Lincoln MKX (2010) Navigation System [ru]

0 (0)

Navigation System

if equipped

	Table of Contents

Introduction	5
System introduction	5
Driving restrictions	6
What is SYNC ?	7
Safety information	8
How to get going	9

System overview	14
Map display options	21
Display voice commands	22
Status bars	22
Home screen	22
Loading pictures	23
Reverse camera	24
Quick reference chart	25
Setting the clock	27

Voice recognition system overview	31
How to use voice commands	33
Adjusting the voice prompt volume	34
Voice recognition tutorial	36
Tutorial voice commands	36
Voice name tags	37
User profiles	37
User profile voice commands	39

Audio features	41
AM/FM	42
Radio voice commands	44
SIRIUS satellite radio voice commands	46
Satellite radio (if equipped)	47
CD	50
CD voice commands	53
Playing a DVD in the system	53
DVD voice commands	55
Video CD voice commands	56
Disc voice commands	56

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

Table of Contents

Jukebox features	56
Recording (saving) music to your jukebox	57
Accessing the music in your jukebox	58
Creating a playlist	59
Jukebox voice commands	62
User Device (if equipped)	63
Rear DVD voice commands	64
DVD (if equipped)	65

Climate features (if equipped)	67
Climate voice commands	69

Information menu	70
Where am I?	70
Hybrid information	70
SIRIUS Travel Link™	78
SIRIUS Travel Link™ voice commands	82
Accessing your calendar	83
Accessing the help screen	84

Sound menu features	86

Setting a destination	88
Setting a destination by voice	89
Quick destination options	90
Standard destination options	91
POI categories	96
Route selection	102
Destination voice commands	104
Quick touch buttons	107
Map icons	108

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

	Table of Contents

Navigation route preferences	110
Map preferences	112
Route preferences	113
Navigation voice commands	116

General Information	117
Map updates	117
Navigation end user license agreement	117
Glossary	123

SYNC phone features (if equipped)	127
Phone dependent features	127
Quickstart - How to get going	127
Pairing your phone through your navigation system	127
Making a call	129
SYNC phone features	130
Saving a contact or phone number as a Quick Dial	131
Accessing your phone book	132
Call history	133
System settings	133
Adding (pairing) a phone	134
Connecting a phone	135
Deleting a phone	135
Advanced settings	136
Turning Bluetooth on/off	137
911 assist™	138
Vehicle health report	142
Setting a ring tone	146
Message notification	147
Automatically download your phone book	148
Modifying your phone book and call history	149
Turning prompts on/off	151
Returning to factory defaults	152
Performing a master reset	153
Installing new vehicle applications	153
Accessing SYNC system information	154
Text messaging with your navigation system	155
Forwarding a text message	159
Voice commands in phone mode	160

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

Table of Contents

SYNC media features (if equipped)	162
Connecting your digital media player to SYNC	162
SYNC media features	163
What’s playing?	164
Supported player, media formats and metadata information	164
Accessing and using your USB port	165
Streaming music from your phone	166
Using the Auxiliary input jack (Line in)	166
Using the play all feature	168
Selecting and playing specific artists	168
Selecting and playing specific albums	169
Selecting different genres	169
Accessing your playlists	170
Playing a specific track	171
Exploring the USB device	171
Accessing BT devices	172
Adding a new device in discovery or discoverable mode	173
Voice commands in media mode	174

DVD interaction (if equipped)	176

SYNC End user license agreement	184

Index	192

All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

Introduction

MOBILE MEDIA NAVIGATION SYSTEM

Your vehicle is equipped with a mobile media navigation system which allows you to listen to, record and save music, play DVDs (audio and video), navigate the vehicle and operate climate control functions (if equipped).

