Maytag MDB4709PAM, MDB6769PAB, MDB6769PAS, MDB6769PAW, MDB4709PAB Owners Manual

...
0 (0)

DISHWASHER USER INSTRUCTIONS

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING, please visit our website at www.maytag.com for additional information. If you still need assistance, call us at 1-800-688-9900. In Canada, visit our website at www.maytag.ca or call us at 1-800-807-6777.

You will need your model and serial number located near the door on the right-hand or left-hand side of the dishwasher interior.

Table of Contents

 

DISHWASHER SAFETY .............................................................

1

QUICK STEPS ............................................................................

3

DISHWASHER USE....................................................................

3

CYCLE AND OPTION DESCRIPTIONS ....................................

5

DISHWASHER FEEDBACK SECTION......................................

7

DISHWASHER FEATURES........................................................

8

DISHWASHER CARE .................................................................

9

TROUBLESHOOTING ..............................................................

10

WARRANTY ..............................................................................

12

Dishwasher Safety

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

DANGER

WARNING

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

W10438315A

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

Read all instructions before using the dishwasher.

Use the dishwasher only for its intended function.

Use only detergents or rinse agents recommended for use in a dishwasher, and keep them out of the reach of children.

When loading items to be washed:

1)Locate sharp items so that they are not likely to damage the door seal; and

2)Load sharp knives with the handles up to reduce the risk of cut-type injuries.

Do not wash plastic items unless they are marked “dishwasher safe” or the equivalent. For plastic items not so marked, check the manufacturer's recommendations.

Do not touch the heating element during or immediately after use.

Do not operate the dishwasher unless all enclosure panels are properly in place.

Do not tamper with controls.

Do not abuse, sit on, or stand on the door, lid, or dish racks of the dishwasher.

To reduce the risk of injury, do not allow children to play in or on the dishwasher.

Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the dishwasher turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

Remove the door or lid to the washing compartment when removing an old dishwasher from service or discarding it.

SAVE THESE INSTRUCTIONS

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

GROUNDING INSTRUCTIONS

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The dishwasher is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipmentgrounding conductor can result in a risk of electric shock.

Check with a qualified electrician or service representative if you are in doubt whether the dishwasher is properly grounded. Do not modify the plug provided with the dishwasher; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the dishwasher.

SAVE THESE INSTRUCTIONS

WARNING

Tip Over Hazard Do not use dishwasher until completely installed.

Do not push down on open door.

Doing so can result in serious injury or cuts.

2

Maytag MDB4709PAM, MDB6769PAB, MDB6769PAS, MDB6769PAW, MDB4709PAB Owners Manual

 

Quick Steps

Prepare and load

Select a cycle and option (cycles and options vary

1 dishwasher.

3 by model).

Add detergent

4

Start dishwasher.

2 and rinse aid.

 

Dishwasher Use

STEP 1

Prepare and Load the Dishwasher

IMPORTANT: Remove leftover food, bones, toothpicks and other hard items from the dishes. Remove labels from containers before washing.

Upper rack

Lower rack

Alternative Rack Loading.

Upper rack

Lower rack

Make sure nothing keeps spray arm(s) from spinning freely. It is important for the water spray to reach all soiled surfaces.

Make sure that when the dishwasher door is closed no items are blocking the detergent dispenser.

Items should be loaded with soiled surfaces facing down and inward to the spray as shown. This will improve cleaning and drying results.

Avoid overlapping items like bowls or plates that may trap food.

Place plastics, small plates and glasses in the upper rack. Wash only plastic items marked “dishwasher safe.”

To avoid thumping/clattering noises during operation: Load dishes so they do not touch one another. Make sure lightweight load items are secured in the racks.

When loading silverware, always place sharp items pointing down. Mix other items

pointing up and some pointing down.

STEP 2

Add Detergent

NOTE: If you do not plan to run a wash cycle soon, run a rinse cycle. Do not use detergent.

Use automatic dishwasher detergent only. Add powder, liquid or tablet detergent just before starting a cycle.

Fresh automatic

dishwasher

A

 

 

 

detergent results in

Hard Water

Hard Water

better cleaning.

