Marantz NR1606 Owners Manual

Contents Connections Playback Settings Tips Appendix

AV Surround Receiver

NR1606

Front panel Display Rear panel Remote Index

Owner’s Manual

Contents Connections Playback Settings Tips Appendix

Contents

Accessories

Inserting the batteries Operating range of the remote control unit

Features

High quality sound High performance Easy operation

Part names and functions

Front panel Display Rear panel Remote control unit

Connections

Connecting speakers

Speaker installation Speaker connection Speaker configuration and “Amp Assign” settings

Connecting a TV

Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel)

Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel)

Connection 3 : TV equipped without an HDMI connector

Connecting a playback device

Connecting a set-top box (Satellite tuner/cable TV)

Connecting a DVD player or Blu-ray Disc player

Connecting a video camcorder or game console

Connecting an iPod or USB memory device to the USB port

Connecting an FM/AM antenna

Connecting to a home network (LAN)

13 16 18 22

26 33 37

50 51

Wired LAN Wireless LAN

Connecting an external control device

REMOTE CONTROL jacks DC OUT jack

Connecting the power cord

Playback

Basic operation

Turning the power on Selecting the input source Adjusting the volume Turning off the sound temporarily (Muting) Playback a DVD player/Blu-ray Disc player

53 54 55

56 58 60

60 61

62 63

66 66 67 67 67

Front panel Display Rear panel Remote Index

Contents Connections Playback Settings Tips Appendix

Playing an iPod

Listening to music on an iPod iPod Browse Mode settings Performing repeat playback Performing random playback

Playing a USB memory device

Playing files stored on USB memory devices

Listening to music on a Bluetooth device

Playing music from Bluetooth device Pairing with other Bluetooth devices Reconnecting to this unit from a Bluetooth device

Listening to FM/AM broadcasts

Listening to FM/AM broadcasts Tuning in by entering the frequency (Direct Tune) Changing the tune mode (Tune Mode) Tuning in to stations and presetting them automatically (Auto

Preset Memory) Presetting the current broadcast station (Preset Memory) Listening to preset stations Specify a name for the preset broadcast station (Preset Name) Skipping preset broadcast stations (Preset Skip) Cancelling Preset Skip

Listening to Internet Radio

69 70 72 72

77 79 80

82 83 84

84 85

Listening to Internet Radio Playing the last played Internet Radio station Using vTuner to add Internet Radio stations to favorites

Playing back files stored on a PC and NAS

Applying media sharing settings Playing back files stored on a PC and NAS

Listening to Pandora

Creating a new station Listening to an existing station Listening to created radio stations at random Giving feedback and managing stations Sign Out

Listening to SiriusXM Internet Radio

Listening to SiriusXM Internet Radio Sign Out

85 86 87 88

90 91 92

94 95

98 100 101 101 102 103

104

105 106

Front panel Display Rear panel Remote Index

Contents Connections Playback Settings Tips Appendix

AirPlay function

Playing songs from your iPhone, iPod touch or iPad Playing iTunes music with this unit Selecting multiple speakers (devices) Perform iTunes playback operations with the remote control unit

of this unit

Spotify Connect function

Playing Spotify music with this unit

Convenience functions

Performing repeat playback Performing random playback Registering to Favorites Playing back content added to the “Save to Favorites” Deleting content added to favorites Searching content with keywords (Text Search) Playing back music and a favorite picture at the same time

(Slideshow) Setting the Slideshow Interval Adjusting the volume of each channel to match the input source

(Channel Level Adjust) Adjusting the tone (Tone) Displaying your desired video during audio playback (Video

Select) Adjusting the picture quality for your viewing environment (Picture

Mode) Playing the same music in all zones (All Zone Stereo)

107

108 108 109

109

110

111

112 112 113 113 114 114

115 116

117 118

119

120 121

Selecting a sound mode

Selecting a sound mode Direct playback Pure Direct playback Auto surround playback