Your system has a large range of features, yet is easy to use. The display screen is the primary means for operating the system through the use of its vertically tabbed menus, text screens and menu displays. Screen selections are made by touching the desired selection on the touch screen. The “tabs” along the left side of the screen represent the major components of the system. The status bars at the top and bottom of the screen will stay present for the majority of the time once the system is turned on and ready for operation. The top status bar will contain menu names, icons, and a clock. The lower status bar contains climate information (if equipped), icons and advisory messages. Please refer to Status bars in the System Overview chapter for more information. Navigation guidance is shown on the display touch screen and is supplemented with voice prompts.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

Introduction

DRIVING RESTRICTIONS

In order to prevent the navigation system from distracting you while driving, access to certain functions are restricted when the vehicle is traveling above 5 mph (8 km/h). At this time, only the Quick Destination menu items are available for destination entry. Restricted functions include:

•Touchscreen keyboard during destination entry (Street address, POI, Freeway Entrance/Exit, Intersection)

•Scrolling of long lists

•Travel Link subscriptions (if active) such as movie times, ski conditions, sports scores and scrolling of the weather map

•Editing/Adding entries in the Address Book

•Editing/Adding entries in the Avoid Areas List

•Jukebox restrictions such as creating/editing playlists, sorting playlists, editing track, artist and album names

•Uploading photographs

Note: If your vehicle is equipped with SYNC , similar features will be restricted also.

When the vehicle begins to move, and the Select Route Screen is shown, the highlighted route is automatically selected and guidance begins. When the vehicle speed is reduced to 5 mph (8 km/h) or less, system restrictions are lifted and you have full access to the system.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

Introduction

SYNC (IF EQUIPPED)

SYNC is a hands-free communications and entertainment system that literally ‘syncs up’ with all other multimedia systems in your vehicle. SYNC delivers convenience with voice activated calling and hands-free conversations, digital media player command and control as well as easy to use voice commands. The world outside your vehicle cabin may be chaotic, but inside, with SYNC , it’s always a smooth ride. All you have to do is sync it and stow it. We’ll take care of the rest.

Welcome to the new world of ingenuity and passion - technology that is both fun and functional. Welcome to SYNC .

Please visit www.SyncMyRide.com.

SYNC features

SYNC offers a variety of phone and media features, such as:

•Send and receive hands-free calls

•Play your digital music through voice activated commands

•Use voice recognition to access your cell phone’s contact list

•Transfer an active phone conversation to a hands-free environment

•Play music stored on your digital media player

•Use your device while charging through the USB port

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

Introduction

•Listen to music streaming from your Bluetooth enabled cellular phone

•Advanced voice recognition system fluent in English, French and Spanish

SAFETY INFORMATION

WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that

drivers use extreme caution when using any device that may take their focus off the road. The driver’s primary responsibility is the safe operation of their vehicle. Only use cell phones and other devices not essential to the driving task when it is safe to do so.

•Do not attempt to service or repair the system. See your authorized dealer.

•Do not operate playing devices if the power cords and/or cables are broken, split or damaged. Carefully place cords and/or cables where they will not be stepped on or interfere with the operation of pedals, seats and/or compartments, or safe driving abilities.

•Do not leave playing devices in the vehicle in extreme conditions as it could cause damage to your device. Refer to your device’s user guide for further information.

•For your safety, some functions are speed dependent and cannot be performed when the vehicle is traveling at speeds 5 mph (8 km/h) and below.

•Ensure that you review your device’s user guide before using with SYNC .

VOICE RECOGNITION

Your navigation system is equipped with a voice activated feature which allows you to “speak” certain commands to the system. For further information, please refer to the Voice recognition chapter. You can also

press

and say a command or “Help” after the prompt.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

Introduction

QUICK START

WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that

drivers use extreme caution when using any device that may take their focus off the road. The drivers primary responsibility is the safe operation of their vehicle. Only use cell phones and other devices not essential to the driving task when it is safe to do so.

TO PLAY A RADIO STATION

1. Ensure that the navigation system is on.

2. Press the RADIO hard button.

3. Select the ‘AM’ or ‘FM’ tab on the touchscreen.

• Turn the TUNE knob to the right/left to go up/down the frequency band in individual increments.

•Or, press SEEK to find the next strong station up/down the frequency band.

