing upwards. Use a lint-free cloth to do so.
#
Make sure that the surface of the battery is free of lint, grease and other impurities.
#
Insert the front tabs of battery compartment cover 1 into the housing and then press to close it.
#
Insert emergency key 2 into the SmartKey.
Opening and closing
55
Problems with the SmartKey
Problem
Possible causes/consequences and MM Solutions
You can no longer lock or unlock the vehicle.
Possible causes are:
R
The SmartKey battery is discharged or nearly discharged.
R
There is interference from a powerful radio signal source.
R
The SmartKey is defective.
#
Check the battery using the battery check lamp and replace if necessary (/ page 54).
#
Use the emergency key to lock or unlock (/ page 54).
#
Have the SmartKey checked at a qualified specialist workshop.
You have lost a SmartKey.
#
Have the SmartKey deactivated at a qualified specialist workshop.
#
If necessary, have the mechanical lock changed as well.
56
Opening and closing
Doors
Unlocking and opening doors from the inside
#
Pull door handle 2. Locking pin 1 pops up when the door is unlocked.
Centrally locking and unlocking the vehicle from the inside
#
To unlock: press button 1.
#
To lock: press button 2.
This does not lock or unlock the fuel filler flap.
The vehicle is not unlocked:
R
If you have locked the vehicle using the SmartKey.
R
If you have locked the vehicle using KEY‐ LESS-GO.
Locking/unlocking the vehicle with KEY‐ LESS-GO
Requirements:
R
The SmartKey is outside the vehicle.
R
The distance between the SmartKey and the vehicle does not exceed 3 ft (1 m).
R
The driver's door and the door at which the door handle is used are closed.
Opening and closing
57
#
To unlock the vehicle: touch the inner sur‐ face of the door handle.
#
To lock the vehicle: touch sensor surface
1 or 2.
#
Convenience closing: touch recessed sen‐ sor surface 2 until the closing process has been completed.
%
Further information on convenience closing (/ page 65).
If you open the tailgate from outside it is auto‐ matically unlocked.
58
Opening and closing
Problems with KEYLESS-GO
Problem
Possible causes/consequences and MM Solutions
You can no longer lock or unlock the vehicle using KEYLESS-GO.
Possible causes are:
R
The key functions have been deactivated (/ page 53).
R
The SmartKey battery is discharged or nearly discharged.
R
There is interference from a powerful radio signal source.
R
The SmartKey is faulty.
#
Activate the SmartKey functions (/ page 53).
#
Check the battery using the battery check lamp and replace if necessary (/ page 54).
#
Use the emergency key to unlock or lock the vehicle (/ page 54).
#
Have the vehicle and SmartKey checked at a qualified specialist workshop.
Activating/deactivating the automatic lock‐ ing feature
The vehicle is locked automatically when the ignition is switched on and the wheels are turn‐ ing faster than walking pace.
Opening and closing
59
#
To activate: press and hold button 2 for approximately five seconds until an acoustic signal sounds.
#
To deactivate: press and hold button 1 for approximately five seconds until an acoustic signal sounds.
In the following situations, there is a danger of being locked out when the function is activated:
R
While the vehicle is being tow started/ pushed.
R
If the vehicle is being tested on a roller dyna‐ mometer.
Locking/unlocking the driver's door with the emergency key
%
If you wish to lock the vehicle entirely using the emergency key, first press the button for locking from the inside while the driver's door is open. Then proceed to lock the driv‐ er's door using the emergency key.
#
Insert the emergency key as far as it will go into opening 1 in the cover.
#
Pull and hold the door handle.
#
Pull the cover on the emergency key as straight as possible away from the vehicle until it releases.
#
Release the door handle.
60
Opening and closing
#
To unlock: turn the emergency key counter­clockwise to position 1.
#
To lock: turn the emergency key clockwise to position 1.
#
Carefully press the cover onto the lock cylin‐ der until it engages and is seated firmly.
Cargo compartment
Opening the tailgate
&
DANGER Risk of exhaust gas poisoning
Combustion engines emit poisonous exhaust gases such as carbon monoxide. Exhaust gases can enter the vehicle interior if the tail‐ gate is open when the engine is running, especially if the vehicle is in motion.
#
Always switch off the engine before opening the tailgate.
#
Never drive with the tailgate open.
*
NOTE Damage to the tailgate caused by obstacles above the vehicle
The tailgate swings rearwards and upwards when it is opened.
#
Make sure that there is sufficient space behind and above the tailgate.
You have the following options for opening the tailgate:
#
Vehicles with HANDS-FREE ACCESS: Make a kicking movement with your foot below the bumper (/ page 62).
#
Press the remote operating switch for tail‐ gate 1.
#
Press the p button on the SmartKey. The tailgate will open slightly.
Opening and closing
61
Closing the tailgate
&
WARNING Risk of injury from unsecured items in the vehicle
If objects, luggage or loads are not secured or not secured sufficiently, they could slip, tip over or be thrown around and thereby hit vehicle occupants.
There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction.
#
Always stow objects in such a way that they cannot be thrown around.
#
Before the journey, secure objects, lug‐ gage or loads against slipping or tipping over.
Observe the notes on loading the vehicle.
To close the tailgate, the following options are available:
#
Pull the tailgate down using the handle recess and push it closed.
HANDS-FREE ACCESS function
With HANDS-FREE ACCESS you can open the tailgate by performing a kicking movement under the bumper.
Observe the notes when opening (/ page 61 ) the tailgate.
&
WARNING Risk of burns caused by a hot exhaust system
The vehicle exhaust system can become very hot. If you use HANDS-FREE ACCESS, you could burn yourself by touching the exhaust system.
#
Always ensure that you only make a kicking movement within the detection range of the sensors.
*
NOTE Vehicle damage due to uninten‐ tional opening of the tailgate
R
when using an automatic car wash
R
when using a high pressure cleaner
#
Deactivate KEYLESS-GO or make sure that the key located is at least 10 ft (3 m) away from the vehicle in such sit‐ uations.