HDMI control function

Setting procedure

Smart Menu function Sleep timer function

Using the sleep timer

Smart select function

Calling up the settings Changing the settings

Web control function

Controlling the unit from a web control

Panel lock function

Disabling all key button operations Disabling all button operations except VOLUME Canceling the Panel lock function

Remote lock function

Disabling the sensor function of the remote control unit Enabling the remote sensor function

Playback in ZONE2 (Separate room)

Connecting ZONE2 Playback in ZONE2

122

123 124 124 125

134

135 137

138

139

140 141

142

144

144 144 145

146

146 146

147

147 149

Front panel Display Rear panel Remote Index

Contents Connections Playback Settings Tips Appendix

Settings

Menu map

Menu operations

Inputting characters

Using the keyboard screen

Audio

Dialog Level Adjust Subwoofer Level Adjust Surround Parameter M-DAX Audio Delay Volume Audyssey Graphic EQ

Video

Picture Adjust HDMI Setup Output Settings On Screen Display TV Format

151

154

155

156

157

157 157 158 161 162 162 163 166

168

168 170 175 179 180

Inputs

Input Assign Source Rename Hide Sources Source Level Input Select

Speakers Audyssey® Setup

Procedure for speaker settings (Audyssey® Setup) Error messages Retrieving Audyssey® Setup settings

Manual Setup

Amp Assign Speaker Config. Distances Levels Crossovers Bass Front Speaker

181

181 183 184 184 184

186 186

188 194 195

196

196 197 202 203 204 205 206

Front panel Display Rear panel Remote Index

Contents Connections Playback Settings Tips Appendix

Network

Information Connection Wi-Fi Setup Settings Network Control Friendly Name Diagnostics Maintenance Mode

General

Language ECO ZONE2 Setup Zone Rename Smart Select Names Trigger Out Front Display Firmware Information Usage Data Setup Lock

Limiting the operating zone with the remote control

207

207 207 208 211 213 213 214 215

216

216 216 219 220 220 221 221 222 224 225 226

227

Tips

Tips Troubleshooting

Resetting factory settings

Appendix

About HDMI Video conversion function Playing back a USB memory devices Playing back a Bluetooth device Playing back a file saved on a PC or NAS Playing back Internet Radio Personal memory plus function Last function memory Sound modes and channel output Sound modes and surround parameters Types of input signals, and corresponding sound modes Explanation of terms Trademark information Specifications Index License

229 231

247

248 251 253 254 255 256 256 256 257 258 261 264 273 275 280 283

Front panel Display Rear panel Remote Index

Quick Start Guide Safety Instructions Notes on radio Warranty

(for USA/for CANADA)

Cable labels

Power cord FM indoor antenna

AM loop antenna Sound calibration

microphone

(ACM1HB)

Sound calibration

microphone stand

Remote control unit

(RC024SR)

R03/AAA batteries

Contents Connections Playback Settings Tips Appendix

Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference.

Accessories

Check that the following parts are supplied with the product.

Front panel Display Rear panel Remote Index

R03/AAA batteries

Approx. 23 ft/7 m

30° 30°

Contents

Connections Playback Settings Tips Appendix

Inserting the batteries

Remove the rear lid in the direction of the arrow and

remove it.

Insert two batteries correctly into the battery

compartment as indicated.

Put the rear cover back on.

NOTE

To prevent damage or leakage of battery fluid:

Do not use a new battery together with an old one.

Do not use two different types of batteries.

Remove the batteries from the remote control unit if it will not be in use for long

periods. If the battery fluid should leak, carefully wipe the fluid off the inside of the battery

compartment and insert new batteries.

Operating range of the remote control unit

Point the remote control unit at the remote sensor when operating it.