Soft Water

Soft Water

Store tightly closed

B

C

detergent container

 

MAIN WASH

PRE-

in a cool, dry place.

WASH

 

 

For optimum

 

 

performance, tablet

 

 

detergent is

 

 

recommended.

A. Cover latch

 

 

B. Main Wash section

 

C. Pre-Wash section

3

Premeasured Detergents

Many detergents now come in premeasured forms (gel packs, tablets, or powder packs). These forms are suitable for all hardness and soil levels. Always place premeasured detergents in the main compartment and close the lid.

Using dishwasher detergent tablets and packs have been proven better than powder, liquid or gel detergents to reduce filming on your dishes. By using these tablets and packs, over time this will start to reduce or eliminate white film. Also, by using a rinse aid you can minimize repeat buildup of white film.

Powder and Gels

The amount of detergent to use depends on:

How much soil remains on the items - Heavily soiled loads require more detergent.

The hardness of the water - If you use too little in hard water, dishes won't be clean. If you use too much in soft water, glassware will etch.

Soft to Medium Water (0-6 grains per U.S. gallon) [typical water softener water and some city water]

Medium to Hard Water (7-12 grains per U.S. gallon) [well water and some city water]

Depending on your water hardness, fill the Main Wash section of the dispenser as shown. Fill the Pre-Wash section to the level shown, if needed.

NOTE: Fill amounts shown

Hard Water

 

are for standard powdered

 

Soft Water

Hard Water

detergent. Follow instructions

Soft Water

 

on the package when using

Main Wash

Pre-Wash

other dishwasher detergent.

Add Rinse Aid

Your dishwasher is designed to use rinse aid for good drying performance. Without rinse aid your dishes and dishwasher interior will have excessive moisture. The heat dry option will not perform as well without rinse aid.

Rinse aid keeps water from forming droplets that can

 

Full

dry as spots or streaks. They also improve drying by

 

 

 

allowing water to drain off of the dishes after the final

 

 

rinse.

 

 

Rinse aid helps to reduce excess moisture on the

dish racks and interior of your dishwasher.

Add

 

Check the rinse aid indicator. Add rinse aid when indicator drops to “Refill” level.

To add rinse aid, turn the dispenser cap to “Open” and lift off. Pour rinse aid into the opening until the indicator level is at “Full.” Replace the dispenser cap and turn to “Lock.” Make sure cap is fully locked.

USE RINSE AID FOR

Full

BETTER DRYING

 

Lock

 

Open

Add

¹⁄ turn to lock

NOTE: For most water

 

 

conditions, the factory

 

 

setting of 2 will give good

 

fill

results. If you have hard

max

 

water or notice rings or

 

 

spots, try a higher setting.

 

 

Turn the arrow adjuster

 

 

inside the dispenser by either

 

 

using your fingers or

 

 

inserting a flat-blade screwdriver into the center turning.

-

-

6

5

4

 

-

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

2

 

 

 

 

 

 

<![if ! IE]>

<![endif]>1

 

 

 

 

 

-

-

 

 

 

 

 

 

 

 

 

-

-

 

 

 

 

 

 

 

of the arrow and

STEP 3

Select a Cycle (cycles vary by model)

See “Cycle and Option Descriptions” charts in the following section.

Heavier cycles and options affect cycle length. Some cycles and options will take up to 3¹⁄ hours to complete.

Select Options (options vary by model)

See “Cycle and Option Descriptions” charts in the following section.

You can customize your cycles by pressing the options desired and press Start/Resume.

STEP 4

Start or Resume a Cycle

Run hot water at the sink nearest your dishwasher until the water is hot. Turn off water.

Push door firmly closed. The door latches

automatically. Select the wash cycle and options desired and press START/RESUME OR press START/RESUME to repeat the same cycle and options as in the previous wash cycle.

You can add an item anytime before the main wash starts. Open the door slowly and add the item. Close the door firmly. Press the START/RESUME button, the cycle resumes automatically at the point of interruption.

For fully integrated models (controls on top of console)

Select the wash cycle and options desired.

Press the START/RESUME button once and close the door. After a brief pause, the cycle will begin. The door must be closed within 3 seconds after pushing START/RESUME or the lights will flash, and the dishwasher will not begin. Press the START/RESUME button again and shut the door within

3 seconds.

