LG Electronics 65LS33A, 32LS33A, 42LS35A, 47LS33A, 47LS35A User Manual

OWNER’S MANUAL

MONITOR SIGNAGE

Please read this manual carefully before operating the your set and retain it for future reference.

MONITOR SIGNAGE MODELS

32LS33A 42LS35A 42LS33A 47LS35A 47LS33A 55LS35A 55LS33A

65LS33A

www.lg.com

ENGLISH

2TABLE OF CONTENTS

TABLE OF CONTENTS

	3	LICENSES	35		- Viewing the Contents List
	4	ASSEMBLING AND		36 CUSTOMIZING SETTINGS
			36		Accessing Main Menus
		PREPARING
			37		- PICTURE Settings
	4	Accessories
			40		- AUDIO Settings
	5	Optional Accessories
			41		- TIME Settings
	6	Parts and Buttons
			42		- OPTION Settings
	7	Connecting the Stand
			43		- NETWORK Settings

8Connecting the Speaker

	9 Using the IR Receiver			44	TROUBLESHOOTING
	9	Portrait Layout
	10	Mounting on a Wall
	12	REMOTE CONTROL		46	SPECIFICATIONS
				62	IR CODES
	14	MAKING CONNECTIONS
			63
	15	RGB Connection			CONTROLLING THE MULTIPLE
	16	HDMI Connection
					PRODUCT
	16	IR Receiver Connection
			63		Connecting the Cable
	17	USB Connection
			63		RS-232C Configurations
	17	LAN Connection
			63		Communication Parameter
	18	USING THE MONITOR	64		Command Reference List
			66		Transmission / Receiving Protocol
	18	Using the Input List
	18	Adjusting Aspect Ratio
	20 ENTERTAINMENT
	20	Using the Network

20- Connecting to a Wired Network

21- Network Status

22Using the My Media

22 - Connecting USB storage devices

24 - Browsing Files

27 - Viewing Movies

30 - Viewing Photos

32 - Listening to Music

LICENSES 3

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies To obtain your registration code, locate the DivX VOD section in your device setup menu.

Go to vod.divx.com for more information on how to complete your registration. DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of Rovi

Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

ENGLISH

ENGLISH

4ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

Accessories

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

								Power Cord	D-sub 15-pin Signal Cable

Remote Control and
Batteries	IR Receiver	CD (Owner's Manual,
		SuperSign Program/ Manual)/
		Cards

CAUTION

yyDo not use any pirated items to ensure the safety and product life span.

yyAny damages or injuries by using pirated items are not covered by the warranty.

NOTE

yyThe accessories supplied with your product may vary depending on the model.

yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

ASSEMBLING AND PREPARING 5

Optional Accessories

Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories.

ENGLISH

	Stand
ST-321T	32LS33A
ST-421T	42LS33A/ 42LS35A
ST-471T	47LS33A/ 47LS35A
	55LS33A/ 55LS35A
ST-651T	65LS33A

Screws

Diameter 4.0 mm x Pitch 0.7 mm x Length 14 mm (Included Spring Washer)

Stand kit

Media Player

MP500/ MP700

Speaker	Cable holder/
SP-2100	Cable Tie

Screws	Screws
Diameter 4.0 mm x Pitch	Diameter 4.0 mm x
0.7 mm x Length 8 mm	Pitch 1.6 mm x Length
(Included Spring Washer)	10 mm

Speaker kit

Screws	CD(Owner's Manual)/
	Cards

Media Player kit

NOTE

yyCable holder/cable tie may not be available in some areas or for some models. yyOptional accessories are not included for all models.

6ASSEMBLING AND PREPARING

Parts and Buttons

ENGLISH

1
2
3	Connection Panel
4
5
6

Screen Buttons

No.	Description

1Moves the selection up and down.

2Adjusts the volume level.

3Displays the current signal and mode.

Press this button to adjust the screen automatically (available only in RGB mode)

4Accesses the main menus, or saves your input and exits the menus.

5Changes the input source.

6Turns the power on or off.

Connecting the Stand

- Only on some models.

1Place a soft cloth on the table and put the product with the screen facing downward.