Front panel Display Rear panel Remote Index

Contents

Features

Connections Playback Settings Tips Appendix

High quality sound

With discrete circuit technology, the power amplifier provides

identical quality for all 7-channels (70 Watts x 7-channels)

For optimum realism and stunning dynamic range, the power amplifier section features discrete power devices (not integrated circuitry). By using high current, high power discrete power devices, the amplifier is able to easily drive high quality speakers.

Dolby Atmos (v

This unit is equipped with a decoder that supports Dolby Atmos audio format. The placement or movement of sound is accurately reproduced by the addition of overhead speakers, enabling you to experience an incredibly natural and realistic surround sound field.

DTS:X

This unit is equipped with the DTS:X decoder technology. DTS:X brings the home theater experience to new heights with its immersive object based audio technology which removes the bounds of channels. The flexibility of objects allows for sound to be scaled large or small and moved around the room with greater accuracy than ever before leading to a richer immersive audio experience.

p. 264)

High performance

4K 60Hz input/output supported

When 4K Ultra HD (High Definition) is used, an input/output speed of 60 frames per second (60p) is achieved for video signals. When connected to 4K Ultra HD and 60p video signal input compatible TV, you can enjoy the sense of realism only available from high-definition images, even when viewing fast-moving video. This unit also supports image processing for 4K 60p, 4:4:4 and 24-bit videos. By processing the video at the original resolution, this unit lets you enjoy flawless, high-definition picture quality.

HDCP 2.2

This unit is compatible with HDCP2.2 copyright protection standard.

Front panel Display Rear panel Remote Index

Up scaling

Up to 1080p

Out

Contents

Connections Playback Settings Tips Appendix

Digital video processor upscales analog video signals (SD

resolution) to HD (720p/1080p) and 4K (v p. 178)

This unit is equipped with a 4K video upscaling function that allows analog video or SD (Standard Definition) video to be output via HDMI at 4K (3840 × 2160 pixels) resolution. This function enables the device to be connected to a TV using a single HDMI cable, and produces high definition images for any video source.

HDMI connections enable connection to various digital AV

devices (8 inputs, 1 output)

This unit is equipped with 8 HDMI inputs and 1 HDMI output enabling connection to various HDMI compatible devices such as Blu-ray Disc players, game consoles and HD video camcorders.

Front panel Display Rear panel Remote Index

Contents

The device is equipped with a AirPlay® function in addition to

Connections Playback Settings Tips Appendix

network functions such as Internet radio etc. (v p. 107)

Wireless connection with Bluetooth devices can be carried out

easily (v

p. 76)

You can enjoy a wide variety of content, including listening to Internet Radio, playing audio files stored on your PC, and displaying photographs stored on your PC on our television.

This unit also supports Apple AirPlay which lets you stream your music library from an iPhone®, iPad®, iPod touch® or iTunes®.

Playback of DSD and FLAC files via USB and networks

This unit supports the playback of high resolution audio formats such as DSD (2.8 MHz) and FLAC 192 kHz files. It provides high quality playback of high resolution files.

Front panel Display Rear panel Remote Index

You can enjoy music simply by connecting wirelessly with your smartphone, tablet, PC, etc.

Compatible with the “Marantz 2015 AVR Remote”z for performing basic operations of the unit with an iPad, iPhone or Android™ devices (Google, Amazon Kindle Fire)

“Marantz 2015 AVR Remote” is application software that allows you to perform basic operations with an iPad, iPhone, Android smartphone or Android tablet such as turning the unit ON/OFF, controlling the volume, and switching the source.

Download the appropriate “Marantz 2015 AVR Remote” for your iOS or Android

devices. This unit needs to be connected to the same LAN or Wi-Fi (wireless LAN) network that the iPhone or iPod touch is connected to.

GMAIN ZONEHGZONE2H

Contents Connections Playback Settings Tips Appendix

Multi-Room audio (v p. 121)

Easy operation

“Setup Assistant” provides easy-to-follow setup instructions

First select the language when prompted. Then simply follow the instructions displayed on the TV screen to set up the speakers, network, etc.

