Lexicon BOB-32 Parts list
Breakout Box
The Lexicon BOB-32 breakout box converts up to 32 channels of the BLU link digital audio bus to analog
audio. This device is ideal for use with Lexicon’s QuantumLogic™ Immersion processor (QLI-32). The BOB's
outputs are easily configured by six DIP switches located on the rear of the device. This simple configuration
allows selection of 32 consecutive channels from the 256 channels available on the BLU link. Signal present
and power status are clearly displayed by front panel LED indicators.
Features
• Designed to work with Lexicon's
QLI-32 Immersive processor
• 4 DB-25F output connectors
• 256 channels at 48k sampling rate
or 128 channels at 96k sampling rate
• DIP switches for channel range selection
• Clear front panel LED indication
• 1 rack space chassis
• Covered by 3-year warranty
©2015 HARMAN
BLU link DIGITAL AUDIO BUS
Connectors 2 x RJ45 Ethernet
Maximum Cable Length 100 m/300 ft on Category 5e cable
POWER AND DIMENSIONS
Mains Voltage 100Vrms - 240Vrms 50/60Hz
BTU Rating 65 BTU/hour
Operating Temperature Range 5(41) to 35(95) degrees C (degrees F)
Dimensions (H x W x D) 1.75” x 19” x 7.75” (45 mm x 483 mm x 197 mm)
Weight 5.13 lbs/ 2.33 kgs
D/A Latency 28/Fs (0.58ms @ 48K, 0.29ms @ 96K)
ANALOG OUTPUTS
8 balanced outputs per DB-25F Connector.
4 DB-25F connectors for up to 32 balanced channels.
Maximum Output Level +19dBu
Frequency Response 20Hz-20KHz (+0.5dB/-1dB)
THD <0.01% 20Hz to 20kHz, +10dBu output
Dynamic Range 108dB typical, 22Hz-22KHz unweighted
Crosstalk <-75dB
TECHNICAL SPECIFICATIONS
FRONT PANEL LED INDICATORS
OUT
IN
BLU link
CHANNEL
ON
1
SELECT
2 3 4 5 6
Signal/Clip per output, and Power
OUTPUT CONNECTORS
Connector D Connector C Connector B Connector A
CH. 25-32 CH. 17-24 CH. 9-16 CH. 1-8
Breakout Box
Signal/Clip Channel
ON ON OFF 7 193-224
ON ON ON 8 225-256
ON OFF OFF 5 129-160
ON OFF ON 6 161-192
OFF OFF ON 4 97-128
OFF OFF OFF 3 65-96
OFF OFF ON 2 33-64
OFF OFF OFF 1 1-32
Channels
BLU link OFF RAMP
SW1 SSW2 SW3 Selected Bank
Selected
Loading...