LG A12LL User guide

4 (1)

OWNER’S MANUAL

AIR

CONDITIONER

Please read this manual carefully before operating your set and retain it for future reference.

TYPE : WALL MOUNTED INVERTER

P/NO : MFL68124603

www.lg.com

<![if ! IE]>

<![endif]>БЪЛГАРСКИ MAGYAR POLSKI NEDERLANDS PORTUGUESE ΕΛΛΗΝΙΚA DEUTSCH FRANÇAIS ESPAÑOL ITALIANO ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

2

TIPS FOR SAVING ENERGY

 

 

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below:

Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.

Block sunlight with blinds or curtains while you are operating the air conditioner.

Keep doors or windows closed tightly while you are operating the air conditioner.

Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

Speed up the fan to cool or warm indoor air quickly, in a short period of time.

Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.

Clean the Air filter once every 2 weeks. Dust and impurities collected in the Air filter may block the air flow or weaken the cooling / dehumidifying functions.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:

Model number :

Serial number :

You can find them on a label on the side of each unit.

Dealer’s name :

Date of purchase :

IMPORTANT SAFETY INSTRUCTIONS

3

 

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product

! WARNING

It can result in serious injury or death when the directions are ignored

! CAUTION

It can result in minor injury or product damage when the directions are ignored

! WARNING

Installation or repairs made by unqualified persons can result in hazards to you and others.

Appliance shall be installed in accordance with national wiring regulations.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

The information contained in the manual is intended for use by a qualified service technician familiar with safety procedures and equipped with the proper tools and test instruments.

Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.

When the power cord is to be replaced, replacement work shall be performed by authorized personnel only using only genuine replacement parts.

Installation

Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.

Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.

Always use a power plug and socket with a ground terminal.Failure to do so may result in electric shock or product failure

Install the panel and the cover of the control box safely. Failure to do so may result in explosion or fire.

Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure to do so may result in electric shock or product failure.

Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled off or deteriorated then it must be replaced. It may result in fire or electric shock.

Be cautious when you unpack or install the air conditioner. Failure to do so may result in serious injury or product failure.

Do not install the air conditioner on an unstable surface or where there may be a danger of it falling. It may result in death, serious injury, or product failure.

Use inflammable gas (nitrogen) to inspect leak and to purge air, using compressed air or flammable gas may cause fire or explosion.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4

IMPORTANT SAFETY INSTRUCTIONS

 

 

Operation

Do not let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure.

Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Failure to do so may result in fire, electric shock, or product failure.

Do not place any objects on the power cord. It may result in electric shock or product failure.

Do not turn on or off the air conditioner by plugging in or unplugging the power plug. It may result in fire or electric shock.

Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or product failure.

Do not place a heater or other heating appliances near the power cable. It may result in fire, electric shock, or product failure.

Do not allow water to run into the air conditioner. It may result in explosion or fire.

Do not leave flammable substances such as gasoline, benzene and thinner near the air conditioner. It may result in explosion or fire.

Do not use the air conditioner for an extended period of time in a small place without ventilation. Ventilate the place regularly. Failure to do so may result in explosion or fire.

When there is a gas leak, ventilate sufficiently before using the air conditioner again. Failure to do so may result in explosion or fire.

Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to do so may result in explosion or fire.

Stop operating and close the window in strom or hurricane.If possible remove the product from the window before hurricane arrives

Do not touch the electrostatic filter after opening the front grille. Failure to do so may result in electric shock or product failure.

Contact an authorized service center when the air conditioner is submerged into water due to flooding. Failure to do so may result in explosion or fire.

Be cautious water could not enter the product

Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater are used simultaneously. Failure to do so may result in fire, serious injury, or product failure.

Turn the main power off and unplug the power plug when you clean or repair the air conditioner. Failure to do so may result in death, serious injury, or product failure.

Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to do so may result in product failure.

Do not place any objects on the air conditioner. It may result in product failure.

For inner cleaning, contact an Authorized Service Center or a dealer. Do not use harsh detergent that causes corrosion or damage on the unit. Harsh detergent may also cause failure of product, fire, or electronic shock.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

IMPORTANT SAFETY INSTRUCTIONS

5

 

! CAUTION

Installation

Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure to do so may result in product failure.

Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result in product failure.

Keep level even when installing the product.

Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not inconvenience the neighbors. Failure to do so may result in conflict between neighbors.

When transporting the equipment, there should be at least 2 or more people, or a forklift. It may result in serious injury.

Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may result in product failure.

Operation

Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may result in serious injury.

Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. It may result in death, fire or electric shock.

Do not block the inlet or outlet of air flow. It may result in explosion or product failure.

Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water. Use a smooth cloth. It may result in serious injury or product failure.

Never touch the metal parts of the air conditioner when you remove the Air filter. It may result in serious injury or product failure.

Do not place any objects on the air conditioner. It may result in product failure.

Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if necessary.

Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. It may result in electric shock.

Do not drink the water drained from the air conditioner. It may result in serious health complications.

Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure to do so may result in serious injury or product failure.

Do not mix the batteries for the remote control with other types of batteries or mix new batteries with used batteries. Failure to do so may result in product failure.

Do not recharge or disassemble the batteries. Failure to do so may result in explosion, fire or serious injury.

