<![endif]>ESPAÑOL ENGLISH
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating your set and retain it for future reference.
TYPE : WALL MOUNTED |
|
MODELS |
Outdoor Unit |
Indoor Unit |
|
TSNH121TNW2(SP121HN NTM2) |
TSUH121TNW2(SP121HN USM2) |
TSNC121TNW2(SP121CN NTM2) |
TSUC121TNW2(SP121CN USM2) |
TSNC122TNW2(SP122CN NTM2) |
TSUC122TNW2(SP122CN USM2) |
TSNH122TNW2(SP122HN NTM2) |
TSUH122TNW2(SP122HN USM2) |
TSNC1825NW7(SP182CN N5M7) |
TSUC1825NW7(SP182CN USM7) |
TSNH1825NW2(SP182HN N5M2) |
TSUH1825NW2(SP182HN USM2) |
TSNC2425NW7(SP242CN N5M7) |
TSUC2425NW7(SP242CN USM7) |
TSNH2425NW3(SP242HN N5M3) |
TSUH2425NW3(SP242HN USM3) |
www.lg.com
P/NO : MFL68070407
<![endif]>ENGLISH
2 |
TIPS FOR SAVING ENERGY |
|
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below:
•Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.
•Block sunlight with blinds or curtains while you are operating the air conditioner.
•Keep doors or windows closed tightly while you are operating the air conditioner.
•Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
•Speed up the fan to cool or warm indoor air quickly, in a short period of time.
•Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.
•Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the air flow or weaken the cooling / dehumidifying functions.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
WARNING: Before accessing the terminals, all power circuits must be disconnected.
WARNING: Fixed installations will incorporate disconnect means in accordance with installation rules.
WARNING: This device will not be accessible to public.
WARNING: The appliance must be installed in accordance with national regulations for electrical installations.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
SAFETY PRECAUTIONS 3
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product
! WARNING
It can result in serious injury or death when the directions are ignored
! CAUTION
It can result in minor injury or product damage when the directions are ignored
! WARNING
•Installation or repairs made by unqualified persons can result in hazards to you and others.
•Appliance shall be installed in accordance with national wiring regulations.
•The information contained in the manual is intended for use by a qualified service technician familiar with safety procedures and equipped with the proper tools and test instruments.
•Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.
Installation
•Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.
•Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.
•Always use a power plug and socket with a ground terminal.Failure to do so may result in electric shock or product failure
•Install the panel and the cover of the control box safely. Failure to do so may result in explosion or fire.
•Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure to do so may result in electric shock or product failure.
•Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.
•Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled off or deteriorated then it must be replaced. It may result in fire or electric shock.
•Be cautious when you unpack or install the air conditioner. Failure to do so may result in serious injury or product failure.
•Do not install the air conditioner on an unstable surface or where there may be a danger of it falling. It may result in death, serious injury, or product failure.
•Use inflammable gas (nitrogen) to inspect leak and to purge air, using compressed air or flammable gas may cause fire or explosion.
<![endif]>ENGLISH
<![endif]>ENGLISH
4 SAFETY PRECAUTIONS
Operation
•Do not let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure.
•Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Failure to do so may result in fire, electric shock, or product failure.
•Do not place any objects on the power cord. It may result in electric shock or product failure.
•Do not turn on or off the air conditioner by plugging in or unplugging the power plug. It may result in fire or electric shock.
•Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or product failure.
•Do not place a heater or other heating appliances near the power cable. It may result in fire, electric shock, or product failure.
•Do not allow water to run into the air conditioner. It may result in explosion or fire.
•Do not leave flammable substances such as gasoline, benzene and thinner near the air conditioner. It may result in explosion or fire.
•Do not use the air conditioner for an extended period of time in a small place without ventilation. Ventilate the place regularly. Failure to do so may result in explosion or fire.
•When there is a gas leak, ventilate sufficiently before using the air conditioner again. Failure to do so may result in explosion or fire.
•Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to do so may result in explosion or fire.
•Stop operating and close the window in strom or hurricane.If possible remove the product from the window before hurricane arrives
•Do not touch the electrostatic filter after opening the front grille. Failure to do so may result in electric shock or product failure.
•Contact an authorized service center when the air conditioner is submerged into water due to flooding. Failure to do so may result in explosion or fire.
•Be cautious water could not enter the product
•Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater are used simultaneously. Failure to do so may result in fire, serious injury, or product failure.