Note: If RDS is ON and PTY (Program type) is selected, the station selection will be limited to that specific genre. In satellite radio mode (if activated), seek is limited to the selected genre.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

Introduction

TO PLAY SATELLITE RADIO (IF ACTIVATED)

1.Ensure that the navigation system is on.

2.Press the RADIO hard button on

the navigation system.

3. Select the ‘SAT’ tab on the touchscreen. (If your vehicle is equipped with Satellite Radio, the SAT tab will be present on the radio screen).

For further information on Satellite Radio, refer to Satellite Radio in the Audio Features chapter.

TO LOAD A CD OR DVD:

1.Insert a CD or DVD into the slot.

2.A CD will begin to play. A DVD will play audio and video if the vehicle is in Park (P). Otherwise, only the audio will play.

3.Use the touch controls on the

screen to advance tracks, scan, pause, view the track list, etc.

TO PLAY A PREVIOUSLY LOADED CD OR DVD:

1.Ensure that the navigation system is on.

2.Press the MEDIA hard button on

the navigation system.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

Introduction

3.Select CD/DVD tab on the touchscreen (if there is not a CD or DVD loaded into the system, the tab will be disabled and NO DISC will appear in the Status Bar when you try to select it).

4.A CD will begin to play. A DVD will begin to play audio and video if the vehicle is in Park (P). Otherwise, only audio will play.

TO SET A DESTINATION USING THE NAVIGATION SYSTEM:

1.Ensure that the navigation system is on.

2.Press the DEST hard button on

the navigation system.

3.Select the ‘Standard’ tab on the touchscreen and then press ‘Street Address’ to enter a specific street address as your destination. (From this screen you can also choose POI, Address book entry, previous destination, Phone number, Freeway Entrance/Exit , Map or intersection as your destination).

4.Enter the required information. Please note that:

•The system uses a Smart Speller, which helps facilitate entering information through the keyboard.

•Accented characters in English, Spanish and French are converted internally to non-accented characters for search purposes.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

Introduction

5.The screen will show the point entered on a map. If this is the intended destination, press ‘Set As Dest’. A message will pop up while the system is computing the route.

6.Select the desired route on the

right hand side of the screen. There will be up to three routes possible (fastest, shortest and unrestricted) from which to choose, each highlighted with a different color. For each route, the overall distance, route conditions and the estimated travel time are displayed.

7. Press ‘Start Route’ and follow the instructions.

TO PLAY A PREVIOUSLY LOADED DVD IN THE FAMILY ENTERTAINMENT DVD SYSTEM (IF EQUIPPED)

1.Press MEDIA on the navigation system.

2.Press the ‘Rear DVD’ tab.

If your vehicle is equipped with a rear overhead mounted DVD system, the system will start playing the previously loaded DVD. If this DVD was played, but not finished before, it will begin to play where it was left off the last time it was played in the system.

If your vehicle is equipped with a dual headrest DVD system, the ‘Rear DVD’ tab will gain you access to headrest monitor A.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

Introduction

USING THE AUXILIARY INPUT JACK:

Your vehicle is equipped with an auxiliary input jack which allows a portable audio device to be listened to through your vehicle’s audio system. To access the auxiliary input jack mode:

1.Press the MEDIA hard button on the navigation system.

2.Select the ‘LINE IN’ tab on the touchscreen.

Once a 3.5 mm input jack is plugged into the Line In jack, sound from the device will be heard through the vehicle speakers.

For information on the auxiliary input jack location, please refer to

Auxiliary input jack in the Entertainment chapter in your Owner’s Guide.

USING SYNC (IF EQUIPPED)

Your vehicle may be equipped with SYNC — a hands-free communication and entertainment system which allows you to connect and use a portable media player through a USB port located in your vehicle, pair a Bluetooth enabled cellular phone, and operate these devices through your vehicle. Please refer to the SYNC media chapter

for more information on using portable media players with SYNC and refer to the SYNC phone chapter for information on pairing your Bluetooth enabled cellular phone and using the phone features.