When making the kicking movement, make sure that your feet are firmly on the ground, other‐ wise you could lose your balance, e.g. on ice.
62
Opening and closing
Observe the following notes:
R
The SmartKey is behind the vehicle.
R
Stand at least 12 in (30 cm) away from the vehicle while performing the kicking move‐ ment.
R
Do not come into contact with the bumper while making the kicking movement.
R
Do not carry out the kicking movement too slowly.
R
The kicking movement must be towards the vehicle and back again.
1
Detection range of the sensors
If several consecutive kicking movements are not successful, wait ten seconds.
System limits
The system may be impaired or may not function in the following cases:
R
The area around the sensor is dirty, e.g. due to road salt or snow.
R
The kicking movement is made using a pros‐ thetic leg.
The tailgate could be opened unintentionally in the following situations:
R
If a person's arms or legs are moving in the sensor detection range, e.g. when polishing the vehicle or picking up objects.
R
If objects are moved or placed behind the vehicle, e.g. tensioning straps or luggage.
R
If clamping straps, tarps or other coverings are pulled over the bumper.
R
If a protective mat with a length reaching over the trunk sill down into the detection range of the sensors is used.
R
If the protective mat is not secured correctly.
Deactivate the key functions (/ page 53) or do not carry the SmartKey about your person in such situations.
Releasing the tailgate in an emergency
#
Climb into the cargo compartment from the vehicle interior.
#
Unhook the cargo compartment cover, if nec‐ essary (/ page 82).
#
Remove the warning triangle from the warn‐ ing triangle holder .
#
Press carpet 1 down.
Opening and closing
63
#
Pull the cable behind carpet 1 until the tail‐ gate unlocks.
Side windows
Opening and closing the side windows
&
WARNING Risk of entrapment when opening a side window
When opening a side window, parts of the body could be drawn in or become trapped between the side window and window frame.
#
When opening, make sure that nobody is touching the side window.
#
If someone is trapped, release the but‐ ton immediately or pull it in order to close the side window again.
&
WARNING Risk of becoming trapped when closing a side window
When closing a side window, body parts could be trapped in the closing area in the process.
#
When closing, make sure that no body parts are in the closing area.
#
If someone is trapped, release the but‐ ton immediately or press the button in order to reopen the side window.
&
WARNING Risk of becoming trapped when children operate the side windows
Children could become trapped if they oper‐ ate the side windows, particularly when unat‐ tended.
#
Never leave children unattended in the vehicle.
#
When leaving the vehicle, always take the SmartKey with you and lock the vehicle.
Requirements:
R
The power supply or the ignition is switched on.
1
Closes
2
Opens
The buttons on the driver's door take prece‐ dence.
#
To start automatic operation: press the
W button beyond the point of resistance or pull and release it.
64
Opening and closing
#
To interrupt automatic operation: press or pull the W button again.
When the vehicle is switched off, the side win‐ dows can continue being operated.
Automatic reversing function of the side win‐ dows
If an object blocks a side window during the closing process, the side window opens again automatically. The automatic reversing function is only an aid and is not a substitute for your attentiveness.
#
During the closing process, make sure that no body parts are in the closing area.
&
WARNING Risk of becoming trapped despite there being reversing protection on the side window
The reversing function does not react:
R
To soft, light and thin objects, e.g. fingers
R
During resetting
This means that the reverse function cannot prevent someone from becoming trapped in these situations.
#
When closing, make sure that no body parts are in the closing area.
#
If someone becomes trapped, press the W button to open the side window again.
Convenience opening (ventilating the vehicle before starting a journey)
&
WARNING Risk of entrapment when opening a side window
When opening a side window, parts of the body could be drawn in or become trapped between the side window and window frame.
#
When opening, make sure that nobody is touching the side window.
#
Release the button immediately if somebody becomes trapped.
#
Press and hold the Ü button on the SmartKey.
The following functions are performed:
R
The vehicle is unlocked
R
The side windows are opened.
R
The seat ventilation of the driver's seat is switched on.
#
To interrupt convenience opening: release the Ü button.
#
To continue convenience opening: press and hold the Ü button again.
Convenience closing (closing the vehicle from outside)
&
WARNING Risk of entrapment caused by inadvertent convenience closing
When the convenience closing feature is operating, parts of the body could become trapped in the closing area of the side win‐ dows.
Opening and closing
65
#
Observe the complete closing proce‐ dure when using convenience closing.
#
When closing, make sure that no body parts are in the closing area.
#
Press and hold the ß button on the SmartKey.
The following functions are performed:
R
The vehicle is locked.
R
The side windows are closed.
#
To interrupt convenience closing: release the ß button.
%
Convenience closing can also be operated with KEYLESS-GO (/ page 57).
Problems with the side windows
&
WARNING Risk of becoming trapped or fatally injured if reversing protection is not activated
If you close a side window again immediately after it has been blocked, the side window
will close with increased or maximum force. The reversing feature will then not be active.
Parts of the body could become trapped in the closing area in the process.
#
Make sure that no parts of the body are in the closing area.
#
To stop the closing process, release the button or press the button again to re­open the side window.
Problem
Possible causes/consequences and MM Solutions
A side window cannot be closed and you cannot see the cause.
#
Check to see whether any objects are in the window guide.
#
Adjust the side windows.
Adjusting the side windows
If a side window is obstructed during closing and reopens again immediately:
66
Opening and closing
Problem
Possible causes/consequences and M
M Solutions
#
Immediately after this, pull the corresponding button again until the side window has closed, and hold the button for at least one more second (re-adjustment). The side window is closed without the automatic reversing function.
If the side window is obstructed again and reopens again immediately:
#
Immediately after this, pull the corresponding button again until the side window has closed, and hold the button for at least one more second (follow-up adjustment). The side window is closed without the automatic reversing function.
The side windows cannot be opened or closed using the convenience opening feature.
The SmartKey battery is discharged or nearly discharged.
#
Check the battery using the battery check lamp and replace if necessary (/ page 54).