•Turn the main power off and unplug the power plug when you clean or repair the air conditioner. Failure to do so may result in death, serious injury, or product failure.
•Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to do so may result in product failure.
•Do not place any objects on the air conditioner. It may result in product failure.
•For inner cleaning, contact an Authorized Service Center or a dealer. Do not use harsh detergent that causes corrosion or damage on the unit. Harsh detergent may also cause failure of product, fire, or electronic shock.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
!CAUTION
Installation
•Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure to do so may result in product failure.
•Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result in product failure.
SAFETY PRECAUTIONS 5
• Keep level even when installing the product. |
<![if ! IE]> <![endif]>ENGLISH |
|
|
• Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not incon- |
|
venience the neighbors. Failure to do so may result in conflict between neighbors. |
|
• When transporting the equipment, there should be at least 2 or more people, or a forklift. It may re- |
|
sult in serious injury. |
|
• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may re- |
|
sult in product failure. |
|
Operation
•Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may result in serious injury.
•Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. It may result in death, fire or electric shock.
•Do not block the inlet or outlet of air flow. It may result in explosion or product failure.
•Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water. Use a smooth cloth. It may result in serious injury or product failure.
•Never touch the metal parts of the air conditioner when you remove the air filter. It may result in serious injury or product failure.
•Do not place any objects on the air conditioner. It may result in product failure.
•Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if necessary.
•Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. It may result in electric shock.
•Do not drink the water drained from the air conditioner. It may result in serious health complications.
•Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure to do so may result in serious injury or product failure.
•Do not mix the batteries for the remote control with other types of batteries or mix new batteries with used batteries. Failure to do so may result in product failure.
•Do not recharge or disassemble the batteries. Failure to do so may result in explosion, fire or serious injury.
•Stop using the remote control if there is a battery fluid leak. If your cloth or skin is exposed to the battery fluid from a leak, wash it off with clean water. Failure to do so may result in serious injury.
•If you swallow the battery fluid from a leak, wash out the inside of your mouth thoroughly and then consult a doctor. Failure to do so may result in serious health complications.
!WARNING
•Before accessing the terminals, all power circuits must be disconnected.
•Fixed installations will incorporate disconnect means in accordance with installation rules.
•This device will not be accessible to public.
•Install the device in accordance to national codes for electrical installations.
<![endif]>ENGLISH
6 |
TABLE OF CONTENTS |
|
|
|
TABLE OF CONTENTS
2 |
TIPS FOR SAVING ENERGY |
|
13 |
ADVANCED FUNCTIONS |
|
3 |
IMPORTANT SAFETY IN- |
13 |
Changing room temperature quickly |
||
13 |
Removing humidity |
||||
|
STRUCTIONS |
||||
|
14 |
Indoor air purification |
|||
7 |
BEFORE USE |
||||
14 |
Auto Clean operation |
||||
7 |
Components |
14 |
Auto operation |
||
|
|
||||
8 |
Using the remote control |
14 |
Auto Changeover operation |
||
|
|
||||
9 |
Inserting batteries |
15 |
Energy saving cooling mode |
||
|
|
||||
9 |
Installing the remote control holder |
15 |
Display screen brightness |
||
|
|
||||
10 |
BASIC FUNCTIONS |
15 |
Operating the air conditioner without the |
||
|
|
|
|
remote control |
|
10 |
Cooling your room |
|
|
||
16 |
Restarting the air conditioner automati- |
||||
10 |
Heating your room |
||||
|
|
cally |
|||
|
|
|
|
||
10 |
Airing your room |
16 |
Comfort Sleep Mode |
||
|
|
||||
10 |
Adjusting the fan speed |
|
17 |
MAINTENANCE |
|
11 |
Adjusting the air flow direction |
||||
18 |
Cleaning the air filter |
||||
11 |
Setting the timer |
||||
18 |
Cleaning the 3M Filter |
||||
11 |
- Setting the current time |
||||
|
|
|
|||
11 |
- Turning on the air conditioner auto- |
|
19 |
TROUBLESHOOTING |
|
|
matically at a set time |
19 |
Self-diagnosis function |
||
|
|
11- Turning off the air conditioner automatically at a set time
12- Canceling the timer setting
12 Setting sleep mode
19 Operation ranges
19Before requesting service
20Spec sheet
BEFORE USE |
7 |
|
BEFORE USE
Components
Indoor unit
Air Inlet
Front Panel
ON/OFF Button
Air Filter
Signal Receptor
Operation Indication Lamps
|
|
|
On/Off |
Lights up during the system operation, error code and auto restart setting. |
|
|
|
|
|
|
|
|
|
Lights up during timer operation.(non-Inverter Model) |
|
|
|
Timer |
Lights up during timer operation or sleep mode auto operation (Inverter |
|
|
|
|
Model only) |
|
|
|
|
|
|
|
|
Defrost |
Lights up during defrost mode or hot start operation |
|
|
|
||
|
|
|
mode |
(Heat pump model only) |
Outdoor unit Lights up during outdoor unit operation. (Cooling model only) operation
* The feature can be changed according a type of model.