VOICE RECOGNITION

Your navigation system is equipped with a voice activated feature that allows you to “speak” certain commands to the system. For further information, please refer to Voice recognition system overview chapter.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

FORD AND MERCURY SYSTEM

LINCOLN SYSTEM

Note: If your navigation system does not appear as one of the systems above, please refer to Navigation system in the next section.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that

1.I (Information): Press I to access the information menu. Press while the information menu is active

to step through the information tabs of: Where am I?, HEV (if equipped), SIRIUS Travel Link (if activated), the Calendar, System Info (System Information). and Help.

2.PHONE: Press PHONE to access

the phone menu (if equipped with SYNC ).

3.CLIMATE: Press CLIMATE to access the climate menu. Press the button while the climate menu is

active to step through the climate menu tabs of Front Zone and Rear Zone (if equipped).

4. (Eject): Press (Eject) to

eject the disc in the slot.

5. TUNE: In radio or satellite

radio mode (if activated), turn to advance in individual increments up/down the frequency/channel

listing.

In MP3 mode, turn to advance to the next/previous folder.

RPT: In navigation mode, press the knob in while navigation guidance is active to repeat the last spoken navigation guidance prompt.

6. DISP: Press the DISP button to step through the following display modes: On, Status Bar Only, and Off.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

7. SOUND: Press SOUND to access

the sound menu. Press while the sound menu is active to step

through the sound menu tabs of

Bass/Treble, Balance/Fade, SCV (Speed compensated volume), DSP (Digital Signal Processing) and the Visualizer.

8. SEEK:In radio and satellite radio mode (if activated),

press / to seek to the

previous/next available station or channel within the currently selected Category/Genre.

In CD/DVD mode, press / to access the previous/next track or chapter.

9. MEDIA: Press MEDIA to access the media menu. Press while the media menu is active to step

through the available media sources of CD/DVD, Jukebox, User Device, Rear DVD (Rear overhead mounted DVD), if equipped, and Rear AUX (Rear overhead mounted AUX inputs), if equipped.

10. RADIO: Press RADIO to access

the radio menu. Press while the radio menu is active to step through

the available radio sources of AM, FM1, FM2, SAT1, SAT2, and SAT3 (satellite radio, if activated).

11.VOL (On/off/volume): Press to turn the audio system on/off. Press and hold to turn the navigation radio completely off. Turn to adjust the volume of the audio system or the navigation voice prompts as they are being given.

Note: If a route is active when the navigation system is turned off, the route is resumed when the system is turned on again.

12.Memory presets:In radio and

satellite radio mode (if activated): Press 1-6 to access

your previously saved preset

stations/channels. To save to a preset: Tune to the desired station/channel. Press and hold the desired preset button in which you would like to store the station/channel. The sound will momentarily mute and then return when the preset is saved.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

13. MENU: Press MENU to access

the system menu. Press while the system menu is active to step

through the system menu tabs of

Display, Clock, Feedback Settings, System Settings and Valet Mode.

14.MAP: Press MAP to access the navigation map. Press while the map display is active to center the map

on the current vehicle position. Press while the map display is active and a route is active to step through the different map guidance views.

15.DEST: Press DEST to access

the navigation destination entry menu. Press while the navigation

destination entry menu is active to show additional destination entry techniques.

16.NAV: Press NAV to access the navigation menu. Press while the navigation menu is active to step through the navigation menu tabs.

17.CD/DVD slot: Insert a CD or DVD, label side up.

After the system initializes, the screen will be divided in two sections:

•Status bars: This is the top and bottom portion of screen that displays the clock or date and useful information, depending on the current mode.

•Display area: The interactive screen that is activated by finger touch and changes depending on current system operation. Graphical buttons are displayed in this area depending on the current screen for you to make choices.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

Navigation system

Note: If your navigation system does not appear as this system, please refer to the previous section.

WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that

1. Memory presets: In radio and

satellite radio mode (if activated): Press 1-6 to access

your previously saved preset

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

2. CD/DVD slot: Insert a CD or DVD, label side up.

3. (Eject): Press (Eject) to eject the disc in the slot.