2Use the screws to secure the stand on the rear side of the product as shown in the diagram.

ASSEMBLING AND PREPARING 7

ENGLISH

ENGLISH

8ASSEMBLING AND PREPARING

Connecting the Speaker

-Only on some models.

32LS33A

1 Connect the input signal cable to the monitor before installing the speakers. Use a cable tie to organize the cables.

42LS33A 47LS33A 55LS33A 42LS35A 47LS35A 55LS35A 65LS33A

1Connect the input signal cable to the monitor before installing the speakers. Use a cable tie to organize the cables.

	2 Mount the speaker by using a screw as shown	2 Mount the speaker by using a screw as shown
		in the following. Make sure the power cable is
	in the following. Make sure the power cable is	disconnected.
	disconnected.

	3 Then connect the speaker cable. After installing
3 Then connect the speaker cable. After installing	your speakers, use holders and cable ties to
your speakers, use holders and cable ties to	organize the speaker cables.
organize the speaker cables.

ASSEMBLING AND PREPARING 9

Using the IR Receiver	Using the Kensington security system

This allows a remote control sensor to be placed in a custom location. The IR receiver is made with a magnet. You can attach it to the monitor edge.

The Kensington security system connector is located at the back of the monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the monitor set and a table.

Portrait Layout

To install in portrait mode, rotate the set counterclockwise 90 degrees when looking at from the front.

NOTE

yyThe Kensington security system is optional. You can obtain additional accessories from most electronics stores.

ENGLISH

ENGLISH

10 ASSEMBLING AND PREPARING

Mounting on a Wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

10 cm

10 cm

10 cm

10 cm

If you intend to mount the monitor to a wall, attach a Wall mounting interface (optional parts) to the back of the set.

When you install the monitor using a wall mounting interface (optional parts), attach it carefully so it will not fall.

1Please, use a wall mount and screws in accordance with VESA Standards.

2If you use screws longer than standard, the monitor might be damaged internally.

3If you use improper screws, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for damage.

4 Please use VESA standard as below. yy785 mm or greater

*Fastening screw: Diameter 6.0 mm x Pitch 1.0 mm x Length 12 mm

CAUTION

yyDisconnect the power cord first, and then move or install the monitor set. Otherwise electric shock may occur.

yyIf you install the monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

yyUse an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the monitor set and void your warranty.

yyUse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

yyTo prevent injury, this apparatus must be securely attached to the wall in accordance with the instrallation instructions. (This only pertains to Australia and New Zealand.)

NOTE

yyThe wall mount kit includes an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.

yyThe warranty will not cover any damages caused by using the product in an excessively dusty environment.

785 mm

ASSEMBLING AND PREPARING 11

	Securing the product to a wall (optional)		WARNING
	(Depending on model)
		brackets and bolts on the back of the product.	or its controls.
		- If there are bolts inserted at the eye-bolts
		position, remove the bolts first.	product is not positioned in a sufficiently
			stable location, it can be potentially
			hazardous due to falling. Many injuries,
			particularly to children, can be avoided by
			taking simple precautions such as:
			»»Using cabinets or stands recommended
			by the manufacturer of the product.
			»»Only using furniture that can safely
			support the product.
			»»Ensuring the product is not overhanging
			the edge of the supporting furniture.
			»»Not placing the product on tall furniture
			(for example, cupboards or bookcases)
			without anchoring both the furniture and
			the product to a suitable support.
			»»Not standing the product on cloth or other
			materials placed between the product
			and supporting furniture.
	1	Insert and tighten the eye-bolts, or product	»»Educating children about the dangers of
			climbing on furniture to reach the product

2 Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear of the product.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

CAUTION

sure that children do not climb on or hang on the product.

NOTE

yyUse a platform or cabinet that is strong and large enough to support the product securely.

yyBrackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer.

yyThe illustration shows a general example of installation and may look different from the actual product.

ENGLISH

ENGLISH

12 REMOTE CONTROL

REMOTE CONTROL

The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly.

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse.