Opening and closing
67
Roller sun blinds
Operating the panoramic roof's roller sun‐ blind
#
Pull handle 1 on the roller sunblind in the corresponding direction.
Anti-theft protection
Function of the immobilizer
The immobilizer prevents your vehicle from being started without the correct SmartKey.
The immobilizer is automatically activated when the ignition is switched off and deactivated when the ignition is switched on.
When leaving the vehicle, always take the Smart‐ Key with you and lock the vehicle. Anyone can start the engine if a valid SmartKey has been left inside the vehicle.
%
In the event the engine cannot be started (yet the vehicle’s battery is charged), the system is not operational. Contact an authorized Mercedes-Benz Center or call 1-800-FOR-MERCedes (in the USA) or 1-800-387-0100 (in Canada).
ATA (anti-theft alarm system)
Function of the ATA system
If the ATA system is armed, a visual and audible alarm is triggered in the following situations:
R
when a door is opened
R
when the tailgate is opened
R
when the hood is opened
The ATA system is armed automatically after approximately ten seconds in the following situa‐ tions:
R
after locking the vehicle with the SmartKey
R
after locking the vehicle using KEYLESS-GO
Indicator lamp 1 flashes when the ATA system is armed.
68
Opening and closing
The ATA system is deactivated automatically in the following situations:
R
after unlocking the vehicle with the SmartKey
R
after unlocking the vehicle using KEYLESS­GO
R
after starting the vehicle with the SmartKey (/ page 104)
%
When the Mercedes‑Benz emergency call system is active and the alarm stays on for more than 30 seconds, a message is auto‐ matically sent to the Customer Assistance Center (/ page 258).
%
In the case of severe battery discharging, the anti-theft alarm system is automatically deactivated to facilitate the next engine start.
Deactivating the ATA
#
Press the Ü, ß or p button on the SmartKey.
or
#
Start the vehicle with the SmartKey (/ page 104).
Deactivating the alarm using KEYLESS-GO:
#
Grasp the outside door handle with the SmartKey outside the vehicle.
Opening and closing
69
Notes on the correct driver's seat position
&
WARNING Risk of injury from adjusting the vehicle settings while the vehicle is in motion
You could lose control of the vehicle in the following situations:
R
if you adjust the driver's seat, the head restraint, the steering wheel or the mirror while the vehicle is in motion
R
if you fasten your seat belt while the vehi‐ cle is in motion
#
Before starting the engine: adjust the driver's seat, the head restraint, the steering wheel or the mirror and fasten your seat belt.
Ensure the following when adjusting steering wheel 1, seat belt 2 and driver's seat 3:
R
you are sitting as far away from the driver's airbag as possible
R
you are sitting in an upright position
R
your thighs are slightly supported by the seat cushion
R
your legs are not fully extended and you can depress the pedals properly
R
the back of your head is supported at eye level by the center of the head restraint
R
you can hold the steering wheel with your arms slightly bent
R
you can move your legs freely
R
you can see all the displays on the instru‐ ment cluster clearly
R
you have a good overview of the traffic con‐ ditions
R
your seat belt sits snugly against your body and passes across the center of your shoul‐ der and across your hips in the pelvic area
Seats
Adjusting the front seat mechanically
&
WARNING Risk of becoming trapped if the seats are adjusted by children
Children could become trapped if they adjust the seats, particularly when unattended.
70
Seats and stowing
#
When leaving the vehicle, always take the SmartKey with you and lock the vehicle.
#
Never leave children unattended in the vehicle.
&
WARNING Risk of becoming trapped when adjusting the seats
When you adjust a seat, you or other vehicle occupants could become trapped, e.g. on the seat guide rail.
#
When adjusting a seat, make sure that no one has any body parts in the sweep of the seat.
Observe the safety notes on "Airbags" and "Chil‐ dren in the vehicle".
&
WARNING Risk of accident due to the driver's seat not being engaged
If the driver's seat is not engaged, it could move unexpectedly while the vehicle is in motion.
This could cause you to lose control of the vehicle.
#
Always make sure that the driver's seat is engaged before starting the vehicle.
&
WARNING Risk of injury from adjusting the vehicle settings while the vehicle is in motion
You could lose control of the vehicle in the following situations:
R
if you adjust the driver's seat, the head restraint, the steering wheel or the mirror while the vehicle is in motion
R
if you fasten your seat belt while the vehi‐ cle is in motion
#
Before starting the engine: adjust the driver's seat, the head restraint, the steering wheel or the mirror and fasten your seat belt.
&
WARNING Risk of becoming trapped if the seat height is adjusted carelessly
If you adjust the seat height carelessly, you or other vehicle occupants could be trapped and thereby injured.
Children in particular could accidentally press the electrical seat adjustment buttons and become trapped.
#
While moving the seats, make sure that hands or other body parts do not get under the lever assembly of the seat adjustment system.
&
WARNING Risk of injury due to head restraints which are not installed or are adjusted incorrectly
If head restraints are not installed or are adjusted incorrectly, the head restraints can‐ not provide protection as intended.
There is an increased risk of injury in the head and neck area, e.g. in the event of an accident or when braking.
Seats and stowing
71
#
Always drive with the head restraints installed.
#
Before driving off, make sure for every vehicle occupant that the center of the head restraint supports the back of the head at about eye level.
&
WARNING Risk of injury or death due to incorrect seat position
The seat belt does not offer the intended level of protection if you have not moved the seat backrest to an almost vertical position.
When braking or in the event of an accident, you could slide underneath the seat belt and sustain abdominal or neck injuries, for exam‐ ple.
#
Adjust the seat properly before begin‐ ning your journey.
#
Always ensure that the seat backrest is in an almost vertical position and that the shoulder section of your seat belt is routed across the center of your shoul‐ der.
#
To adjust the seat fore-and-aft position:
lift lever 1 and slide the seat into the desired position.
#
Make sure that the seat is engaged.
#
To adjust the seat height: push or pull lever
2 until the desired position has been
reached.