You can add an item anytime before the main wash starts. Open the door slowly and add the item. Press the START/RESUME then close the door.

4

Cycle and Option Descriptions

This information covers several different models. Your dishwasher may not have all of the cycles and options described.

CYCLE SELECTIONS

 

 

 

 

 

CYCLES

SOIL LEVEL

WASH TIME* (MINS.)

WATER

 

 

 

 

 

 

 

 

Typical**

Max

USAGE

 

 

 

 

 

 

 

 

GALLONS

 

 

 

 

 

 

 

 

W/O

 

(Liters)

 

 

 

 

 

 

 

 

Options

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This cycle senses the load size, soil amount, and

Light to Medium

90

150

4.2 (16.1)

 

 

 

 

 

 

toughness of soil. This cycle is optimized to achieve the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

best cleaning with minimal water and energy.

Tough/Baked-On

95

160

7.1 (26.8)

 

 

 

 

 

 

 

Heavy

95

160

7.1 (26.8)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This is the toughest cycle for your toughest food soils.

Tough/Baked-

135

160

12.3 (46.6)

 

 

 

 

 

 

Use for hard-to-clean, heavily soiled pots, pans,

On/Heavy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

casseroles, and regular tableware.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use for hard-to-clean, heavily soiled pots, pans,

Heavy/Baked-On

100

160

7.1 (26.8)

 

 

 

 

 

 

casseroles, and regular tableware.This cycle forces

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

maximum time, water, and heat. During the wash, the

 

 

 

 

 

 

 

 

 

 

wash action will repeatedly pause for several seconds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Senses the soil level and makes adjustments in the

Light

90

150

4.2 (16.1)

 

 

 

 

 

 

water and energy used. The Energy Guide information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is based on this cycle.

Medium

90

150

5.1 (19.1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Heavy

90

150

7.1 (26.8)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use for lightly soiled items.

Light

70

85

4.2 (16.1)

 

 

 

 

 

 

 

For fast results, this cycle will clean your dishes using

Light to Medium

35

55

5.4 (20.6)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

more water and energy. For improved drying, select the

 

 

 

 

 

 

 

 

 

 

 

heated dry option.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use for rinsing dishes, glasses, and silverware that will

All soil levels

20

20

1.9 (7.2)

 

 

 

 

 

 

 

not be washed right away.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Do not use detergent. During the wash, the wash action

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

will repeatedly pause for several seconds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wash times depend on water temperature, heavy soil condition, dish load size and options selected. Adding options will add time to the cycle.

*Adding options will add time to the cycle. See options information section.

**This is the approximate cycle time obtained with 120°F (49°C) hot water available at the dishwasher. Increase in time results from low temperature of the incoming water.

5

OPTION SELECTIONS

 

OPTIONS

DISH LOAD TYPES

DESCRIPTIONS

USE WITH:

ADDED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TIME TO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CYCLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tough food soils

Adds heat and wash time to the cycle

Jetclean® Plus Steam, Normal,

 

30 min.

 

 

 

 

 

 

 

 

 

 

 

 

and Auto Clean

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tough food soils

Increases the target water

Jetclean® Plus Steam, Normal,

 

10 min.

 

 

 

 

 

 

 

 

 

 

 

temperature during the wash portions

and Auto Clean

 

 

 

 

 

 

 

 

 

 

 

 

 

of the cycle. Adds heat, time, and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

water.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

All loads

Use for best drying results in

Jetclean® Plus Steam, Normal,

 

45 min.

 

 

 

 

 

 

 

 

 

 

 

combination with rinse aid. Turn off

Light, Quick Wash and Auto Clean

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

when loads contain plastic

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

dinnerware that may be sensitive to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

higher temperatures.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To sanitize your dishes

Raises the water temperature in the

Jetclean® Plus Steam, Normal,

 

30 min.

