|
Cordless Screwdriver |
Instruction manual |
GB |
||
|
|
|
|
Visseuse sans Fil |
Manuel d’instructions |
F |
||
|
|
|
|
Akku-Schrauber |
Betriebsanleitung |
D |
||
|
|
|
|
Avvitatore senza fili |
Istruzioni per l’uso |
I |
||
|
|
|
|
Accuschroefmachine |
Gebruiksaanwijzing |
NL |
||
|
|
|
|
Atornillador Inalámbrico |
Manual de instrucciones |
E |
||
|
|
|
|
Parafusadeira a Bateria |
Manual de instruções |
P |
||
|
|
|
|
Akku-skruemaskine |
Brugsanvisning |
DK |
||
|
|
|
|
Κατσαβίδι μπαταρίας |
Οδηγίες χρήσης |
GR |
||
|
|
|
DFS441
DFS451
011811
1 |
4 |
2
3
1 |
011812 |
2 |
011389 |
6
5
3 |
011816 |
4 |
011817 |
A |
B |
|
7 |
5 |
011818 |
3 mm
8
7 |
011815 |
2
A
8
B
6 |
011813 |
8
8 |
011819 |
9 |
8 |
|
|
|
|
|
|
|
|
10 |
|
|
11 |
1213 |
|
|
|
||
9 |
011820 |
10 |
|
011821 |
11 |
011822 |
3
ENGLISH (Original instructions)
Explanation of general view
1. |
Red indicator |
6. |
Lamp |
11. |
Groove |
2. |
Button |
7. |
Reversing switch lever |
12. |
Hook |
3. |
Battery cartridge |
8. |
Locator |
13. |
Screw |
4. |
Star mark |
9. |
Bit |
|
|
5. |
Switch trigger |
10. |
Magnetic bit holder |
|
|
|
|
|
|
|
|
SPECIFICATIONS
|
Model |
DFS441 |
DFS451 |
|
Capacities |
|
Drywall screw |
4 mm |
4 mm |
No load speed (min-1) |
0 - 4,000 |
0 - 4,000 |
||
Overall length |
|
With short locator |
281 mm |
281 mm |
|
With long locator |
296 mm |
296 mm |
|
|
|
|||
|
Net weight |
1.4 kg |
1.5 kg |
|
|
Rated voltage |
D.C. 14.4 V |
D.C. 18 V |
•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
•Specifications and battery cartridge may differ from country to country.
•Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use |
ENE033-1 |
The tool is intended for screw driving in wood, metal and plastic.
General Power Tool Safety |
|
Warnings |
GEA010-1 |
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
CORDLESS SCREWDRIVER |
|
SAFETY WARNINGS |
GEB050-2 |
1.Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
2.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
3.Hold the tool firmly.
4.Keep hands away from rotating parts.
5.Do not touch the bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
IMPORTANT SAFETY INSTRUCTIONS ENC007-7
FOR BATTERY CARTRIDGE
1.Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
2.Do not disassemble battery cartridge.
3.If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion.
4.If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight.
5.Do not short the battery cartridge:
(1)Do not touch the terminals with any conductive material.
(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
(3)Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
4