Easy to use Graphical User Interface

This unit is equipped with a Graphical User Interface for improved operability.

You can select and play back the respective inputs in MAIN ZONE and ZONE2. In addition, when the All Zone Stereo function is used, the music being played back in MAIN ZONE can be enjoyed in all the zones at the same time. This is useful when you want to let the BGM propagate throughout the whole house.

Energy-saving design

This unit is equipped with an ECO Mode function that allows you to enjoy music and movies while reducing the power consumption during use, and also an auto-standby function that automatically turns off the power supply when the unit is not in use. This helps reduce unnecessary power use.

Front panel Display Rear panel Remote Index

irt uewqy

Q2Q3Q

Q7Q

Contents

Connections Playback Settings Tips Appendix

Part names and functions

Front panel

Front panel Display Rear panel Remote Index

irt uewqy

Contents Connections Playback Settings Tips Appendix

INPUT SELECTOR knob

p. 66)

Power operation button (X)

Used to turn the power of the MAIN ZONE (room where this unit is located) on/off (standby). (v

Power indicator

p. 66)

This is lit as follows according to the power status:

Off: Power on

Red: Normal standby

Orange:

When “HDMI Control” is set to “On” (v

When “HDMI Pass Through” is set to “On” (v

When “Network Control” is set to “Always On” (v p. 213)

p. 171)

p. 172)

This selects the input source. (v

M-DAX indicator

This lights when the M-DAX mode is selected. (v p. 161)

Remote control sensor

This receives signals from the remote control unit. (v

Display

This displays various pieces of information. (v

PURE DIRECT indicator

This lights when the “Pure Direct” mode is selected as the sound mode.

p. 124)

VOLUME knob

This adjusts the volume level. (v p. 67)

Headphones jack (PHONES)

This is used to connect headphones. When the headphones are plugged into this jack, audio will no longer be output from the connected speakers or from the PRE OUT connectors.

NOTE

To prevent hearing loss, do not raise the volume level excessively when using

headphones.

p. 8)

p. 16)

Front panel Display Rear panel Remote Index

Q0 Q2Q3Q4Q1 Q6Q5 Q7Q8Q9 W0

Contents

SETUP MIC jack

Connections Playback Settings Tips Appendix

This is used to connect the supplied Sound calibration microphone.

p. 189)

M-DAX button

This switches the M-DAX mode. (v p. 161)

ZONE2 ON/OFF button

This turns the power of ZONE2 (separate room) on/off. (v p. 149)

ZONE2 SOURCE button

This selects the input source for ZONE2. (v

INTERNET RADIO button

p. 149)

This switches the input source to “Online Music” – “Internet Radio”. (v

p. 89)

DIMMER button

Each press of this switches the brightness of the display. (v

STATUS button

p. 221)

Each press of this switches the status information that is shown on the display.

SOUND MODE button

Switching the sound mode. (v p. 122)

PURE DIRECT button

This switches the sound mode between Direct, Pure Direct and Auto surround.

“Direct playback” (v

“Pure Direct playback” (v

“Auto surround playback” (v p. 125)

USB port (T)

p. 124)

This is used to connect USB storages (such as USB memory devices) and the USB cable supplied with iPod. (v p. 56)

AUX1-HDMI connector

This is used to connect HDMI output compatible devices such as video camcorders and game consoles. (v

p. 55)

Front panel Display Rear panel Remote Index

iouytrewq

Q1Q

Contents Connections Playback Settings Tips Appendix

Display

Input mode indicators

These light according to the audio input mode settings of each input source. (v p. 184)

Surround back indicator

This lights when audio signals are being output from the surround back speakers. (v p. 199)

Decoder indicators

These light when Dolby or DTS signals are input or when the Dolby or DTS decoder is running.

Audyssey® indicator

This lights when “MultEQ®”, “Dynamic EQ” or “Dynamic Volume” has been set up. (v

p. 163)

Tuner reception mode indicators

These light up according to the reception conditions when the input source is set to “Tuner”.

