La Crosse Technology 308-1414W Instruction Manual

Model: 308-1414W/308-1414B

Time &

Sensor

Battery Cover

Sensor Bat tery

SENSOR

LED

TX

FRONT

VIEW

Outdoor

Animated

Instruction Manual

DC: 020816

WIRELESS COLOR WEATHER STATION

Temp +

Trends

Outdoor

Humidity

+ Trend &

Temp

Alerts

Calendar

TX141TH-BV2

Compartment

2 “AA”

Forecast
+ Trends

Indoor
Temp +
Trends

Indoor
Humidity +
Trend &
Temp
Alerts

308-1414B / 308-1414W www.lacrossetechnology.com/support Page | 1

Battery

BACK
VIEW

Battery

AC Power

Base

Compartment

3 “AAA”

Cover

Jack

Stand

GET STARTED

1: Insert the included 5-volt AC power adapter into the weather
station and then into wall outlet.
2 (Optional): Insert 3 new “AAA” batteries (not included) into
the weather station. Observe the correct polarity.
3: Insert 2 new “AA” batteries (not included) into TX141TH-Bv2
sensor. Observe the correct polarity. The red LED will flas h
when transmitting.
4: After 5 minutes, place sensor in a shaded outdoor location.

SET TIME, DATE AND TEMPERATURE UNITS

Note: Only press or hold one button at a time.

1. Hold the TIME SET button 3 seconds to enter time set mode.

2. Press and release the ▼ or ▲ buttons to adjust values.

3. Press and release the TIME SET button to confirm adjustments and
move to the next item.

Settings order:

1. WWVB ON/OFF

2. Time Zone

3. Daylight Saving Time

4.12/24 Hour Time Format

5. Hour

6. Minutes

7. Year,

8. Month

9. Date

10. Fahrenheit/Celsius

308-1414B / 308-1414W www.lacrossetechnology.com/support Page | 2

Press and release the TIME SET button to exit, or wait 20 seconds
without pressing buttons to return to the time display.

SET TEMPERATURE ALERTS

1. Hold the ALERTS button for 3 seconds.

2. The temperature alert value will blink in set mode.

3. Press and release the ▼ or ▲ buttons to adjust alert values.

4. Press and release the ALERTS button to confirm & move to the next
alert.

The temperature alert order:

1. Outdoor High 2. Outdoor Low 3. Indoor High 4. Indoor Low

Press and release the ALERTS button to exit, or wait 20 seconds without
pressing buttons to return to normal time display

ARM / DISARM TEMPERATURE ALERTS

Press and release the ALERTS button to toggle between the alerts
Outdoor HI / Outdoor LOW / Indoor HI / Indoor LOW

• Arm the alert with the ▲button.

• Disarm the alert with the ▼ button.

• ALERT BELL ICON appears when armed.

ACTIVE TEMPERATURE ALERT

• Beeps once per minute with flashing alert bell icon.

• Press any button to stop the alert.

SET TIME ALARM

1. Hold the ALARM button to enter alarm time set mode.

2. Press the ▼ or ▲ buttons to adjust alarm time.

3. Press the ALARM button to confirm adjustments and move to the
next item.

Alarm Time setting order: 1. Hours 2. Minutes

308-1414B / 308-1414W www.lacrossetechnology.com/support Page | 3