 

 

 

 

 

 

 

 

 

 

and glassware

final rinse to approximately 154°F

and Auto Clean

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(68°C). This high temperature rinse

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

sanitizes your dishes and glassware

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in accordance with NSF/ANSI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Standard 184 for Residential

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dishwashers. Certified residential

 

 

 

 

 

 

 

 

 

 

 

 

 

 

dishwashers are not intended for

 

 

 

 

 

 

 

 

 

 

 

 

 

 

licensed food establishments. The

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sanitize option adds heat and time to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the cycle.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

All loads

Delays the start of a cycle up to

All cycles

 

120, 240,

 

 

 

 

 

 

 

 

 

 

 

8 hours.

 

 

480 min.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

All loads

When Control Lock is lit, all buttons

All cycles

 

 

 

 

 

 

 

 

 

 

 

 

are disabled. If you press any pad

 

 

 

 

 

 

 

 

 

 

 

 

 

 

while your dishwasher is locked, the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

light flashes. The door can be opened

 

 

 

 

 

 

 

 

 

 

 

 

 

 

while the controls are locked.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTROLS AND CYCLE STATUS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTROL

PURPOSE

COMMENTS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To start or resume a

If the door is opened during a cycle or the power is interrupted, the START/RESUME

 

 

 

 

 

 

 

 

 

 

wash cycle

indicator flashes. The cycle will not resume until the door is closed and START/RESUME is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pressed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: If the START/RESUME button is located on top of door, push door firmly closed

 

 

 

 

 

 

 

 

 

 

 

within 3 seconds of pressing START/RESUME. If the door is not closed within 3 seconds,

 

 

 

 

 

 

 

 

 

 

 

the start button LED will flash, an audible tone will be heard, and the cycle will not start.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To reset any cycle or

Press CANCEL/DRAIN to reset any control selections made.

 

 

 

 

 

 

 

 

 

 

 

options during

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

selection.

See “Canceling A Cycle” and “Changing A Cycle After Dishwasher Is Started” sections.

 

 

 

 

 

 

 

 

 

 

To cancel a wash

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cycle after it's

 

 

 

 

 

 

 

 

 

 

 

 

 

 

started.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To turn the audible

Press and hold the Hi Temp Wash button for 3 seconds to turn the audible tones on or off.

 

 

 

 

 

 

 

 

 

 

tones on or off.

Only audible tones for confirming button presses can be turned on/off. Important audible

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tones, such as indicating a cycle has been interrupted, cannot be deactivated.

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: Audible tones are not available on all models.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

Dishwasher Feedback Section

CONTROLS AND CYCLE STATUS

CONTROL

PURPOSE

COMMENTS

The Cycle Status Indicator Lights are used to follow the progress of the dishwasher cycle. Located on the front of the dishwasher for front control models, and located on the top of the door for hidden control models.

Clean indicator glows when a cycle is finished.

If you select the Sani Rinse option, when the Sani Rinse cycle is finished, the Sanitized indicator glows. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the cycle. This can happen if the cycle is interrupted, or the water could not be heated to the required temperature.

The Clean and Sanitized lights go off when you open and close the door or press CANCEL.

Canceling A Cycle

1.Open the door slightly to stop the cycle. Wait for the spraying action to stop before completely opening the door.

2.Press CANCEL/DRAIN button once. The Cancel/Drain light will light up.

3.Close the door and the dishwasher starts a drain cycle (if water remains in bottom of dishwasher). Let the dishwasher drain completely. The Cancel/Drain light turns off after 2 minutes.

Changing A Cycle After Dishwasher Is Started

1.You can interrupt a cycle and restart your dishwasher from the beginning using the following procedure.

2.Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely.

3.Check that detergent dispenser cover is still closed. If cover is open, you will need to refill the detergent dispenser before restarting your new cycle.

4.Press CANCEL/DRAIN twice to reset the control.

5.Select new cycles and options.

6.Press START/RESUME.

Adding A Dish After Dishwasher Is Started

1.Check if Add a Dish indicator is lit. (Available on some models. Otherwise, proceed to Step 2.)

2.Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely.

3.Check whether the detergent dispenser cover is still closed. If it is open, the wash cycle has already started and adding a dish is not recommended.

4.If detergent has not yet been used (detergent dispenser cover is closed), you may add a dish.

5.Press START/RESUME.

7

Dishwasher Features

Your Maytag dishwasher may have some or all of these features.

