5. PARTS LOCATION .................................................................................................... 27
6. IC DATA ..................................................................................................................... 40
7. EXPLODED VIEW AND PARTS LIST ........................................................................ 43
8. ELECTRICAL PARTS LIST ........................................................................................ 50
Please use this service manual with referring to the user guide ( D.F.U. ) without fail.
R
Printed on 100% Recycled Paper
Printed in Japan
PS5200 / PS7200
341W855010 MIT
First Issue 2002.02
MARANTZ DESIGN AND SERVICE
Using superior design and selected high grade components, MARANTZ company has created the ultimate in stereo sound.
Only original MARANTZ parts can insure that your MARANTZ product will continue to perform to the specifications for which
it is famous.
Parts for your
MARANTZ equipment are generally available to our National Marantz Subsidiary or Agent.
ORDERING PARTS :
Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be specified.
The following information must be supplied to eliminate delays in processing your order :
1. Complete address
2. Complete part numbers and quantities required
3. Description of parts
4. Model number for which part is required
5. Way of shipment
6. Signature : any order form or Fax. must be signed, otherwise such part order will be considered as null and void.
CAUTION : After servicing this appliance and prior to returning to customer, measure the resistance between either primary AC
cord connector pins ( with unit NOT connected to AC mains and its Power switch ON ), and the face or Front Panel of product and
controls and chassis bottom.
Any resistance measurement less than 1 Megohms should cause unit to be repaired or corrected before AC power is applied, and
verified before it is return to the user/customer.
Ref. UL Standard No. 1492.
In case of difficulties, do not hesitate to contact the Technical
Department at above mentioned address.
020110MIT
1. TECHNICAL SPECIFICATIONS
PS5200PS7200
AMPLIFIER SECTION
Maximum Power Output (6 ohms / EIAJ)
Front .................................................................................... 135W
Center .................................................................................. 135W
The relation between the selected surround mode and the input signal
The surround mode is selected with the surround mode selector knob of the PS5200 / PS7200 or the remote control unit.
However, the sound from thespeakers depend upon the relationship between the selected surround mode and the input
signal. They are as follows;
PS7200
Surround
ModeInput Indicator Format Status & Surround ModeTemporary Display StatusCh. Status
AutoDolby Digital (5.1ch)
StereoDolby Digital (5.1ch)
MovieDolby Digital (2ch)
MusicDolby Digital (2ch)
Pro Logic Dolby Digital (2ch)
DTSDolby Digital (5.1ch)-----DIGITAL(DOLBY, DIGITAL), DTS>DTS>-
6.1ChDolby Digital (5.1ch)
Surround Dolby Digital (2ch)-----DIGITAL(DOLBY, DIGITAL)>6.1 CH SURROUND>-
MovieDolby Digital (5.1ch)-----DIGITAL(DOLBY, DIGITAL), DSP SOUND>
HallDolby Digital (2ch)-----DIGITAL(DOLBY, DIGITAL), DSP SOUND>
StadiumDolby Digital (2ch:Lt/Rt)-----DIGITAL(DOLBY, DIGITAL), DSP SOUND>
Matrix96kHz PCM-----DIGITAL(PCM), DSP SOUND>
Input Signal
Dolby Digital (2ch)
Dolby Digital (2ch:Lt/Rt)
96kHz PCM
PCM(Audio)
Analog
DTS (5.1ch)
AAC(5.1)
AAC(2.0)
Dolby Digital (2ch)
Dolby Digital (2ch:Lt/Rt)
96kHz PCM
PCM(Audio)
Analog
DTS (5.1ch)
AAC(5.1)
AAC(2.0)
Dolby Digital (5.1ch)
Dolby Digital (2ch:Lt/Rt)
96kHz PCM-----DIGITAL(PCM), DOLBY, PRO LOGIC>PLII MOVIE>96kHz>PCM(Audio)
Analog
DTS (5.1ch)-----DIGITAL(DTS), DOLBY, PRO LOGIC>PLII MOVIE>AAC(5.1)
AAC(2.0)
Dolby Digital (5.1ch)
Dolby Digital (2ch:Lt/Rt)
96kHz PCM-----DIGITAL(PCM), DOLBY, PRO LOGIC>PLII MUSIC>96kHz>PCM(Audio)
Analog