CAUTION

yyDo not mix old and new batteries, as this may damage the remote control.

yyMake sure to point the remote control to the remote control sensor on the monitor set.

(POWER)

Turns the monitor set on or off.

MONITOR ON

Turn on the monitor.

MONITOR OFF

Turn off the monitor.

1/a/A Button

Toggles between numerical and alphabetical.

ARC

Selects theAspect Ratio

Mode.

Volume Up / Down

Adjusts the volume level.

PSM

Selects the Picture Status

Mode.

MUTE

Mutes all sounds.

ENERGY SAVING( )

Adjusts the brightness of the screen to reduce energy consumption.

INPUT

Selects the input mode.

3D

This button selection is not applicable.

Number and Alphabet buttons

Enters numerical or alphabetical characters depending on the setting.

CLEAR

Deletes the entered numerical or alphabetical character.

BRIGHTNESS Key

Adjust the brightness by pressing the Up and Down buttons on the remote control. In USB mode, the OSD menu has the Page function to move to the next file list.

REMOTE CONTROL 13

ENGLISH

INFO

Views the information of the currently program and the screen.

SETTINGS

Accesses the main menus or saves your input and exit menus.

OK

Selects menus or options and confirms your input.

BACK

Allows the user to move back one step in user interaction

function.

Allows you to control various multimedia devices simply by using the remote control through the SimpLink menu.

(It may not be supported depending on the model.)

ID ON/OFF

When the number of Picture ID is equal to Set ID you can control the monitor which you want in the multi display condition.

AUTO

Automatically adjusts picture position and minimizes image instability.(RGB input only)

W.BAL

This button selection is not applicable.

S.MENU

(SuperSign Menu Key)

This button does not apply to

this model.

Navigation Buttons

Scrolls through menus or options.

EXIT

Clears all on-screen displays and returns to Monitor set viewing from any menu.

TILE

This button selection is not applicable.

USB Menu control buttons

Controls media playback.

ENGLISH

14 MAKING CONNECTIONS

MAKING CONNECTIONS

Connect various external devices to the ports on the monitor set’s back panel.

1 Find an external device you want to connect to your monitor set shown on the following illustration.

2 Check the connection type of the external device.

3 Go to the appropriate illustration and check the connection details.

HD Receiver			DVD	VCR

HDMI

HDMI

HDMI

Speaker

USB

PC			Camcorder/Camera			Gaming device

RGB	HDMI	HDMI
HDMI
LAN

NOTE

yyIf you connect a gaming device to the monitor set, use the cable supplied with the gaming device. yyIt is recommended you to use the optional speaker provided.

MAKING CONNECTIONS 15

	Instructions for connecting to PC	RGB Connection

Your monitor supports the Plug & Play* feature.

* Plug & Play: A PC will have a built-in driver for the monitor, no extra software is needed.

NOTE

yyIt is recommended you use an HDMI connection for the best image quality.

yyUse a shielded signal interface cable, such as D-sub 15-pin signal cable and DVI/HDMI cable, with a ferrite core to maintain standard compliance for the product.

yyIf you turn the monitor set on when the set is cold, the screen may flicker. This is normal. yySome red, green, or blue spots may appear

on the screen. This is normal.

yyIf you use a cable longer than the D-sub 15pin signal cable provided, certain images may appear blurry.

Transmits an analog video signal from your PC to the monitor. Connect the PC and the monitor with the 15-pin signal cable as shown an following illustration. Select RGB input. To transmit an audio signal, connect an optional audio cable.

Back of the product.

Macintosh Adapter

(not included)

(not

included)

PC/MAC

CAUTION

yyConnect the signal input cable and tighten it by turning the screws clockwise.

yyDo not press the screen with your finger for a long time as this may result in temporary distortion on the screen.

yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

NOTE

yyUse the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system)

yyApple computers may require an adapter to connect to this monitor. Call or visit their web site for more information.

ENGLISH

ENGLISH

16 MAKING CONNECTIONS

HDMI Connection

Transmits digital video and audio signals from your PC or external device to the monitor. Connect the PC or the external device and the Monitor using the HDMI cable as shown in the following diagrams. Select the HDMI input after connecting.