! NOTE
The number of operation lamps and their locations may vary, depending on the model of the
air conditioner.
Outdoor unit
Air intake vents
Connecting wires
Refrigerant pipes
Air outlet vents
Base plate |
Drain hose |
|
<![endif]>ENGLISH
* The feature can be changed according a type of model.
<![endif]>ENGLISH
8 BEFORE USE
Using the remote control
You can operate the air conditioner more conveniently with the remote control. You will find the
buttons for the additional functions under the cover of the remote control.
Wireless remote control
Display
screen
FRESH |
SUEÑO |
DRY |
CÓMODO |
Control
panel
Control |
Display |
Description |
|
panel |
screen |
|
|
|
|
||
|
|
|
|
|
D |
Fresh dry mode selection button* : |
|
|
Removes excess moisture. |
|
|
|
|
|
|
|
|
Sleep mode auto button*: Sets the |
|
|
l sleep mode auto operation. |
|
|
_ |
|
Temperature adjustment buttons: |
|
|
Adjusts the room temperature when |
||
o cooling and heating. |
|
||
| |
- |
On/Off button: Turns the power on/off. |
|
|
|
|
|
r |
L |
fanIndoorspeed.fan speed button: Adjusts the |
|
|
|
|
|
|
A C |
|
|
|
E B |
Operation mode selection button*: |
|
|
|
Selects the operation mode. |
|
q |
Cooling-only |
|
|
model |
Cooling operation (A) / Auto operation |
||
|
A C |
or auto changeover (C) / Air circulation |
|
|
(E) / Heating operation (B) |
|
|
|
E |
|
|
|
|
|
|
|
|
|
|
M |
m |
Jet cooling/heating button*: Warms up |
|
or cools down the indoor temperature |
|||
within a short period of time. |
|
||
|
|
Comfort sleep button: Set optimal air |
|
|
|
current, air flow, and timer to help com- |
|
|
|
fortable sleep |
|
|
|
|
|
|
: |
Air flow direction button: Adjusts the air |
|
|
|
flow direction vertically. |
|
|
S |
Temperature display button: Displays |
|
|
the room temperature. Press |
for |
|
|
|
5 sec, conversion °C / °F |
|
nTimer button: Sets the current time and the start / end time.
Navigation and functions button*: Adjusts the time and sets the special
J G functions.
J: Auto clean / G: Operates energy saving cooling
s |
- |
Set/clear button: Sets or cancels func- |
tions. |
||
r |
- |
Reset button : Resets the remote con- |
trol settings. |
||
|
- |
LIGHT button: Adjusts the brightness |
|
of the indoor unit display. |
|
|
|
*Some functions may not be supported, depending on the model.
|
BEFORE USE |
9 |
||
|
|
|
||
Inserting batteries |
2 Fix the holder by fastening the 2 screws |
|||
|
firmly with a screwdriver.
Insert batteries before using the remote
control. The battery type used is AAA (1.5 V)
1 Remove the battery cover.
3 Slide the remote control into the holder.
2 Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly.
|
Operating method |
3 Reattach the battery cover. |
Point the remote control towards the signal |
receiver at the bottom of the air conditioner to |
|
|
operate it. |
! NOTE
If the display screen of the remote control starts to fade, replace the batteries.
Installing the remote control holder
Install the holder where there is no direct sunlight to protect the remote control.
1 Choose a safe and easily-accessible place.
!NOTE
•The remote control may operate other electronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner.
•For proper operation, use a soft cloth to clean the signal transmitter and receiver.