DTS (5.1ch)-----DIGITAL(DTS), DOLBY, PRO LOGIC>PLII MUSIC>AAC(5.1)
AAC(2.0)
Dolby Digital (5.1ch)
Dolby Digital (2ch:Lt/Rt)
96kHz PCM-----DIGITAL(PCM), DOLBY, PRO LOGIC>PRO LOGIC>96kHz>PCM(Audio)
Analog
DTS (5.1ch)-----DIGITAL(DTS), DOLBY, PRO LOGIC>PRO LOGIC>AAC(5.1)
AAC(2.0)
Dolby Digital (2ch)-----DIGITAL(DOLBY, DIGITAL), DTS>DTS>Dolby Digital (2ch:Lt/Rt)-----DIGITAL(DOLBY, DIGITAL), DTS>DTS>96kHz PCM-----DIGITAL(PCM), DTS>DTS>96kHz>PCM(Audio)-----DIGITAL(PCM), DTS>DTS>Analog-----(ANALOG)DTS>DTS>DTS (5.1ch)
AAC(5.1)-----DIGITAL(MPEG), DTS>DTS>AAC(2.0)-----DIGITAL(MPEG), DTS>DTS> -
Surround
ModeInput Indicator Format Status & Surround ModeTemporary Display StatusCh. Status
VirtualDolby Digital (5.1ch)
CS5.1Dolby Digital (5.1ch)-----DIGITAL(DOLBY DIGITAL), CIRCLE SURROUND>CS5.1>-
6CHDolby Digital (5.1ch)
StereoDolby Digital (2ch)
Input Signal
Dolby Digital (2ch)
Dolby Digital (2ch:Lt/Rt)
96kHz PCM-----DIGITAL(PCM), DOLBY, VIRTUAL>VIRTUAL>96kHz>PCM(Audio)
Analog
DTS (5.1ch)-----DIGITAL(DTS), DOLBY, VIRTUAL>VIRTUAL>AAC(5.1)-----DIGITAL(MPEG), DOLBY, VIRTUAL>VIRTUAL>AAC(2.0)-----DIGITAL(MPEG), DOLBY, VIRTUAL>VIRTUAL>-
Dolby Digital (2ch)-----DIGITAL(DOLBY DIGITAL), CIRCLE SURROUND>CS5.1>Dolby Digital (2ch:Lt/Rt)-----DIGITAL(DOLBY DIGITAL), CIRCLE SURROUND>CS5.1>96kHz PCM-----DIGITAL(PCM), CIRCLE SURROUND>CS5.1>96kHz>PCM(Audio)
Analog
DTS (5.1ch)-----DIGITAL(DTS), CIRCLE SURROUND>CS5.1>AAC(5.1)-----DIGITAL(MPEG), CIRCLE SURROUND>CS5.1>AAC(2.0)-----DIGITAL(MPEG), CIRCLE SURROUND>CS5.1>-
Dolby Digital (2ch:Lt/Rt)
96kHz PCM-----DIGITAL(PCM)>6CH STEREO>96kHz>PCM(Audio)
Analog
DTS (5.1ch)
AAC(5.1)
AAC(2.0)
SL : Surround Left
SR : Surround Right
SC : Mono Surround
LFE : Low Frequency Effect
NOTES:
• Dolby Digital (2 ch: Lt/Rt): signal with Dolby Surround flag Speakers are full set.
• When DOLBY DIGITAL, DTS, PCM or ANALOG is blinking, the selected surround mode is unavailable for input signal.
Select the other appropriate surround mode to playback.
• No sound outputs from the surround speaker, center speaker and subwoofer if the DVD disc has no surround data.
3
PS5200
Surround
ModeInput Indicator Format Status & Surround ModeTemporary Display StatusCh. Status
AutoDolby Digital (5.1ch)
StereoDolby Digital (5.1ch)
MovieDolby Digital (2ch)
MusicDolby Digital (2ch)
Pro Logic Dolby Digital (2ch)
DTSDolby Digital (5.1ch)-----DIGITAL(DOLBY, DIGITAL), DTS>DTS>-
6.1ChDolby Digital (5.1ch)
Surround Dolby Digital (2ch)-----DIGITAL(DOLBY, DIGITAL)>6.1 CH SURROUND>-
MovieDolby Digital (5.1ch)-----DIGITAL(DOLBY, DIGITAL), DSP SOUND>
HallDolby Digital (2ch)-----DIGITAL(DOLBY, DIGITAL), DSP SOUND>
StadiumDolby Digital (2ch:Lt/Rt)-----DIGITAL(DOLBY, DIGITAL), DSP SOUND>
Matrix96kHz PCM-----DIGITAL(PCM), DSP SOUND>
VirtualDolby Digital (5.1ch)
6CHDolby Digital (5.1ch)
StereoDolby Digital (2ch)
Input Signal
Dolby Digital (2ch)
Dolby Digital (2ch:Lt/Rt)
96kHz PCM
PCM(Audio)
Analog
DTS (5.1ch)
AAC(5.1)
AAC(2.0)
Dolby Digital (2ch)
Dolby Digital (2ch:Lt/Rt)
96kHz PCM
PCM(Audio)
Analog
DTS (5.1ch)
AAC(5.1)
AAC(2.0)
Dolby Digital (5.1ch)
Dolby Digital (2ch:Lt/Rt)
96kHz PCM-----DIGITAL(PCM), DOLBY, PRO LOGIC>PLII MOVIE>96kHz>PCM(Audio)
Analog
DTS (5.1ch)-----DIGITAL(DTS), DOLBY, PRO LOGIC>PLII MOVIE>AAC(5.1)
AAC(2.0)
Dolby Digital (5.1ch)
Dolby Digital (2ch:Lt/Rt)
96kHz PCM-----DIGITAL(PCM), DOLBY, PRO LOGIC>PLII MUSIC>96kHz>PCM(Audio)
Analog
DTS (5.1ch)-----DIGITAL(DTS), DOLBY, PRO LOGIC>PLII MUSIC>AAC(5.1)
AAC(2.0)
Dolby Digital (5.1ch)
Dolby Digital (2ch:Lt/Rt)
96kHz PCM-----DIGITAL(PCM), DOLBY, PRO LOGIC>PRO LOGIC>96kHz>PCM(Audio)
Analog
DTS (5.1ch)-----DIGITAL(DTS), DOLBY, PRO LOGIC>PRO LOGIC>AAC(5.1)
AAC(2.0)
Dolby Digital (2ch)-----DIGITAL(DOLBY, DIGITAL), DTS>DTS>Dolby Digital (2ch:Lt/Rt)-----DIGITAL(DOLBY, DIGITAL), DTS>DTS>96kHz PCM-----DIGITAL(PCM), DTS>DTS>96kHz>PCM(Audio)-----DIGITAL(PCM), DTS>DTS>Analog-----(ANALOG)DTS>DTS>DTS (5.1ch)
AAC(5.1)-----DIGITAL(MPEG), DTS>DTS>AAC(2.0)-----DIGITAL(MPEG), DTS>DTS> -