IR Receiver Connection

Allows the use of a wired remote or IR receiver extension.

Back of the product.

Back of the product.

(not included)

NOTE

yyMake sure the power cable is disconnected.

NOTE

yyUse a High Speed HDMI™ Cable. yyPlease check the PC environment if you

cannot hear audio in HDMI mode. Some PCs require you to manually change the default audio output to HDMI.

yyIf you want to use HDMI-PC mode, you must set the input label to PC mode.

yyWhen HDMI PC is used, a compatiblity problem might occur.

MAKING CONNECTIONS 17

USB Connection

Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the monitor set and access the USB menu to use various multimedia files.

LAN Connection

A Using a router (Switch)

Switch

Monitor

PC

or

B Using the Internet.

Network

Monitor

PC

ENGLISH

ENGLISH

18 USING THE MONITOR

USING THE MONITOR

Using the Input List

1 Press INPUT to access the Input List.

2Press the navigation buttons to scroll to one of the input mode and press OK.

Input mode	Description
RGB	View a PC display on the screen
HDMI	Watch contents in a PC, DVD
	of digital set-top box other high
	definition devices
USB	Plays the multimedia file saved in
	the USB.

Adjusting Aspect Ratio

Resize the image to view the image at its optimal size by pressing ARC while you are watching monitor set.

MODE	RGB	HDMI
Aspect Ratio	PC	DTV	PC
16:9	o	o	o
Just Scan	x	o	x
Set By Program	x	o	x
4:3	o	o	o
Zoom	x	o	x
Cinema Zoom	x	o	x

NOTE

yyYou can also change the image size by accessing the main menus.

yyThe Just Scan mode operates when a video signal has resolution of 720p or higher.

CAUTION

yyIf a fixed image displays on the screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

yyIf you don't use your monitor, turn the power off or set a screen saver program from the PC or the system to prevent image retention.

yyIf the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

	USING THE MONITOR 19
- 16:9 : This selection will allow you to adjust the	- 4:3 : This selection will allow you to view a
picture horizontally, in linear proportion, to fill the	picture with an original 4:3 aspect ratio, black
entire screen(useful for viewing 4:3 formatted	bars will appear on both the left and right of the
DVDs).	screen.

- Just Scan : This Selection will allow you view	- Zoom : This selection will allow you to view the
the picture of best quality without loss of original	picture without any alteration, while filling the
picture in high resolution image. Note: If there is	entire screen. However, the top and bottom of
noise in original Picture, You can see the noise	the picture will be cropped.
at the edge.

JustScan

- Set By Program : Depending on the input	- Cinema Zoom : Choose Cinema Zoom when
signal, screen aspect ratio changes to 4:3 or	you want to enlarge the picture in correct
16:9.	proportion. Note: When enlarging or reducing
	the picture, the image may become distorted.

ENGLISH

Set ByProgram

ENGLISH

20 ENTERTAINMENT

ENTERTAINMENT

Using the Network

Connecting to a Wired Network

Connect the display to a local area network (LAN) via the LAN port as shown in the following illustration and set up the network settings.

Only supports wired network connection. After making a physical connection, a small

number of home networks may require the display network settings to be adjusted. For most home networks, the display will connect to automatically without any adjustments.

For detail information, contact your internet provider or router manual.

WAN

Router

	@
							ETHERNET
				Cable modem
	Internet

CAUTION

yyDo not connect a modular phone cable to the LAN port.

yySince there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.

To set up the network settings: (Even if your display has already connected automatically, running setup again will not harm anything),

1 Press SETTINGS to access the main menus.

2Press the navigation buttons to scroll to NETWORK and press OK.

3Press the navigation buttons to select Network Setting and press OK.

4If you already set network setting, select Resetting. The new connection settings resets the current network settings.

5Select IP Auto Setting or IP Manual Setting.

-If selecting IP Manual Setting, press the navigation and Number buttons. IP addresses will need to be input manually.

-IP Auto Setting: Select this if there is a DHCP server (Router) on the local area network (LAN) via wired connection, the display will automatically be allocated an IP address. If you’re using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be determined.