4. TUNE: In radio or satellite

radio mode (if activated), turn to advance in individual increments

up/down the frequency/channel listing.

In MP3 mode, turn to advance to the next/previous folder.

RPT: In navigation mode, press the knob in while navigation guidance is active to repeat the last spoken navigation guidance prompt.

5. MAP: Press MAP to access the

navigation map. Press while the map display is active to center the map

on the current vehicle position. Press while the map display is active and a route is active to step through the different map guidance views.

6. DEST: Press DEST to access the navigation destination entry menu. Press while the navigation destination entry menu is active to

show additional destination entry techniques.

7. NAV: Press NAV to access the navigation menu. Press while the navigation menu is active to step through the navigation menu tabs.

8. I (Information): Press I to access the information menu. Press while the information menu is active

to step through the information tabs

of: Where am I?, HEV (if equipped), SIRIUS Travel Link (if activated), the Calendar, System Info., and Help.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

9. PHONE: This control is not operational.

10. DISP: Press the DISP button to step through the following display modes: On, Status Bar Only, and Off.

11. SEEK:In radio and satellite radio mode (if activated),

Press / to seek to the

previous/next available station or

channel within the currently selected Category/Genre.

In CD/DVD mode, press / to access the previous/next track or chapter.

12. MENU: Press MENU to access the system menu. Press while the system menu is active to step

through the system menu tabs of Display, Clock, Feedback Settings, System Settings and Valet Mode.

13. SOUND: Press SOUND to access the Sound menu. Press while the sound menu is active to step

through the sound menu tabs of

Bass/Treble, Balance/Fade, SCV (Speed compensated volume), DSP and the Visualizer.

14. MEDIA: Press MEDIA to access the media menu. Press while the media menu is active to step

through the available media sources

of CD/DVD, Jukebox, User Device, Rear DVD (Rear overhead mounted DVD, if equipped) and Rear AUX (Rear overhead mounted AUX inputs, if equipped).

15. RADIO: Press RADIO to access the radio menu. Press while the radio menu is active to step through

the available radio sources of AM, FM1, FM2, SAT1, SAT2, and SAT3 (satellite radio, if activated).

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

16. VOL (On/off/volume): Press to

turn the audio system on/off. Press and hold to turn the navigation

radio completely off. Turn to adjust

the volume of the audio system or the navigation voice prompts as they are being given.

Note: If a route is active when the navigation system is turned off, the route is resumed when the system is turned on again.

After the system initializes, the screen will be divided in two sections:

•Status bars: This is the top and bottom portion of screen that displays the clock or date and useful information, depending on the current mode.

SCREEN DIFFERENCES

Depending on your vehicle line and option package, your navigation screen may vary in appearance from the screens shown in this supplement. These differences could include: background color, tab options, climate controls and other features. Your features may also be limited depending on your market. (For example, SIRIUS Travel Link™ is only available in the continental United States). Please check with your authorized dealer for availability.

Display options

You can choose to turn your navigation screen on/off and also if you would like to view the status bars on the top and bottom of the screen. To access:

Press DISP on the navigation system repeatedly to cycle through these options.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

Voice commands in display mode (if equipped)

While in display mode, press or VOICE on the steering wheel controls. When prompted, you may say any of the following commands:

• Display on	• Auto
• Day	• Night
• Status bar	• Display off
• Brighter	• Dimmer
• Help

Note: If you are not in display mode, press or VOICE on the steering wheel controls. When prompted, say, “Display mode” and then any of the above commands.

STATUS BARS

Your navigation screens may have status bars on the top and bottom of each screen.

The status bar on the top of the

screen will tell your current mode, the exterior temperature, the time

as well as display icons if you have

enabled Bluetooth, or are using headphones with your Rear overhead mounted Family entertainment DVD system among other options.

The status bar on the bottom of the screen may list the Home icon, the current temperature selected for the

Driver and Passenger as well as the fan speed and air flow direction, the current mode being used (if equipped), the Artist and Title of the currently playing CD (if available), Artist and Title for Jukebox (if available) and satellite radio (if activated).