#
To adjust the seat backrest inclination: lift lever 3 and set the seat to the desired angle.
#
Ensure that the seat backrest is engaged.
Adjusting the front seat electrically
1
Seat cushion inclination
2
Seat height
72
Seats and stowing
3
Seat backrest inclination
4
Seat fore-and-aft position
#
Save the settings with the memory function (/ page 79).
Adjusting the 4-way lumbar support
1
Raise
2
Soften
3
Lower
4
Harden
#
Using buttons 1 to 4, adjust the contour of the backrest individually to suit your back.
Adjusting the AMG Performance seat
To adjust the contour of the seat and for improved lateral support, you can adjust the front seats individually.
On the front passenger seat, you can adjust only the seat side bolsters of the seat backrest.
The AMG Performance seat is designed for the standard three-point seat belt. If you install a dif‐ ferent multipoint seat belt, e.g. a sport or racing seat belt, the restraint system cannot provide the intended level of protection.
Seats and stowing
73
#
To adjust the seat side bolsters of the seat cushion: press button 1 (narrower) or
2 (wider).
#
To adjust the seat side bolsters of the seat backrest: press button 3 (narrower)
or 4 (wider).
Head restraints
Adjusting the head restraints
&
WARNING Risk of injury from adjusting the vehicle settings while the vehicle is in motion
You could lose control of the vehicle in the following situations:
R
if you adjust the driver's seat, the head restraint, the steering wheel or the mirror while the vehicle is in motion
R
if you fasten your seat belt while the vehi‐ cle is in motion
#
Before starting the engine: adjust the driver's seat, the head restraint, the steering wheel or the mirror and fasten your seat belt.
&
WARNING Risk of injury due to head restraints which are not installed or are adjusted incorrectly
If head restraints are not installed or are adjusted incorrectly, the head restraints can‐ not provide protection as intended.
There is an increased risk of injury in the head and neck area, e.g. in the event of an accident or when braking.
#
Always drive with the head restraints installed.
#
Before driving off, make sure for every vehicle occupant that the center of the head restraint supports the back of the head at about eye level.
74
Seats and stowing
#
To raise: pull the head restraint up.
#
To lower: push the head restraint down.
Switching the seat heating on/off
&
WARNING Risk of burns due to repeat‐ edly switching on the seat heating
Repeatedly switching on the seat heating can cause the seat cushion and seat backrest padding to become very hot.
The health of persons with limited tempera‐ ture sensitivity or a limited ability to react to
high temperatures may be affected or they may even suffer burn-like injuries.
#
Do not repeatedly switch on the seat heating.
To protect against overheating, the seat heating may be temporarily deactivated after it is switched on repeatedly.
*
NOTE Damage to the seats caused by objects or documents when the seat heating is switched on
When the seat heating is switched on, over‐ heating may occur due to objects or docu‐ ments placed on the seats, e.g. seat cush‐ ions or child seats. This could cause damage to the seat surface.
#
Make sure that no objects or docu‐ ments are on the seats when the seat heating is switched on.
Requirements:
R
The power supply is switched on.
#
To switch on/increase the level: press but‐ ton 1 repeatedly until the desired heating level is set. Depending on the heating level, up to three indicator lamps will light up.
Seats and stowing
75
#
To switch off/reduce the level: press but‐ ton 1 repeatedly until the desired heating level is set. If all indicator lamps are off, the seat heating is switched off.
%
The seat heating will automatically switch down from the three heating levels after 5, 10 and 20 minutes until the seat heating switches off.
Switching the seat ventilation on/off
Requirements:
R
The power supply is switched on.
The seat ventilation is available only for vehicles with AMG Performance seats.
#
To switch on/increase the level: press but‐ ton 1 repeatedly until the desired ventila‐ tion level is set. Depending on the ventilation level, up to three indicator lamps will light up.
#
To switch off/reduce the level: press but‐ ton 1 repeatedly until the desired ventila‐ tion level is set. If all indicator lamps are off, the seat ventila‐ tion is switched off.
Steering wheel
Adjusting the steering wheel mechanically
&
WARNING Risk of injury from adjusting the vehicle settings while the vehicle is in motion
You could lose control of the vehicle in the following situations:
R
if you adjust the driver's seat, the head restraint, the steering wheel or the mirror while the vehicle is in motion
R
if you fasten your seat belt while the vehi‐ cle is in motion
#
Before starting the engine: adjust the driver's seat, the head restraint, the
76
Seats and stowing
steering wheel or the mirror and fasten your seat belt.
&
WARNING Risk of becoming trapped if the seats are adjusted by children
Children could become trapped if they adjust the seats, particularly when unattended.
#
When leaving the vehicle, always take the SmartKey with you and lock the vehicle.
#
Never leave children unattended in the vehicle.
This function is only available for the AMG GT and AMG GT S models.
#
Push release lever 1 down as far as it will go. The steering column is unlocked.
#
Adjust height 2 and distance 3 to the steering wheel.
#
Push release lever 1 up as far as it will go. The steering column is locked.
#
Check and make sure that the steering col‐ umn is locked by moving the steering wheel.
Adjusting the steering wheel electrically
The steering wheel can be adjusted when the power supply is switched off.
1
Adjusts the distance to the steering wheel
2
Adjusts the height
#
Save the settings with the memory function (/ page 79).
Seats and stowing
77
Easy entry and exit feature
Using the easy entry and exit feature
&
WARNING Risk of accident when driving off while adjusting the easy exit feature
‑ If you drive off while the easy entry and exit feature is making adjustments, you could lose control of the vehicle.
#
Always wait until the adjustment proc‐ ess is complete before driving off.
&
WARNING Risk of becoming trapped while adjusting the easy entry and exit feature
When the easy entry and exit feature adjusts the steering wheel, you and other vehicle occupants – particularly children – could become trapped.
#
During the adjustment process of the easy entry and exit feature, make sure that no one has any body parts in the sweep of the steering wheel.
#
Move the adjustment lever of the steer‐ ing wheel if there is a risk of becoming trapped by the steering wheel. The adjustment process is stopped.