6 When you are finished, press EXIT.

CAUTION

yyNetwork setting menu will not be available until the display connected to physical network.

yySince there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.

ENTERTAINMENT 21

NOTE

yyIf you want to access the Internet directly on your display, the Internet connection should always be on.

yyIf you cannot access the Internet, check the network conditions from a PC on your network.

yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

yyIf you do not complete the network settings, the network may not work properly.

Tips for Network setting

yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector.

yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.

yyLG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions associated with your internet connection, or other connected equipment.

yyLG is not responsible for problems within your internet connection.

yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed. yySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying

your Internet connection.

yyAny fees charged by an ISP including, without limitation, connection charges are your respon sibility.

yyA 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to connect the display.

yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub scription to one device, this display may not be allowed to connect when a PC is already connected.)

yyThe use of a router may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1 Press SETTINGS to access the main menus.

2Press the navigation buttons to scroll to NETWORK and press OK.

3Press the navigation buttons to select Network Status.

4 Press OK to check the network status.

5 When you are finished, press EXIT.

	Option	Description
	Setting	Return to the network setting menu.
	Test	Test the current network status after set-
		ting the network.
	Close	Return to the previous menu.

ENGLISH

ENGLISH

22 ENTERTAINMENT

Using the My Media

Connecting USB storage devices

Connect USB storage devices such as a USB flash memory, external hard drive to the display and use multimedia features.

Connect a USB flash memory or USB memory card reader to the Display as shown on the following illustration. The My Media screen appears.

or

CAUTION

yy not turn the display off or remove a USB storage device while MY MEDIA menu is activated, as this could result in loss of files or damage to the USB storage device. yyBack up your files saved on a USB storage device frequently, as you may lose or damage the files and this may be not covered by

the warranty.

Tips for using USB storage devices

yyOnly a USB storage device is recognizable. yyIf the USB storage device is connected

through a USB hub, the device is not recognizable.

yyA USB storage device using an automatic recognition program may not be recognized.

yyA USB storage device which uses its own driver will not be recognized.

yyThe recognition speed of a USB storage device may depend on each device.

yyPlease do not turn off the display or unplug the USB device when the connected USB storage device is working. When such a device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.

yyPlease do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction. Only use a USB storage device which has normal music files, image files

or movie files.

yyPlease use only a USB storage device which was formatted as a FAT32 file system, NTFS file system by with the Windows operating system. In case of a storage device formatted with a different utility programme which is not supported by Windows, it may not be recognized.

yyPlease connect power to a USB storage device (over 0.5 A) which requires an external power supply. If not, the device may not be recognized.

yyPlease connect a USB storage device with the cable included by the device maker. yySome USB storage devices may not be sup-

ported or operate smoothly.

yyFile alignment method of USB storage devices is similar to Window XP and the monitor can recognize up to 100 English characters. yyBe sure to back up important files since data stored on a USB memory device may be damaged. We will not be responsible for any

data loss.

yyIf the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source.

-Please use a power adaptor for an external power source.

yyIf your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices.

yyIf a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.

yyIf the USB memory device does not work properly, disconnect and reconnect it.

yyHow fast a USB memory device is detected differs from device to device.

yyIf the USB is connected in Standby Mode, that drive will automatically be loaded when the display is turned on.

yyThe recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.

yyAny device with more than the recommended capacity may not work properly.

yyIf a USB external hard disk with a Energy Saving function does not work, turn the hard disk off and on again to make it work properly.

yyUSB storage devices below USB 2.0 are supported as well. But they may not work properly with videos.

yyA maximum of 999 folders or files can be recognized under one folder.

yyIt is recommended you use a certified USB storage device and cable. Otherwise, a USB storage device may not be detected or a playback error may occur.

yyOnly a USB memory device can be used to play back the files distributed and stored by SuperSign Manager. A USB hard disk or multi-card reader will not work.

yyOnly an FAT 32 file formatted storage device can play back the files distributed and stored by SuperSign manager.

yyA USB 3.0 storage device may not work.

ENTERTAINMENT 23

ENGLISH