TUNED: Lights up when the broadcast is properly tuned in. STEREO: Lights up when receiving FM stereo broadcasts.

Sleep timer indicator

This lights when the sleep mode is selected. (v p. 137)

Circle indicator

This is displayed when the input source is “Online Music” or “iPod/USB” when you are playing back music.

Front panel Display Rear panel Remote Index

2Q1

Contents

Volume indicator

MUTE indicator

This blinks while the sound is muted. (v

Information display

The input source name, sound mode, setting values and other information are displayed here.

Input signal indicators

The respective indicator will light corresponding to the input signal. (v

p. 184)

ZONE2 indicator

This lights up when ZONE2 (separate room) power is turned on. (v

p. 149)

Connections Playback Settings Tips Appendix

p. 67)

Front panel Display Rear panel Remote Index

i o Q

e rw

Contents

Rear panel

Connections Playback Settings Tips Appendix

Front panel Display Rear panel Remote Index

e rw

90°

320°

90°

Contents

Rod antennas for Bluetooth/wireless LAN

Connections Playback Settings Tips Appendix

Stand this antenna upright when connecting to a network via wireless LAN, or when connecting to a handheld device via Bluetooth. (v p. 61)

The antenna clip can be removed from the rear panel.

Rotate the antenna clip 90 degrees to the left.

Pull the antenna clip out towards yourself.

The antenna clip is needed when transporting this unit. Keep it in a

safe place. Attach the antenna clip by following the steps for removing it in

reverse.

NETWORK connector

Used to connect to a LAN cable when connecting to a wired LAN network. (v

Digital audio connectors (DIGITAL AUDIO)

p. 60)

Used to connect devices equipped with digital audio connectors.

“Connection 2 : TV equipped with an HDMI connector and

incompatible with the ARC (Audio Return Channel)” (v p. 50) “Connection 3 : TV equipped without an HDMI

connector” (v p. 51) “Connecting a set-top box (Satellite tuner/cable TV)” (v

FLASHER IN jack

p. 53)

Used when using a control BOX or other such control devices to control this unit.

Front panel Display Rear panel Remote Index

io Q

Contents

HDMI connectors

Connections Playback Settings Tips Appendix

Used to connect devices equipped with HDMI connectors.

“Connection 1 : TV equipped with an HDMI connector and

compatible with the ARC (Audio Return Channel)” (v “Connection 2 : TV equipped with an HDMI connector and

incompatible with the ARC (Audio Return Channel)” (v p. 50) “Connecting a set-top box (Satellite tuner/cable TV)” (v

“Connecting a DVD player or Blu-ray Disc player” (v

p. 49)

p. 53)

p. 54)

DC OUT jack

Used to connect devices equipped with the trigger function. (v p. 63)

REMOTE CONTROL jack

Used to connect infrared receivers/transmitters in order to operate this unit and external devices from a different room. (v p. 62)

FM/AM antenna terminals (ANTENNA)

Used to connect FM antennas and AM loop antennas. (v p. 58)

Analog audio connectors (AUDIO)

Used to connect devices equipped with analog audio connectors.

“Connecting a set-top box (Satellite tuner/cable TV)” (v

“Connecting a DVD player or Blu-ray Disc player” (v p. 54)

PRE OUT connectors

p. 53)

Used to connect a subwoofer with built-in amplifier or power amplifier for ZONE2.

“Connecting the subwoofer” (v

“Connection 2 : Connection using an external amplifier” (v

p. 34)

p. 148)

Front panel Display Rear panel Remote Index

Q1Q

Contents Connections Playback Settings Tips Appendix

Component video connectors (COMPONENT VIDEO)

Used to connect devices equipped with component video connectors.

