Maytag MDB6701AWS, MDB6701AWQ, MDB6701AWW, MDB6701AWB, MDBH980AWS Dimension Guide

BUILT-IN TALL-TUB DISHWASHER

PRODUCT DIMENSIONS

3"

(7.6 cm)

Preferred

drain area

25"

(63.5 cm)

7"

(17.8 cm)

(7.6 cm)

34" - 35"

(86.4 cm - 89 cm)

5"

(12.7 cm)

5"

(12.7 cm)

3"

Keep back

free of drain

inlet water and

electrical.

24"

(61 cm)

8"

(20.3 cm)

A

Preferred

drain area

INCHES CENTIMETERS

A 25 63.5

B 19-1/2 49.5

C 23-7/8 60.6

D 33-1/2 - 35-1/4 85.1 - 89.5

MODEL SKUs

MDB6701AW
MDB6702AW
MDBH980AW

D

B

C

Style of product may vary from picture

NOTES:

1. Minimum 32” (81.3 cm) drain loop, 1/2” (1.3 cm) inside diameter minimum. Floor drains require a siphon break.

2. Connections preferably located toward left side of dishwasher. Care should be taken to route plumbing away from
motor and blower (if equipped).

3. Electrical and plumbing should meet all local and national codes.

4. Electrical and water supplies should enter cabinet opening on the fl oor, or through the back or side walls, as
shown in the shaded area of the drawing.

5. When installing dishwasher in or near a corner, allow enough room for door to open without interfering with
cabinet drawers or hardware.

Electrical requirements: Adequately wired individual 120V-A/C, 60-Hz approved electrical circuit. Use required fuse
(15 amp) or comparable circuit breaker.

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifi cations without notice.

Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifi cations subject to change without notice.

Ref. Dishwasher-25-MT

08-20-08