&
WARNING Risk of becoming trapped during activation of the easy entry and exit feature by children
If children activate the easy entry and exit feature, they can become trapped, particu‐ larly when unattended.
#
Never leave children unattended in the vehicle.
#
When leaving the vehicle, always take the SmartKey with you and lock the vehicle.
Vehicles with memory function: you can stop the adjustment process by pressing one of the memory function position switches.
If the easy entry and exit feature is active, the steering wheel will move upwards or towards the dashboard when:
R
you switch the ignition off.
R
you open the driver's door.
%
The steering wheel will move upwards and towards the dashboard only if it has not already reached the steering limitation.
The steering wheel will move back to the last drive position when:
R
you close the driver's door with the ignition switched on.
R
you press the start/stop button once.
The last drive position will be stored when:
R
you switch the ignition off.
R
you save the setting with the memory func‐ tion.
If you press one of the memory function position switches, the adjustment process will be stop‐ ped.
78
Seats and stowing
Setting the easy entry and exit feature
Multimedia system:
4
Vehicle5î Vehicle Settings
5
Easy Entry/Exit
#
Activate O or deactivate ª the function.
Operating the memory function
&
WARNING Risk of an accident if the memory function is used while driving
If you use the memory function on the driv‐ er's side while driving, you could lose control of the vehicle as a result of the adjustments being made.
#
Only use the memory function on the driver's side when the vehicle is station‐ ary.
&
WARNING Risk of entrapment when set‐ ting the seat with the memory function
When the memory function adjusts the seat or steering wheel, you and other vehicle occupants – particularly children – could become trapped.
#
During the setting procedure of the memory function, ensure that no body parts are in the sweep of the seat or the steering wheel.
#
If somebody becomes trapped, immedi‐ ately release the memory function posi‐ tion button. The adjustment process is stopped.
&
WARNING Risk of entrapment if the memory function is activated by children
Children could become trapped if they acti‐ vate the memory function, particularly when unattended.
#
Never leave children unattended in the vehicle.
#
When leaving the vehicle, always take the SmartKey with you and lock the vehicle.
The memory function can be used when the igni‐ tion is switched off.
Storing
Seat adjustments for up to three people can be stored and called up using the memory function.
The following systems can be selected:
R
Seat and backrest
R
Driver's side: steering wheel
R
Driver's side: outside mirrors on the driver's and front passenger sides
Seats and stowing
79
#
Set the seat, the steering wheel and the out‐ side mirrors to the desired position.
#
Press memory button M together with one of preset position buttons 1, 2 or 3. An acoustic signal sounds. The settings are stored.
#
To call up: press and hold the relevant pre‐ set position button 1, 2 or 3 until the front
seat, steering wheel and outside mirrors are in the stored position.
Stowage areas
Notes on loading the vehicle
&
DANGER Risk of exhaust gas poisoning
Combustion engines emit poisonous exhaust gases such as carbon monoxide. Exhaust gases can enter the vehicle interior if the tail‐ gate is open when the engine is running, especially if the vehicle is in motion.
#
Always switch off the engine before opening the tailgate.
#
Never drive with the tailgate open.
&
WARNING Risk of injury from unsecured items in the vehicle
If objects, luggage or loads are not secured or not secured sufficiently, they could slip, tip over or be thrown around and thereby hit vehicle occupants.
There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction.
#
Always stow objects in such a way that they cannot be thrown around.
#
Before the journey, secure objects, lug‐ gage or loads against slipping or tipping over.
&
WARNING Risk of injury due to objects being stowed incorrectly
If you do not adequately stow objects in the vehicle interior, they could slip or be tossed around and thereby strike vehicle occupants. In addition, cup holders, open stowage spaces and mobile phone brackets cannot always restrain the objects they contain in the event of an accident.
There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction.
80
Seats and stowing
#
Always stow objects in such a way that they cannot be tossed about in these or similar situations.
#
Always make sure that objects do not project from stowage spaces, parcel nets or stowage nets.
#
Close the lockable stowage spaces before starting a journey.
#
Stow and secure objects that are heavy, hard, pointed, sharp-edged, fragile or too large in the cargo compartment.
&
WARNING Risk of burning from the tail‐ pipe or tailpipe trim
The tailpipe and tailpipe trim can become very hot. If you come into contact with these car parts, you could burn yourself.
#
Always be particularly careful when in the vicinity of the tailpipe and tailpipe trims and supervise children very closely when in this area.
#
Before any contact, allow the car parts to cool down.
The driving characteristics of your vehicle are dependent on the distribution of the load within the vehicle. Yo u should bear the following in mind when loading the vehicle:
R
never exceed the permissible gross mass or the gross axle weight rating for the vehicle (including occupants). The values are speci‐ fied on the vehicle identification plate on the vehicle's B-pillar.
R
position heavy loads as far forwards as possi‐ ble and as low down in the cargo compart‐ ment as possible.
R
the load must not protrude above the upper edge of the seat backrests.
R
always attach the partition net when trans‐ porting objects in the cargo compartment.
R
always place the load behind unoccupied seats if possible.
R
secure the load with sufficiently tear-resist‐ ant and wear-resistant tie downs. Pad sharp edges for protection.
Stowage spaces in the vehicle interior
Overview of the front stowage compart‐ ments
1
Stowage compartment in the doors
2
Stowage compartment beneath the armrest with multimedia connection unit with an SD card slot, two USB connections and the igni‐ tion lock
Depending on the equipment, there is a 12 V socket in the stowage compartment
3
Stowage compartment in the front center console with a USB connection
4
Glove box
Seats and stowing
81
Locking/unlocking the glove box
#
Turn the emergency key a quarter turn clock‐ wise 2 (to lock) or counter-clockwise 1 (to unlock).
Extending/retracting the cargo compart‐ ment cover
&
WARNING Risk of injury or death due to objects being poorly secured
On its own, the cargo compartment cover cannot secure or restrain heavy objects, items of luggage and heavy loads.
