La Crosse Technology WT-8008U User Manual

WT-8008U

Atomic Digital Wall Clock

BY

La Crosse Technology, Ltd.

TUwww.lacrossetechnology.comUT

2809 Losey Blvd. S.

La Crosse, WI 54601

Phone [phone]

Page 1 of 12

Table of Contents

TUTable of ContentsUT ............................................... 2

TUCongratulationsUT ................................................... 3

TUFeaturesUT .............................................................. 3

TUImportant InformationUT .......................................... 3

TUManual time setting and other settingsUT ............... 4

TUDaylight Saving TimeUT .......................................... 5

TUSetting the Time Zone:UT ....................................... 5

TUSetting the Daily Alarms:UT .................................... 5

TUAbout the Daily Alarms:UT .................................. 6

TUAutomatic Snooze function:UT ................................ 6

TU°F/°C Temperature Display:UT ................................ 7

TUReception of the WWVB Radio signal:UT ............... 7

TUAbout WWVB Radio Signal Reception:UT .......... 7

TUOnline ResourcesUT ............................................... 8

TUCare and MaintenanceUT ....................................... 8

TUBattery ReplacementUT .......................................... 9

TUTroubleshootingUT .................................................. 9

TUSpecificationsUT .................................................... 10

TUBattery LifeUT ............................................... 10

TUDimensionsUT .............................................. 10

TUPower RequirementsUT ........................................ 10

TUWarranty InformationUT ........................................ 10

Page 2 of 12

Congratulations

You have purchased an atomic digital wall clock
from La Crosse Technology®, providing the
world's most accurate time at a glance. Now
you'll never need to worry about setting your
clock again.

Features

 WWVB Radio controlled Clock (Atomic Clock)
 Time in 12/24 hour format
 Manual time setting option:

"P" – Pacific, "M" – Mountain,
"C" – Central and "E" - Eastern

 Continuous calendar up to year 2054
 Date and weekday displayed and set

automatically with the time

 Temperature display in °F or °C
 Snooze function (5 minutes)
 Indoor Thermometer: Indoor measurement

range: 14.1° F to 139.8° F (-9.9°C to 59.9°C)

 Battery: 2 X “AA” size 1.5V (not included)

Important Information

 Insert 2 new AA, LR6 1.5 volt ALKALINE

batteries into the battery compartment
according to the polarity marked on the case.

 When batteries are inserted, the clock will flash

the display symbols and beep. The clock will
then attempt to find the WWVB clock signal for
up to seven minutes. The tower icon will flash
on the LCD until the WWVB signal is found,
and then it will stop flashing and will display
continuously.

 If the tower icon does not display

continuously - even after seven minutes of
searching - move the clock to another
location and press the "WWVB SEARCH"
key on the back of the clock to search again.
You may need to move the clock away from
sources of interference such as TV monitors
or concrete walls.

Page 3 of 12

 If the automatic setting process is

unsuccessful, use a pointed instrument to
press the "Reset" button on the back of the
clock.

Manual time setting and other settings

 Press and hold down the “SET” button for 2

seconds, the 12/24 hour mode display starts to
flash. Now use “▲” and “▼ “buttons to set the
correct 12/24 hour mode.

 Press “SET” to confirm your setting, the Hour

display starts to flash. Now use “▲” and

“▼“buttons to set the correct hour.

 Press “SET” to confirm your setting, the Minute

displays starts to flash. Now use “▲” and
“▼“buttons to set the correct minute.

 Press “SET” to confirm your setting, the Year

display 2004 starts to flash. Now use “▲” and
“▼” buttons to set the correct year.

 Press SET to confirm your setting, the Month

display starts to flash. Now use “▲” and “▼”
buttons to set the correct month.

 Press “SET” to confirm your setting, the Date

display starts to flash. Now use “▲” and “▼“

buttons to set the correct date. Weekday will
set itself if the clock has received the WWVB
signal.

Page 4 of 12