“Connection 3 : TV equipped without an HDMI

connector” (v p. 51) “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 53)

“Connecting a DVD player or Blu-ray Disc player” (v

Speaker terminals (SPEAKERS)

p. 33)

Video connectors (VIDEO)

Used to connect devices equipped with video connectors.

“Connection 3 : TV equipped without an HDMI

connector” (v “Connecting a set-top box (Satellite tuner/cable TV)” (v

“Connecting a DVD player or Blu-ray Disc player” (v p. 54)

p. 51)

p. 53)

Used to connect speakers. (v

AC inlet (AC IN)

Used to connect the power cord. (v p. 64)

NOTE

Do not touch the inner pins of the connectors on the rear panel. Electrostatic

discharge may cause permanent damage to the unit.

p. 54)

Front panel Display Rear panel Remote Index

Contents

Connections Playback Settings Tips Appendix

Remote control unit

ZONE SELECT buttons

These switch the zone (MAIN ZONE, ZONE2) that is operated through the remote control unit.

“Playback in ZONE2” (v

“Menu operations” (v p. 154)

Input source select buttons

These selects the input source.

“Selecting the input source” (v

“Playback in ZONE2” (v p. 149)

Channel/page search buttons (CH/PAGE df)

These select radio stations registered to presets or switch pages.

p. 85)

MUTE button (:)

This mutes the output audio.

“Turning off the sound temporarily (Muting)” (v

“Turning off the sound temporarily (Muting) (ZONE2)” (v

Information button (INFO)

This displays the status information on the TV screen. (v p. 225)

Cursor buttons (uio p)

These select items.

BACK button

This returns to the previous screen.

p. 149)

p. 66)

p. 67)

p. 150)

Front panel Display Rear panel Remote Index

Contents

Connections Playback Settings Tips Appendix

System buttons

These perform playback related operations.

Tuning up / Tuning down buttons (TUNE +, –)

These select either FM broadcast or AM broadcast. (v p. 82)

SMART SELECT buttons (1 – 4)

These call up settings registered to each button, such as input source, volume level and sound mode settings. (v p. 139)

SOUND MODE buttons

These select the sound mode. (v

Remote control signal transmitter

This transmits signals from the remote control unit. (v

SLEEP button

This sets the sleep timer. (v p. 137)

p. 122)

p. 8)

Front panel Display Rear panel Remote Index

Q6 Q7

Contents

Connections Playback Settings Tips Appendix

POWER button (X)

This turns the power on/off.

“Turning the power on” (v p. 66)

“Playback in ZONE2” (v

ECO Mode button (G)

This switches to ECO Mode. (v

VOLUME buttons (df)

These adjusts the volume level.

“Adjusting the volume” (v

“Adjusting the volume (ZONE2)” (v p. 150)

OPTION button

This displays the option menu on the TV screen.

ENTER button

This determines the selection.

SETUP button

This displays the menu on the TV screen. (v p. 154)

p. 149)

p. 216)

p. 67)

Front panel Display Rear panel Remote Index

Contents Connections Playback Settings Tips Appendix

Connections

Contents

Connecting speakers 26

Connecting a TV 48

Connecting a playback device 52

Connecting an iPod or USB memory device to the USB port 56

Connecting an FM/AM antenna 58

Connecting to a home network (LAN) 60

Connecting an external control device 62

Connecting the power cord 64

NOTE

Do not plug in the power cord until all connections have been completed.

However, when the “Setup Assistant” is running, follow the instructions in the “Setup Assistant” (page 8 in the separate “Quick Start Guide”) screen for making connections. (During “Setup Assistant” operation, the input/output connectors do not conduct current.)

Do not bundle power cords together with connection cables. Doing so can result in

noise.

Cables used for connections

Provide necessary cables according to the devices you want to connect.