You could be hit by an unsecured load during sudden changes in direction, braking or in the event of an accident.
#
Always stow objects in such a way that they cannot be thrown around.
#
Secure objects, luggage or loads against slipping or tipping over, e.g. by using tie-downs, even if you are using the cargo compartment cover.
*
NOTE Damage to the cargo compart‐ ment cover when loading the vehicle
The cargo compartment cover may be dam‐ aged when loading the vehicle.
#
Do not place any objects above the lower edge of the side windows or on the cargo compartment cover.
#
To extend: pull cargo compartment cover back by grab handle 1 and clip it into hold‐ ers 2 on the left and right.
82
Seats and stowing
#
To retract: unhook cargo compartment cover from holders 2 on the left-hand and right-hand side.
#
Guide the cargo compartment cover for‐ wards using grab handle 1 above holders
2 until it is fully retracted.
Attaching/removing the partition net
&
WARNING Risk of injury or death due to objects being poorly secured
On its own, the partition net cannot secure or restrain heavy objects, items of luggage and heavy loads.
You could be hit by an unsecured load during sudden changes in direction, braking or in the event of an accident.
#
Always stow objects in such a way that they cannot be thrown around.
#
Secure objects, luggage or loads against slipping or tipping over, e.g. by using lashing material, even when you are using the partition net.
For safety reasons, always use a partition net when transporting a load.
Damaged partition nets can no longer fulfill their functions and must be replaced. Visit a qualified specialist workshop.
#
To attach and tighten: push the seats as far back as possible.
#
From the vehicle interior, insert hooks 1 into upper holders 2 and turn back by 90°. Upper tensioning hook 3 stretches the par‐ tition net automatically.
#
Attach hooks 4 to lower holders 5.
#
After driving a short distance, check the ten‐ sion of the partition net.
Seats and stowing
83
#
To loosen and detach: turn back hooks 1 by 90° and detach from upper holder 2.
#
Detach hooks 4 from lower holders 5.
Cup holder
Installing the cup holder in or removing it from the center console
&
WARNING ‑ Risk of accident or injury when using the cup holder while the vehicle is moving
The cup holder cannot secure containers while the vehicle is moving.
If you use a cup holder while the vehicle is moving, the container may be flung around and liquids may be spilled. The vehicle occu‐ pants may come into contact with the liquid and if it is hot, they could be scalded. You could be distracted from traffic conditions and you may lose control of the vehicle.
#
Only use the cup holder when the vehi‐ cle is stationary.
#
Only use the cup holder for containers of the right size.
#
Close the container, particularly if the liquid is hot.
&
WARNING Risk of injury due to objects being stowed incorrectly
If you do not adequately stow objects in the vehicle interior, they could slip or be tossed around and thereby strike vehicle occupants. In addition, cup holders, open stowage spaces and mobile phone brackets cannot always restrain the objects they contain in the event of an accident.
There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction.
#
Always stow objects in such a way that they cannot be tossed about in these or similar situations.
#
Always make sure that objects do not project from stowage spaces, parcel nets or stowage nets.
#
Close the lockable stowage spaces before starting a journey.
#
Stow and secure objects that are heavy, hard, pointed, sharp-edged, fragile or too large in the cargo compartment.
Observe the notes on loading the vehicle.
The divider in cup holder 1 can be removed, e.g. to enable use with smaller drinks cans.
#
To remove: pull the divider up and remove it.
#
To install: re-insert the divider and push it down until it engages.
84
Seats and stowing
Ashtray and cigarette lighter
Using the ashtray
*
NOTE Damage to the stowage compart‐ ment under the ashtray due to intense heat
The stowage compartment under the ashtray is not heat resistant and could be damaged if you rest a lit cigarette on it.
#
Make sure that the ashtray is fully engaged.
#
Insert holder 3 into the cup holder on the left or right-hand side.
#
To open: fold lid 1 upwards.
#
To close: press lid 1 downwards.
#
To remove: pull ashtray 2 up and out of holder 3.
#
To insert: place ashtray 2 into holder 3.
%
Remove holder 3 to be able to use the entire cup holder. Store holder 3 and ash‐ tray 2 in a suitable place. Comply with the loading guidelines (/ page 80).
Using the cigarette lighter in the front center console
&
WARNING ‑ Risk of fire and injury from hot cigarette lighter
You can burn yourself if you touch the hot heating element or the socket of the ciga‐ rette lighter.
In addition, flammable materials may ignite if:
R
you drop the hot cigarette lighter
R
a child holds the hot cigarette lighter to objects, for example
#
Always hold the cigarette lighter by the knob.
#
Always make sure that the cigarette lighter is out of reach of children.
Seats and stowing
85
#
Never leave children unattended in the vehicle.
Requirements:
R
The ignition is switched on.
#
Press in cigarette lighter 1. The cigarette lighter will pop out automati‐ cally when the heating element is red-hot.
Sockets
Using the 12 V socket under the armrest
Requirements:
R
Only connect devices up to a maximum of 180 watts (15 A).
#
Lift up socket cap 1.
#
Insert the plug of the device.
The 12 V socket is only available on vehicles with an ashtray and a cigarette lighter in the stowage compartment under the armrest.
Using the 12 V socket in the cargo compart‐ ment
Requirements:
R
Only connect devices up to a maximum of 180 W (15 A).
86
Seats and stowing
#
Lift up cap 1 of the socket and insert the plug of the device.
Installing/removing the floor mats
&
WARNING Risk of accident due to objects in the driver's footwell
Objects in the driver's footwell may impede pedal travel or block a depressed pedal.
This jeopardizes the operating and road safety of the vehicle.
#
Stow all objects in the vehicle securely so that they cannot get into the driver's footwell.
#
Always install the floor mats securely and as prescribed in order to ensure that there is always sufficient room for the pedals.
#
Do not use loose floor mats and do not place floor mats on top of one another.
#
To install: slide the corresponding seat backwards and lay the floor mat in the foot‐ well.
#
Press press-studs 1 onto holders 2.
#
Adjust the corresponding seat.