Note: As climate controls are vehicle dependent, some vehicles may not display climate readings in the status bar.

HOME SCREEN

Your navigation system has a Home Screen where you can save/view favorite pictures, view your current audio and climate control settings as well as display the audio visualizer or the hybrid fuel economy (if equipped). You can split the screen in to two or three different sections, or you can choose to have one main view.

To access your home screen, press the house icon ( ) at the bottom left hand corner of any screen.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

The left side of the screen will display an uploaded photo or the map screen. The right side can also display the uploaded photo. The upper right panel will only display the current audio settings. The lower right panel displays the vehicle’s climate settings (if equipped), the visualizer or the hybrid fuel economy (if equipped).

Press on the bottom of the display to access the settings screen for the left or right side.

Loading pictures

Your navigation system allows you to save and view up to 32 photos. To access:

1.Ensure that you are on the Home Screen. (Press at the bottom left of any screen to access.)

2.Touch the left side of the home screen to initiate the left screen photo display and saved photos screen.

3.Select the ‘Add’ button on the touchscreen. The following disclaimer will appear, “Please confirm the supported photo formats”.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

4.When the pop-up dialog box with the disclaimer appears, press OK and ensure that you are using the proper format.

5.Insert a CD-ROM which contains your photos as jpegs.

6.Press OK. The photos will be listed on the right half of the screen.

7.Select either ADD or ADD ALL.

The photos are now saved to the hard drive.

Photo display limitations:

•The file must be 1.5MB or less.

•The extension of the file must be one of JPE/JPG/JPEG.

•The CD or DVD must be ISO 9660 format, UDF format is not supported.

•The file path must be 255 characters or less.

•Up to 256 files or folders can be displayed in one folder.

•Not compatible with discs written in Packet Write mode.

•Only the photograph(s) which meet these conditions will be displayed.

Note: When burning a CD, ensure that you ‘close’ or ‘finalize’ the disc when the CD-burning process finishes (you should select this option before you start burning). Consult your software manual or the program’s Help files if you’re not sure how to finalize the disc. Also, write the audio data into the first session of a multi-session CD as audio systems won’t be able to sort through other sessions to find more audio tracks.

REVERSE CAMERA (IF EQUIPPED)

Your vehicle may be equipped with a reverse camera on the tailgate which provides a video image of the area behind the vehicle. When the transmission is in Reverse (R), an image will automatically display on the navigation screen. Once the vehicle is back in Drive (D), the image will continue to display until you are driving over 5 mph (8 km/h). To remove this image from the screen, press any hard button on the navigation system.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

When the vehicle is in Park (P), you may press SETTINGS to make adjustments to the brightness of the display as well as the rear camera display.

When the rear camera delay function is ON, it extends the display of the camera image into Drive mode until vehicle speed is greater than 5 mph (8 km/h). This is useful when trying to engage/disengage a trailer.

Prior to using, ensure that the camera lens is clear of any debris, mud, etc. and that both reverse lamps are operational if using at night. For further information, please refer to Reverse camera system in the

Driving chapter of your Owner’s Guide.

QUICK REFERENCE CHART

SYNC works with your navigation system, rear overhead mounted DVD system (if equipped), voice commands and also through your steering wheel controls. Below is a quick listing of the functions of your steering wheel controls and navigation system controls.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

Navigation		Steering wheel		Function
bezel control			control	Function
bezel control			control
N/A				Press to answer an incoming call.
				Press to send a call or text message
				(if supported).
				Press and hold to end a call.
				Press and hold to end a call.
				Press it initiate a redial.
N/A	VOICE			Press to activate Voice Recognition.
				Press and hold to end an active
				voice session.
				Refer to the Voice recognition
				system overview chapter for further
				information.
SEEK	,			Press to access the previous/next
		,		preset radio station, preset satellite
				preset radio station, preset satellite
				channel (if activated) or CD track.
				channel (if activated) or CD track.
				Press and hold to seek to the next
				satellite channel (if activated).
N/A	OK			Press to confirm your selection.
MEDIA	N/A			Press repeatedly to access all
				available media sources in your
				vehicle such as: CD, DVD, Jukebox,
				Rear Zone, Rear AUX, Rear DVD
				(Rear overhead mounted DVD), Line
				In, and User Device (if equipped
				with SYNC ).
PHONE	N/A			Press to access SYNC PHONE
				features.