Split & Fit™ Utensil Basket

The split silverware basket can be separated and placed in various locations in the lower rack. Load flatware and utensils into both sections or just one, depending on your load.

To split the basket:

Hold the basket firmly along the sides. Unlock the baskets.

Silverware basket lids:

Use silverware basket lids to provide optimal spacing and best cleaning performance.

Removable Upper Rack

The removable rack allows you to wash larger items such as stock pots, roasters, and cookie sheets in the lower level rack.

IMPORTANT: Remove dishes prior to removing the upper rack from the dishwasher.

To remove the rack (push tab rack stop):

1.Roll the rack ¹⁄ to ¹⁄ of the way out.

2.Remove each plastic push tab rack stop from the end of each track by pushing

inward toward the rack on the ridged area of the rack stop. The rack stop will snap open and can be easily removed by pulling straight out. Be sure to support the track while removing rack stops.

3.Roll the rack all the way out of the track and remove from the dishwasher.

To replace the rack:

Reverse the above steps 1-3 to replace the rack into the dishwasher.

Manual Adjustable 2-Position Top Rack

Cup Clips

The Cup Clips located in the center of the upper rack can be used to hold lightweight plastic items, cooking utensils and knives in place. Clip the item between the tine and the clip.

Cup Shelf

Fold down the extra shelf on the left-hand or right-hand side of the top rack to hold additional cups, stemware, or long items such as utensils and spatulas.

You can raise or lower the top

rack to fit tall

items in either the top or bottom rack. Adjusters are located on each side of the

top rack. Raise

the top rack to accommodate

items up to 9"

(22 cm) in the top rack and 13" (33 cm) in the bottom rack, or lower the top rack to accommodate items up to 11" (28 cm) in both the top and bottom racks.

IMPORTANT: Remove dishes prior to removing the top rack from the dishwasher.

To raise, remove rack and slide lower wheels into the rails as directed in “Removable Top Rack” section.

To lower, remove rack and slide upper wheels into the rails as directed in “Removable Top Rack” section.

8

Dishwasher Care

CLEANING THE DISHWASHER

Cleaning the exterior

Clean the exterior of the dishwasher with a soft, damp cloth and mild detergent. If your dishwasher has a stainless steel exterior, a stainless steel cleaner is recommended - Stainless Steel Cleaner and Polish Part Number 31464.

Cleaning the interior

Clean the interior of the dishwasher, with a paste of powdered dishwasher detergent and water or use liquid dishwasher detergent on a damp sponge to clean the cooled-down interior.

A white vinegar rinse may remove white spots and film. Vinegar is an acid, and using it too often could damage your dishwasher.

Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe measuring cup on the bottom rack. Run the dishwasher through a complete washing cycle using an air-dry or an energy-saving dry option. Do not use detergent. Vinegar will mix with the wash water.

Dishwasher Maintenance Procedure

To help avoid odor or odor-causing residue in your dishwasher, use affresh® dishwasher and disposer cleaner (recommended) once a month as part of routine maintenance. Affresh® dishwasher and disposer cleaner is effective in all dishwasher brands.

IMPORTANT:

Read these instructions and the instructions found on the affresh® product package completely before beginning the cleaning process.

Use foil wrapper or gloves when handling the tablet.

1.Remove all dishware from the dishwasher. Open the dishwasher and place 1 affresh® dishwasher and disposer tablet in the main detergent tray and close the tray. Place another tablet in the prewash tray or simply place 1 tablet in the bottom of the dishwasher. Close the dishwasher. Run the dishwasher on the most aggressive cycle - heavy duty scrub, heated water, etc.

2.Place 1 affresh® dishwasher and disposal tablet into the garbage disposal. Turn on hot water to slow flow. Run the disposal and water for 15 seconds. Turn off disposal and water. Do not flush disposal completely with water. Water from the dishwasher will clean out the disposal. If no garbage disposal, skip this step.

Drain air gap

If you have a drain air gap, check and clean it if the dishwasher isn't draining well.

Storing the Dishwasher

If you will not be using the dishwasher during the summer months, turn off the water and power supply to the dishwasher. In the winter, if the dishwasher could be exposed to near freezing temperatures or is left in a seasonal dwelling such as a second home or vacation home, avoid water damage by having your dishwasher winterized by authorized service personnel.