Speaker cable

Subwoofer cable

HDMI cable

Component video cable

Video cable

Coaxial digital cable

Optical cable

Audio cable

LAN cable

Front panel Display Rear panel Remote Index

FL FR

SBL

SBR

SW1

SW2

SL SR

Contents Connections Playback Settings Tips Appendix

Connecting speakers

Install speakers and connect them to this unit. (“Speaker installation” (v p. 26), “Speaker connection” (v p. 33))

Speaker installation

Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Speaker installation is explained using this example of a typical installation.

FL/FR

(Front speaker left/ right):

C (Center speaker):

SL/SR

(Surround speaker left/ right):

SBL/SBR

(Surround back speaker left/right):

SW 1/2 (Subwoofer) :

Front panel Display Rear panel Remote Index

Place the FRONT left and right speakers an equal distance from the main listening position. The distance between each speaker and your TV should also be the same.

Place the CENTER speaker in between the front speakers and above or below your TV.

Place the SURROUND left and right speakers an equal distance to the left and right sides of the main listening position. If you don’t have surround back speakers, move the surround speakers slightly behind your listening position.

Place the SURROUND BACK left and right speakers an equal distance from the main listening position and directly behind the main listening position. When using a single surround back speaker (SB), place it directly behind the listening position.

Place the SUBWOOFER at a convenient location near the front speakers. If you have two subwoofers, place them asymmetrically across the front of your room.

FHL FHR

TFR

TFL

TMR

TML

Contents Connections Playback Settings Tips Appendix

FHL/FHR

(Front height speaker left/right):

TFL/TFR

(Top front speaker left/right):

TML/TMR

(Top middle speaker

left/right):

Place the FRONT HEIGHT left and right speakers directly above the front speakers. Mount them as close to the ceiling as possible and aim them towards the main listening position.

Mount the TOP FRONT left and right speakers on the ceiling slightly in front of your main listening position and aligned with the left and right front speakers.

Mount the TOP MIDDLE left and right speakers directly above the main listening position and aligned with the left and right front speakers.

Front panel Display Rear panel Remote Index

FDL FDR

SDL SDR

Contents

Connections Playback Settings Tips Appendix

About Dolby Atmos Enabled speakers

Dolby Atmos Enabled speakers reflect the sound off the ceiling to allow the sound to come from over your head by using a special upwardpointing speaker that is placed on the floor.

You can enjoy the Dolby Atmos 3D sound even in an environment where speakers cannot be installed on the ceiling.

FDL/FDR

(Front Dolby speaker left/right):

on the front speaker. For a Dolby Atmos Enabled integrated with a front speaker, place the Dolby Atmos Enabled speaker instead of the front speaker.

Place the FRONT Dolby Atmos Enabled speaker

SDL/SDR

(Surround Dolby speaker left/right):

Place the SURROUND Dolby Atmos Enabled speaker on the surround speaker. For a Dolby Atmos Enabled speaker integrated with a surround speaker, place the Dolby Atmos Enabled speaker instead of the surround speaker.

Front panel Display Rear panel Remote Index

Front height speaker

z1: 30° – 45° z2: 30° – 55°

z3: 65° – 100°

GViewed from the sideH

Top middle speaker

Top front speaker

Front speaker

Surround speaker

Surround back speaker

Point slightly downwards

FHL

TML

TFL

FHR

TMR

TFR

Height speakers layout

GViewed from the topH

Contents

This unit is compatible with Dolby Atmos and DTS:X which offers an even wider

and deeper surround sensation. Use the illustration below as a guide for how high each speaker should be

installed. The height does not need to be exactly the same.

Connections Playback Settings Tips Appendix

Front panel Display Rear panel Remote Index

SBL

SBR

Listening

position

Contents

Connections Playback Settings Tips Appendix

When 7.1-channel speakers are installed using

surround back speakers

1:22° - 30° z2:90° - 110° z3:135° - 150°

When using a single surround back speaker, place it directly behind the listening

position.

When 5.1-channel speakers are installed

1:22° - 30° z2:120°

Front panel Display Rear panel Remote Index

+ 261 hidden pages