McIntosh VP-1000 Brochure

VP1000
Video Processor

“ breakthrough, dual-zone video processor for

no compromise video enthusiasts”

The VP1000 is a Dual-Zone Video Processor, Line-Rate Scaler and Video
Switcher all in a single component that can be used with all brands and
types of video displays, including plasma, LCD, DLP and others. The
VP1000 features dual, independent SD/HD video processing and scaling
which enables simultaneous support for two separate video displays
(zones), each using the same or different video sources.

The VP1000 provides independent video adjustments for each display
which are then saved for each input. All inputs on the VP1000 are
assignable and include 4 HDMI, 6 Component Video, 6 S-Video and
6 Composite Video. The VP1000 provides one output for each input type
for each of two video displays (zones). Control either or both zones via
the front panel or IR remote and an RS232 port enables interface with
various other control systems.

The VP1000 first up-converts all incoming video to 1080p then, if
necessary, converts to match the native resolution of the video display.
All scaling is performed entirely within the digital domain which prevents
addition of artifacts.

Combining wide bandwidth (>300mHz) ultra-linear components, an
advanced algorithm that adjusts both positive and negative gamma
for enhanced black level and sophisticated digital edge enhancement
that processes in both horizontal and vertical directions, the VP1000
delivers the highest quality image achievable.

2-Zone Video Switcher

2 Independent SD/HD Scalers

Infrared Remote Control for 2 Zones

22 Inputs, HDMI, Component, Super
and Composite Video Switching

Parallel Composite Video
Matrix Switching

Digital Audio Output from HDMI Sources

Permanent Memory for All System
Calibration Settings

Firmware Upgradeable

RS232 Port

For the Consumer’s Protection: In order to ensure the highest level of customer satisfaction, “new” McIntosh
products may only be purchased over-the-counter or delivered and installed by an Authorized McIntosh Dealer.
McIntosh products that are purchased over the Internet, by phone or mail order are presumed to be “used” and
do not qualify for any McIntosh Warranty. McIntosh does not warrant, in any way, products that are purchased
from anyone who is not an Authorized Dealer or products that have had their serial number altered or defaced.

8.07.VP1000.20K 35009600

McIntosh Laboratory, Inc. 2 Chambers Street, Binghamton, New York 13903-2699

Tel [phone] • US Toll-Free [phone] • Fax: [phone] • www.mcintoshlabs.com

VP1000

Video

Processor

2-ZONE VIDEO SWITCHER

WITH INDEPENDENT SCALERS

Any and all 22 inputs are

available for the main zone

(Zone A, ZA), and the secondary

zone (Zone B, ZB).

TWO SD/HD VIDEO SCALERS

Independent scalers convert

the images to any display’s

native resolutions, with

assignable analog and

digital (HDMI) Inputs.

PARALLEL COMPOSITE VIDEO

MATRIX SWITCHING

Unprocessed composite video

input/outputs can be assigned

to switch in parallel with

scaled video. This allows non-

HDCP SD video from a DVD

player or other source to be

viewed on a local monitor.

COMPANION PRODUCT

The MDLP1 Projector is a

logical companion for the

VP1000. Your Authorized

Dealer can provide additional

information on other McIntosh

product combinations.

ANALOG VIDEO SPECIFICATIONS
SIGNAL SYSTEM

NTSC, PAL

COMPONENT VIDEO
INPUT/OUTPUT LEVEL

Y – 1.0Vp-p (75 OHM)
PB – 0.648Vp-p (75 OHM)
PR – 0.7Vp-p (75 OHM)

COMPONENT VIDEO INPUT/
OUTPUT RESOLUTION

720x480i thru 1920x1080i

COMPONENT VIDEO INPUT
COLOR PROCESSING MODE

YPBPR

COMPONENT VIDEO OUTPUT
COLOR PROCESSING MODE

YPBPR or RGBHV

S-VIDEO INPUT/OUTPUT LEVEL

Y – 1Vp-p (75 OHM);
C – 0.286Vp-p (75 OHM)

S-VIDEO INPUT/
OUTPUT RESOLUTION

720x480i

COMPOSITE VIDEO INPUT/
OUTPUT LEVEL

1Vp-p (75 OHM)

COMPOSITE VIDEO INPUT/
OUTPUT RESOLUTION

720x480i

DIGITAL VIDEO SPECIFICATIONS
SIGNAL SYSTEM AND VERSION

HDMI 1.1

HDMI INPUT/OUTPUT COLOR PROCESSING MODE

YCBCR or RGB

HDMI INPUT RESOLUTION

720x480i thru 1920x1080i*

*The VP1000 will accept a 1920x1080p input
signal for processing and may be selected for
either Zone A or Zone B HDMI Monitor Output
(but not both simultaneously).

HDMI OUTPUT RESOLUTION

720x480i thru 1920x1080p

DIGITAL AUDIO SPECIFICATIONS
DIGITAL OUTPUT

Optical: -15dbm to -21dbm

GENERAL SPECIFICATIONS
POWER REQUIREMENTS

100, 110, 120, 220, 230 and 240 Volts,
50/60Hz at 50 watts.

OVERALL DIMENSION (H x W x D)

6" (15.2cm) x 17-1/2" (44.5cm) x 21" (45.7cm)
including the front panel, knobs and cables

WEIGHT

21.1 pounds (9.59 kg) net, 37.5 pounds (17.05 kg)
in shipping carton