9

Troubleshooting

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the cost of a service call.

In the U.S.A., www.maytag.com In Canada, www.maytag.ca

PROBLEM

SOLUTION

 

 

DISHWASHER DOES

NOTE: It is normal for the dishwasher to repeatedly pause several times during a cycle.

NOT RUN

If the START/RESUME light is blinking, press START/RESUME and close the door firmly within

 

 

3 seconds.

 

Press and hold HI TEMP WASH for 3 seconds to turn the audible tones on or off.

 

Be sure the door is closed and latched.

 

Be sure you have selected a cycle. (See “Cycles and Options Descriptions.”)

 

Be sure there is power to the dishwasher. A circuit breaker or fuse might have tripped.

 

If lights other than START/RESUME blink and the unit will not run, you will need to call for service.

 

 

DETERGENT REMAINS IN THE

Check for dishware such as cookie sheets, cutting boards, or large containers, etc., that may be

DISPENSER OR

blocking the detergent dispenser from opening properly.

TABLET IS ON BOTTOM

Be sure your detergent is fresh and lump free.

OF TUB

Be sure the cycle has benn completed (green light is on). If it has not been completed, you will need

 

 

to resume the cycle by pressing START/RESUME and closing the door within 3 seconds.

 

 

CYCLE RUNS TOO LONG

NOTES:

 

To use less water and reduce energy consumption you will encounter cycles that typically run

 

for up to 3 hours.

 

A water heater setting of 120°F (49ºC) is best. The dishwasher will delay longer while heating

 

cooler water.

 

Some options will add time to the cycle. (See “Cycles and Options Descriptions” section.) The

 

Heated Dry option adds ½ hour.

 

Try the Quick Wash cycle.

 

Run the hot water at a faucet close to the dishwasher before starting the cycle.

 

 

DISHWASHER NOT DRYING

NOTE: Plastic and items with nonstick surfaces are difficult to dry because they have a porous

 

surface which tends to collect water droplets. Towel drying may be necessary.

 

Use of rinse aid along with the Heated Dry option is needed for proper drying.

 

Proper loading of items can affect drying. (See specific loading instructions within this guide.)

 

Glasses and cups with concave bottoms hold water. This water may spill onto other items when

 

unloading.

 

Unload the bottom rack first.

 

Locate these items on the more slanted side of the rack for improved results.

 

 

WILL NOT FILL

Be sure the water is turned on to the dishwasher.

 

Check that the float is free from obstructions. (See “Parts and Features.”)

 

Check for suds in the dishwasher. If foam or suds are detected, the dishwasher

 

may not operate properly or may not fill with water.

 

 

WATER REMAINS IN THE TUB/

Be sure the cycle has been completed (the green light is on). If the cycle has not been completed,

WILL NOT DRAIN

you will need to resume the cycle by pressing START/RESUME and closing the door within

 

3 seconds.

 

If dishwasher is connected to a food waste disposer, be sure the knockout plug has been removed

 

from the disposer inlet.

 

Check for kinks in the drain hose.

 

Check for food obstructions in the drain or disposer.

 

Check your house fuse or circuit breaker.

 

 

HARD WATER

NOTE: Extremely hard water mineral deposits can cause damage to your dishwasher and make it

(WHITE RESIDUE ON

difficult to achieve good cleaning. A water softener is strongly recommended if your hardness is

DISHWASHER INTERIOR OR

15 grains or more. If a water softener is not installed, the following steps may help:

GLASSWARE)

Use a commercial cleaner designed for dishwashers once per month.

 

 

Always use a rinse aid.

 

Always use a high-quality, fresh detergent.

 

Use a detergent booster/water softener additive designed for dishwashers.

10

PROBLEM

SOLUTION

 

 

ODORS

NOTE: If the dishwasher is not used daily, you can run a rinse cycle with the partial load daily until a

 

full load is ready to run.

 

Run a vinegar rinse through the dishwasher by putting 2 cups (500 mL) of white vinegar in an

 

upright glass measuring cup in the lower rack. Run a normal cycle with the Heated Dry option

 

turned off. Do not use detergent.