<![endif]>ENGLISH
<![endif]>ENGLISH
10 BASIC FUNCTIONS
BASIC FUNCTIONS
Cooling your room
(Cooling operation)
1 Press |to turn on the power.
2Press qrepeatedly to select the cooling operation.
- A is displayed on the display screen.
3Press G or H to set the desired temperature.
-The temperature range is 18°C(64°F) – 30°C(86°F)
Airing your room
(Air Circulation operation)
This mode only circulates the indoor air without changing the room temperature. The cooling lamp lights up in air circulation mode.
1 Press |to turn on the power.
2Press qto select the air circulation operation.
- E is displayed on the display screen.
3 Press rto adjust the fan speed.
Heating your room
(Heating operation)
1 Press |to turn on the power.
2Press qrepeatedly to select the heating operation.
- B is displayed on the display screen.
3Press Gor Hto set the desired temperature.
-The temperature range is 16°C(60°F) – 30°C(86°F)
Adjusting the fan speed
1Press rrepeatedly to adjust the fan speed.
-Select 5 if you want natural air. The fan speed adjusts automatically.
Remark |
Speed |
High
Medium
Low
Natural Wind
! NOTE
Cooling-only models do not support this function.
BASIC FUNCTIONS 11
Adjusting the air flow direction
1To adjust the direction of the air flow hori-
zontally, press repeatedly and select the desired direction.
-Select H to adjust the direction of the air flow automatically.
!NOTE
•Adjusting the air flow direction vertically may not be supported, depending on the model.
•Adjusting the air deflector arbitrarily may cause product failure.
•If you restart the air conditioner, it starts to operate with the previously set direction of air flow, so the air deflector may not match the icon displayed on the re-
mote control. When this occurs, press
to adjust the direction of the air flow again.
Setting the timer
You can use the timer function to save energy and to use the air conditioner more efficiently.
Setting the current time
1Press and hold it for longer than 3 seconds.
-The AM/PM icon flickers at the bottom of the display screen.
2 Press Eor F to select the minutes.
3 Press sto finish.
Turning on the air conditioner automatically at a set time
1Press .
-The icon below flickers at the bottom of the display screen.
2 Press Eor F to select the minutes.
3 Press sto finish.
! NOTE
After setting the time. current time will be displayed.
Turning off the air conditioner automatically at a set time
1Press .
-The icon below flickers at the bottom of the display screen.
2 Press Eor F to select the minutes.
3 Press sto finish.
! NOTE
After setting the time. current time will be displayed.
<![endif]>ENGLISH
<![endif]>ENGLISH
12 BASIC FUNCTIONS
Canceling the timer setting
1 Press .
2Press or
to select the timer setting to cancel.
3Press s.
- To cancel all timer settings, press s.
Setting sleep mode
Use the sleep mode to turn off the air conditioner automatically when you go to sleep.
1 Press |to turn on the power.
2 Press l
3Press Eor F to select the hour (up to 7 hours).
4 Press sto finish.
- Tis displayed on the display screen in sleep mode.
! NOTE
In the Cooling and Dehumidifying modes, the temperature increases by 1°C after 30 minutes and by a further 1°C after another 30 minutes for a more comfortable sleep. The temperature increases with up to 2°C from the preset temperature.
ADVANCED FUNCTIONS 13
ADVANCED FUNCTIONS
The air conditioner offers some additional advanced functions.
Changing room temperature quickly
(Jet Cool)
This mode allows you to cool indoor air quickly in summer or warm it quickly in winter.
1 Press |to turn on the power.
2 Press M.
Removing humidity
(Fresh dry)
This mode removes excess moisture from an environment with high humidity or in the rainy season, in order to prevent mold from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.
1 Press .
2 Press |to turn on the power.
3Press to set the dehumidifying operation.
- D is displayed on the display screen.
-In jet cooling mode, strong air blows out at a temperature of 18°C for 30 minutes.
!NOTE
•Powerful Cooling
- H/P Model (Powerful Heating Option is excluded)
Enable in Cooling/Dehumidifying/Fan
- C/O Model
Enable in Cooling/Dehumidifying/Fan/ Artificial intelligent/Air Clean Operation
•This function may not be supported, depending on the model.
!NOTE
•In this mode you cannot adjust the room temperature, as it is adjusted automatically. Also, the room temperature is not displayed on the display screen.
<![endif]>ENGLISH