#
To remove: slide the corresponding seat backwards and pull the floor mat off holders
2.
Seats and stowing
87
#
Remove the floor mat.
88
Seats and stowing
Exterior lighting
Information about lighting systems and your responsibility
The various lighting systems of the vehicle are only aids. The driver of the vehicle is responsible for correct vehicle illumination in accordance with the prevailing light and visibility conditions, legal requirements and traffic situation.
Light switch
Operating the light switch
1
W Left standing light
2
X Right standing light
3
T Parking lights and license plate lamp
4
à Automatic driving lights (preferred light switch position)
5
L Low beam/high beam
6
R Switches the rear fog light on or off
When low beam is activated, the T indicator lamp for the parking lights is deactivated and replaced by the L low beam indicator lamp.
#
Always park your vehicle safely using suffi‐ cient lighting, in accordance with the rele‐ vant legal stipulations.
*
NOTE Battery discharging by operating the standing lights
Operating the standing lights over a period of hours puts a strain on the battery.
#
Where possible, switch on the right X or left W parking light.
In the case of severe battery discharging, the standing lights or parking lights are automati‐ cally switched off to facilitate the next engine start.
The exterior lighting (except standing and park‐ ing lights) switches off automatically when the driver's door is opened.
Light and visibility
89
R
Observe the notes on surround lighting (/ page 93).
Automatic driving lights function
The parking lights, low beam and daytime run‐ ning lamps are switched on automatically depending on the ignition status and the ambi‐ ent light.
&
WARNING Risk of accident when the low beam is switched off in poor visibility
When the light switch is set to Ã, the low beam may not be switched on automatically if there is fog, snow or other causes of poor visibility such as spray.
#
In such cases, turn the light switch to L.
The automatic driving lights are only an aid. You are responsible for vehicle lighting.
Switching the rear fog lights on or off Requirements:
R
The light switch is in the L or à posi‐ tion.
#
Press the R button.
Please observe the country-specific laws on the use of rear fog lamps.
Operating the combination switch for the lights
1
High-beam headlamps
2
Turn signal indicator, right
3
High-beam flasher
4
Turn signal indicator, left
#
Use the combination switch to activate the desired function.
90
Light and visibility
High-beam headlamps
#
To switch on: turn the light switch to the
L or à position.
#
Press the combination switch beyond the point of resistance in the direction of arrow
1.
When the high beam is activated, the L indicator lamp for low beam is deactivated and replaced by the K indicator lamp for the high beam.
#
To switch off: move the combination switch back to its starting position.
High-beam flasher
#
Pull the combination switch in the direction of arrow 3.
Turn signal lights
#
To indicate briefly: press the combination switch briefly to the point of resistance in the direction of arrow 2 or 4. The corresponding turn signal indicator will flash three times.
#
To indicate permanently: press the combi‐ nation switch beyond the point of resistance in the direction of arrow 2 or 4.
Activating/deactivating the hazard warning lamps
#
Press button 1 .
The hazard warning lamps will switch on auto‐ matically if:
R
the airbag has been deployed.
Adaptive Highbeam Assist
Adaptive Highbeam Assist function
&
WARNING Risk of accident despite Adaptive Highbeam Assist
Adaptive Highbeam Assist does not recog‐ nize the following road users:
R
Road users without lights, e.g. pedes‐ trians
R
Road users with poor lighting, e.g. cyclists
R
Road users whose lighting is obstructed, e.g. by a barrier
On very rare occasions, Adaptive Highbeam Assist may fail to recognize other road users with their own lighting, or may recognize them too late.
Light and visibility
91
In these or similar situations, the automatic high beam is not deactivated or is activated despite the presence of other road users.
#
Always observe the traffic carefully and switch off the high beam in good time.
Adaptive Highbeam Assist cannot take into account road, weather or traffic conditions.
Detection may be restricted in the following cases:
R
In poor visibility, e.g. fog, heavy rain or snow
R
If there is dirt on the sensors or the sensors are obscured
Adaptive Highbeam Assist is only an aid. You are responsible for adjusting the vehicle's lighting to the prevailing light, visibility and traffic condi‐ tions.
%
Adaptive Highbeam Assist is available only in vehicles with LED high performance head‐ lamps.
The Adaptive Highbeam Assist automatically switches between the following types of light:
R
Low-beam headlamps
R
High-beam headlamps
At speeds greater than 19 mph (30 km/h):
R
If no other road users are detected, the high beam will be switched on automatically.
The high beam switches off automatically in the following cases:
R
At speeds below 16 mph (25 km/h).
R
If other road users are detected.
R
If street lighting is sufficient.
At speeds greater than approximately 31 mph (50 km/h):
R
The headlamp range of the low beam is regu‐ lated automatically based on the distance to other road users.
The system's optical sensor is located behind the windshield near the overhead control panel.
Switching Adaptive Highbeam Assist on/off
#
To switch on: turn the light switch to the
à position.
#
Switch on the high beam using the combina‐ tion switch. When the high beam is switched on automat‐ ically in the dark, the _ indicator lamp on the multifunction display comes on.
#
To switch off: switch off the high beam using the combination switch.
92
Light and visibility
Switching the daytime running lamps on/off
Multimedia system:
4
Vehicle5÷ Light Settings
5
Daytime Run. Lights
#
Activate O or deactivate ª the function.
Setting the exterior lighting switch-off delay time
Multimedia system:
4
Vehicle5÷ Light Settings
5
Ext. Light Switch Off
#
Set the switch-off delay time.
Setting the surround lighting
Multimedia system:
4
Vehicle5÷ Light Settings
5
Locator Lighting
#
Activate O or deactivate ª the function.
If the surround lighting is switched on, the exte‐ rior lighting remains lit for 40 seconds after the
vehicle is unlocked. When you start the vehicle, the surround lighting is deactivated and the automatic driving lights are activated.
Interior lighting
Adjusting the interior lighting
1
u Cargo compartment lamp
2
| Automatic interior lighting control
3
p Right reading lamp
4
c Interior lighting
5
p Left reading lamp
#
To switch on or off: press button 1 5 accordingly.