 

The dishwasher may not be draining properly, see “WATER REMAINS IN THE TUB/WILL NOT

 

DRAIN” in “Troubleshooting.”

 

 

NOISY

NOTES:

 

Surging sounds can occur periodically throughout the cycle while the dishwasher is draining.

 

Normal water valve hissing may be heard periodically.

 

A normal snap sound may be heard when the detergent dispenser opens during the cycle and

 

when the door is opened at the end of the cycle.

 

Improper installation will affect noise levels.

 

Be sure the filters are properly installed.

 

A thumping sound may be heard if items extend beyond the racks and interfere with the wash arms.

 

Readjust the dishware and resume the cycle.

 

 

FOOD SOILS REMAIN

Be sure the dishwasher is loaded correctly. Improper loading can greatly decrease the washing

ON DISHES

performance (see “Prepare and Load the Dishwasher”).

 

Select the proper cycle and option for the type of soils. The Jetclean®/Jetclean® Plus Steam cycle

 

with the Steam Sanitize option can be used for tougher loads.

 

Be sure the incoming water temperature is at least 120°F (49ºC).

 

Use the proper amount of fresh detergent. More detergent is needed for heavier-soiled loads and

 

hard water conditions.

 

Scrape food from dishes prior to loading (do not prerinse).

 

 

DID NOT SANITIZE

If the sanitized light is blinking, the load is NOT sanitized. The cycle was interrupted in the final

 

rinse, or your water heater is set too low. Set your water heater to 120ºF (49ºC).

 

 

DAMAGE TO DISHWARE

Improper loading can cause dishes to become chipped or damaged. (See specific loading

 

instructions within this guide.)

 

 

BLINKING LIGHTS

If the START/RESUME light is blinking, press START/RESUME and close the door within 3 seconds.

 

If the Clean light or any other lights are blinking and the dishwasher will not run, call for service.

CLOUDY OR SPOTTED DISHWARE (AND HARD WATER SOLUTION)

NOTES:

Liquid rinse aid is necessary for drying and to reduce spotting.

Use the correct amount of detergent.

Confirm that the cloudiness is removable by soaking the item in white vinegar for 5 minutes. If the cloudiness disappears, it is due to hard water. Adjust the amount of detergent and rinse aid. See (“HARD WATER [WHITE RESIDUE ON DISHWASHER INTERIOR OR GLASSWARE]”) in “Troubleshooting.” If it does not come clear, it is due to etching (see below).

Be sure the incoming water temperature is set at 120°F (49ºC).

Try using the Hi Temp and Sani Rinse options.

To remove spotting, run a vinegar rinse through the dishwasher.

 

Wash and rinse the affected dishware and load into dishwasher. Remove all silverware and

 

metal items. Put 2 cups (500 mL) of white vinegar in a glass measuring cup in the lower rack.

 

Run a normal cycle with the Heated Dry option turned off. No detergent is needed.

 

 

ETCHING (PERMANENT

This is an erosion of the surface of the glassware and can be caused by a combination of: water

CLOUDINESS)

that is too hot, from using too much detergent with soft water or by pre-washing. Detergent needs

 

food soil to act upon. If etching has occurred, the glassware is permanently damaged. To avoid

 

further etching, adjust the detergent amount to match the water hardness, stop pre-washing, and

 

use water heating options only when incoming water temperature is below 120°F (49ºC).

 

 

LEAKING WATER

Be sure dishwasher has been installed properly and is level.

 

Suds can cause the dishwasher to overflow. Measure the detergent accurately and use only

 

detergents designed for use in a dishwasher. Less detergent is needed in soft water. Try another

 

brand of detergent if sudsing continues.

 

To avoid rinse aid leaking from the dispenser, be sure the lid is securely attached and avoid

 

overfilling.

 

 

TUB IS DISCOLORED

NOTES:

 

High iron content in the water can discolor the tub.

 

Tomato-based foods can discolor the tub or dishware.

 

A citrus-based cleaner can be used to clean.

 

 

11

MAYTAG® MAJOR APPLIANCE WARRANTY

LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Maytag brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter “Maytag”) will pay for factory specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Maytag designated service company. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in which it was purchased. Outside the 50 United States and Canada, this limited warranty does not apply. Proof of original purchase date is required to obtain service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1.Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair house fuses, or to correct house wiring or plumbing.