Stop using the remote control if there is a battery fluid leak. If your cloth or skin is exposed to the battery fluid from a leak, wash it off with clean water. Failure to do so may result in serious injury.

If you swallow the battery fluid from a leak, wash out the inside of your mouth thoroughly and then consult a doctor. Failure to do so may result in serious health complications.

Do not open or close the front panel by force during the front panel moving.

Should open front panel after lift down front panel slowly when the product is operating.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

6

TABLE OF CONTENTS

 

 

TABLE OF CONTENTS

2

TIPS FOR SAVING ENERGY

13

ADVANCED FUNCTIONS

 

 

 

 

 

3

 

13

Changing room temperature quickly

IMPORTANT SAFETY

13

Auto indoor cleaning

 

INSTRUCTIONS

13

- Auto Clean operation

 

 

13

Display the current energy usage

7BEFORE USE

7Components

8Using the remote control

9- Inserting batteries

9- Installing the remote control holder

10 BASIC FUNCTIONS

10 Cooling your room

10 Heating your room

14 Plasmaster Purification operation

14 Auto operation

14Auto Changeover operation

15Silent mode

15 Energy Control mode

15Display screen brightness

16Operating the air conditioner without the remote control

17Restarting the air conditioner automatically

10Removing humidity

11Airing your room

11 Adjusting the fan speed

11 Adjusting the air flow direction

11 Setting the timer

11- Setting the current time

12- Turning on the air conditioner automatically at a set time

12- Turning off the air conditioner automatically at a set time

12 - Setting sleep mode

12 - Canceling the timer setting

18 MAINTENANCE

20 Cleaning the Air filter

20Cleaning the 3M filter

21TROUBLESHOOTING

21 Self-diagnosis function

21 Before requesting service

BEFORE USE

7

 

BEFORE USE

Components

Indoor unit

Front panel

Air inlet

 

On/ Off button

 

Display

3M filter

 

Air filter

 

Ionizer

Signal

 

receiver

Air outlet

Air deflector

(Vertical louver & Horizontal vane)

*The feature can be changed according to a type of model.

!NOTE

The number of operation lamps and their locations may vary, depending on the model of the air conditioner.

Outdoor unit

Air Intake Vents

Connecting

Wires

Piping

Air Outlet Vents

Drain Hose

Base Plate

* The feature can be changed according to a type of model.

Operation ranges

The table below indicates the temperature ranges the air conditioner can be operated within.

Mode

Indoor temperature

Outdoor temperature

Cooling

18°C~32°C

-10°C~48°C

Heating

16°C~30°C

-15°C~24°C

<![if ! IE]>

<![endif]>ENGLISH

LG A12LL User guide
<![if ! IE]>

<![endif]>ENGLISH

8 BEFORE USE

Using the remote control

You can operate the air conditioner more conveniently with the remote control.

Wireless remote control

Display

screen

Control

panel

Control

Display

 

 

 

 

 

Description

panel

screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

K

IONIZER button* : Plasmaster Ionizer

sterilize the aerial bacteria and other

 

 

 

 

 

 

harmful substances.

 

 

 

 

 

 

Sleep mode auto button*: Sets the

l l sleep mode auto operation.

_

 

 

Temperature adjustment buttons:

 

 

Adjusts the room temperature when

 

o cooling and heating.

|

 

-

On/Off button: Turns the power on/off.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

g

L

fanIndoorspeed.fan speed button: Adjusts the

 

 

 

 

 

 

Operation mode selection button*:

 

f

A C

Selects the operation mode.

 

Cooling operation (A) / Auto operation

 

D B E or auto changeover (C) /

 

 

 

 

 

 

Dehumidifying operation (D) / Heating

 

 

 

 

 

 

operation (B) / Air circulation (E)

M

m

Jet cooling/heating button*: Warms up

or cools down the indoor temperature

 

 

 

 

 

 

within a short period of time.

 

 

 

 

 

 

 

 

DE IJ Air flow direction button: Adjusts the air

 

 

 

 

 

 

flow direction vertically or horizontally.

 

 

 

 

 

S

Temperature display button: Displays the

 

 

 

 

 

 

 

 

 

 

room temperature.

 

 

 

 

 

 

 

 

 

 

 

 

 

m n n Timer button: Sets the start / end time.

 

 

 

 

 

 

 

 

 

C

 

Navigation and functions button*: Adjusts

B

I

the time and sets the special functions.

J

I: Operates SILENT mode / JOperates

 

 

 

 

 

J

E/Control mode / J: Auto Clean. Press

 

 

 

 

 

 

 

for 3 sec. Silent Mode and E/Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

are not available at the same time.

 

 

 

 

 

 

G

-

LIGHT button: Adjusts the brightness

of the indoor unit display.

 

 

 

 

 

-

Energy Display Button : Set whether or not

 

 

 

 

 

 

 

 

 

 

to display information regarding Energy.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-

Filter button : When cleaning the filter,

 

 

 

 

 

 

 

 

 

 

press

 

 

for 3sec.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

p

-

Set/clear button: Sets or cancels

functions.

 

rReset button: Resets the air

-conditioner settings.

* Some functions may not be supported, depending on the model.

Loading...
+ 17 hidden pages