Setting the interior lighting switch-off delay time
Multimedia system:
4
Vehicle5÷ Light Settings
5
Int. Light Switch Off
#
Set the switch-off delay time.
Light and visibility
93
Windshield wiper and windshield washer system
Switching the windshield wipers on/off
1
g Windshield wipers off
2
Ä Intermittent wiping, normal
3
Å Intermittent wiping, frequent
4
° Continuous wiping, slow
5
¯ Continuous wiping, fast
#
Turn the combination switch to the correct position 1 - 5.
#
Single wipe/washing: push the button on the combination switch in the direction of arrow 1.
R
í Single wipe
R
î Wipes with washer fluid
Changing the windshield wiper blades
&
WARNING Risk of becoming trapped if the windshield wipers are switched on while wiper blades are being replaced
If the windshield wipers begin to move while you are changing the wiper blades, you can be trapped by the wiper arm.
#
Always switch off the windshield wipers and the ignition before changing the wiper blades.
Moving the wiper arms to the change posi‐ tion
#
Switch the ignition on and switch off again immediately.
#
Within around 15 seconds, press the î button on the combination switch for approx‐ imately three seconds (/ page 94). The wiper arms will move into the change position.
Removing the wiper blades
#
Fold the wiper arms away from the wind‐ shield.
94
Light and visibility
#
Set the wiper blade at an angle.
#
Pull the wiper blade out of the holder on the wiper arm in the direction of the arrow.
Installing the wiper blades
#
Push the new wiper blade into the holder on the wiper arm against the direction of the arrow.
#
Turn the wiper blade parallel to the wiper arm.
#
Fold the wiper arm onto the windshield.
Mirrors
Operating the outside mirrors
&
WARNING Risk of injury from adjusting the vehicle settings while the vehicle is in motion
You could lose control of the vehicle in the following situations:
R
if you adjust the driver's seat, the head restraint, the steering wheel or the mirror while the vehicle is in motion
R
if you fasten your seat belt while the vehi‐ cle is in motion
#
Before starting the engine: adjust the driver's seat, the head restraint, the steering wheel or the mirror and fasten your seat belt.
&
WARNING Risk of accident due to mis‐ judgment of distances when using the passenger mirror
The outside mirror on the front-passenger side reflects objects on a smaller scale. The objects in view are in fact closer than they appear.
As a result, you may misjudge the distance between you and the road user driving behind you, for example, when changing lanes.
#
Therefore, always look over your shoul‐ der in order to ensure that you are aware of the actual distance between you and the road users driving behind you.
Light and visibility
95
Folding the outside mirrors in/out
#
Briefly press button 2.
Resetting the outside mirrors
%
If the battery has been disconnected or com‐ pletely discharged, the outside mirrors must be reset. Only then will the automatic mirror folding function work properly.
#
Briefly press button 2.
Adjusting the outside mirrors
#
Press button 1 or 3 to select the outside mirror to be adjusted.
#
Press button 4 to adjust the position of the mirror glass.
Engaging the outside mirrors
#
Vehicles without electrically folding out‐ side mirrors: manually move the outside
mirror into the correct position.
#
Vehicles with electrically folding outside mirrors: press and hold button 2.
You will hear a click and the mirror will audi‐ bly engage in position. The outside mirror will now be set to the correct position.
Automatic anti-glare mirrors function
&
WARNING Risk of acid burns and poi‐ soning due to the anti-glare mirror elec‐ trolyte
Electrolyte may escape if the glass in an automatic anti-glare mirror breaks.
The electrolyte is hazardous to health and causes irritation. It must not come into con‐ tact with your skin, eyes, respiratory organs or clothing or be swallowed.
#
If you come into contact with electro‐ lyte, observe the following:
R
Immediately rinse the electrolyte from your skin with water and seek medical attention.
R
If electrolyte comes into contact with your eyes, immediately rinse them thoroughly with clean water and seek medical attention.
R
If the electrolyte is swallowed, immediately rinse your mouth out thoroughly. Do not induce vomiting. Seek medical attention immediately.
R
Immediately change out of clothing which has been contaminated with electrolyte.
R
If an allergic reaction occurs, seek medical attention immediately.
96
Light and visibility
The inside rearview mirror and the outside mir‐ ror on the driver's side will automatically go into anti-glare mode if light from a headlamp hits the sensor on the inside rearview mirror.
System limits
The system will not go into anti-glare mode if:
R
The engine is switched off.
R
Reverse gear is engaged.
R
The interior lighting is switched on.
Front-passenger outside mirror parking posi‐ tion function
The parking position makes parking easier. In the following situations, the front-passenger
outside mirror will swivel downwards in the direction of the rear wheel on the front passeng‐ er's side:
R
The parking position is stored (/ page 97)
R
The front-passenger mirror is selected
R
Reverse gear is engaged
The front-passenger outside mirror will move back to its original position in the following sit‐ uations:
R
You shift the transmission to another trans‐ mission position
R
You are traveling at speeds greater than 9 mph (15 km/h)
R
You press the button for the outside mirror on the driver's side
Storing the parking position of the front­passenger outside mirror using reverse gear
Storing
#
Select the front-passenger outside mirror using button 2.
#
Engage reverse gear.
#
Move the front-passenger outside mirror into the desired parking position using button 1.
Light and visibility
97
Calling up
#
Select the front-passenger outside mirror using button 2.
#
Engage reverse gear. The front-passenger outside mirror will move to the stored parking position.
Activating/deactivating the automatic mirror folding function
Multimedia system:
4
Vehicle5î Vehicle Settings
5
Autom. Mirror Folding
#
Activate O or deactivate ª the function.
Operating the sun visors
Using the single sun visor
#
Glare from the front: fold sun visor 1 down.
#
Glare from the side: swing sun visor 1 to the side.
#
Vehicles with an extendable sun visor: slide sun visor 1 horizontally as required.
98
Light and visibility
Loading...