2.Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty coverage.

3.Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is contrary to published user or operator instructions and/or installation instructions.

4.Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance with electrical or plumbing codes, or use of consumables or cleaning products not approved by Maytag.

5.Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage results from defects in materials or workmanship and is reported to Maytag within 30 days from the date of purchase.

6.Any food loss due to refrigerator or freezer product failures.

7.Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be repaired in the home and only in-home service is covered by this warranty.

8.Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9.Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an authorized Maytag servicer is not available.

10.The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with published installation instructions.

11.Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty is void if the factory applied serial number has been altered or removed from your major appliance.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. MAYTAG SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

If outside the 50 United States and Canada, contact your authorized Maytag dealer to determine if another warranty applies.

9/07

For additional product information, in the U.S.A., visit www.maytag.com

In Canada, visit www.maytag.ca

If you do not have access to the Internet and you need assistance using your product or you would like to schedule service, you may contact Maytag at the number below.

Have your complete model number ready. You can find your model number and serial number on the label located near the door on the right-hand or left-hand side of the dishwasher interior.

For assistance or service in the U.S.A., call 1-800-688-9900. In Canada, call 1-800-807-6777.

If you need further assistance, you can write to Maytag with any questions or concerns at the address below:

In the U.S.A.:

In Canada:

Maytag Brand Home Appliances

Maytag Brand Home Appliances

Customer eXperience Center

Customer eXperience Centre

553 Benson Road

200 - 6750 Century Ave.

Benton Harbor, MI 49022-2692

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

 

Please keep this User Instructions and model number information for future reference.

W10438315A

© 2012

®Registered trademark/™ Trademark of Maytag Properties, LLC, or its related companies.

3/12

All rights reserved.

All other trademarks are owned by their respective companies.

Printed in U.S.A.

12

INSTRUCCIONES PARA EL USUARIO

DE LA LAVAVAJILLAS

LE AGRADECEMOS la compra de este producto de alta calidad. Si usted experimenta un problema que no se haya cubierto en SOLUCIÓN DE PROBLEMAS, visite nuestro sitio de internet en www.maytag.com para obtener información adicional. Si considera que aún necesita ayuda, llámenos al 1-800-688-9900. En Canadá, visite nuestro sitio de internet en www.maytag.ca o llámenos al 1-800-807-6777.

Necesitará tener a mano el número de modelo y de serie, que está ubicado cerca de la puerta, del lado de recho o izquierdo del interior de la lavavajillas.

Índice

 

SEGURIDAD DE LA LAVAVAJILLAS......................................

13

PASOS RÁPIDOS .....................................................................

15

USO DE LA LAVAVAJILLAS ....................................................

15

DESCRIPCIÓN DE CICLOS Y OPCIONES.............................

17

SECCIÓN DE INFORMACIÓN PROVISTA POR LA

 

LAVAVAJILLAS.........................................................................

20

CARACTERÍSTICAS DE LA LAVAVAJILLAS .........................

21

CUIDADO DE LA LAVAVAJILLAS...........................................

22

SOLUCIÓN DE PROBLEMAS .................................................

23

GARANTÍA ...............................................................................

26

Seguridad de la lavavajillas

Su seguridad y la seguridad de los demás es muy importante.

Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico. Lea y obedezca siempre todos los mensajes de seguridad.

Este es el símbolo de advertencia de seguridad.

Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una lesión a usted y a los demás.

Todos los mensajes de seguridad irán a continuación del símbolo de advertencia de seguridad y de la palabra “PELIGRO” o “ADVERTENCIA”. Estas palabras significan:

PELIGRO

ADVERTENCIA

Si no sigue las instrucciones de inmediato, usted puede morir o sufrir una lesión grave.

Si no sigue las instrucciones, usted puede morir o sufrir una lesión grave.

Todos los mensajes de seguridad le dirán el peligro potencial, le dirán cómo reducir las posibilidades de sufrir una lesión y lo que puede suceder si no se siguen las instrucciones.

13

Loading...
+ 29 hidden pages