SYSTEM MENU FEATURES

Your system has many menu features such as allowing you to adjust the touchscreen brightness, adjusting the time and languages, adjusting the feedback and system settings. To access, press the MENU hard button on the navigation system.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

Display options

1.Press the MENU hard button on the navigation system.

2.Select the ‘Display’ tab on the touchscreen. Select from the following display options:

Brightness: Select AUTO DIM to manually adjust the brightness by pressing + or —.

Contrast: Press + to increase and

— to decrease the level of contrast on the screen.

Day/Night Mode: Select ‘Day’ to always display day mode or ‘Night’ to always display night mode. Select ‘Auto’ for the screen to automatically change between day and night mode.

Color Palette (Available on Lincoln vehicles only): Select between four different background colors: 1. Black, 2. Blue, 3. Green, 4. Red.

Note: When the headlamps are on under high ambient light conditions, the system will remain in day mode, even if night is selected.

Setting the clock

1.Press the MENU hard button on the navigation system.

2.Select the ‘Clock’ tab on the touchscreen. Select from the following display options:

Time set buttons: To set the time, press +, — to increase/decrease the time and select AM or PM.

Display clock: Press to turn the clock display on/off. Format: Press to select between 12 hour and 24 hour format.

Auto time zone: If enabled, the system will automatically adjust the time when you enter into a new time zone. If disabled, you will have to manually adjust the time when entering different time zones. Note: The system does not implement daylight savings time.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

Restore defaults: Select ‘Reset’ to reset to the default settings.

Feedback settings

1.Press the MENU hard button on the navigation system.

2.Select the ‘Feedback Settings’ tab on the touchscreen. Select from the following display options:

Voice recognition user profile: You can ‘train’ the system to better recognize your voice. Two profiles can be created. Refer to the Voice Recognition section for more information.

Button tone: Select to select/adjust when the system will sound a tone. Press ‘Button tone’ to then select from:

•All Buttons: Select to have the system sound a tone when any hard or soft key is touched.

•Touch Screen: Select to have the system only sound a tone when a selection is made on the touch screen.

•Off: Select to turn off all tones.

Voice volume: Press + to increase or — to decrease the volume level of the navigation voice. Voice volume adjustment also includes the volume level of chimes.

Voice recognition interaction mode: This feature determines the level of interaction/feedback you will receive from the system.

•Standard: This is the default setting. The ‘Standard setting’ provides you with the most interaction / feedback in the form of prompts.

•Advanced: This feature has less prompts and feedback.

Voice recognition confirmation:

•On: Select to have the system always ask to confirm/verify a command.

•Off: Select to have the system ask less frequently to confirm /verify a command.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

System overview

System settings

1.Press the MENU hard button on the navigation system.

2.Select the ‘System Settings’ tab on the touchscreen. Select from the following display options:

Language: Select between ‘English’, ‘Francais’ or ‘Espanol’.

Units: Select between ‘English’ and ‘Metric’.

Keyboard layout: Select ‘ABC’ or ‘QWERTY’ for the keyboard layout in the display.

Delete stored items: Select ‘View’ to see what areas contain stored items. From each area, you can delete all of the entries.

Restore factory default settings: Press ‘Reset’ to return to the factory default settings.

Valet Mode: Press to access Valet Mode.

•Enable Valet Mode: Select to lock the system with a four digit PIN. The same PIN must be entered to unlock the system and disable valet mode.

Valet mode

1.Press the MENU hard button on the navigation system.

2.Select the ‘Valet Mode’ tab on the

touchscreen. Press ‘Enable Valet Mode’.

2010 Centerstack (ng1)

Supplement, 2nd Printing USA (fus)

+ 166 hidden pages