Step 1: Insert the 5 volt AC cord (included) into the wall outlet then into the weather
station.
Step 2: Insert the 3 new AAA Alkaline batteries (not included) into the weather station.
Observe the correct polarity.
Step 3: Insert the 2 new AA batteries (not included) into the TX141TH-BV2 remote
sensor. Observe the correct polarity. The red LED will flash during transmission.
Restart: If the remote temperature is not displayed after 3 minutes, unplug the AC
adapter and remove batteries from the weather station & sensor and press any button
20 times. After 15 minutes return to Step 1 above.
Table of Contents
WIRELESS COLOR WEATHER STATION ............................................................................................ 1
Table of Contents ...................................................................................................................................... 2
Features ........................................................................................................................................................ 4
Detailed Setup: Weather Station and Remote Sensor ............................................................... 4
TIME SET Button ........................................................................................................................................... 5
Time Zone ...................................................................................................................................................... 7
Daylight Saving Time Indicator ................................................................................................................. 8
12-hour or 24-hour Time Format .............................................................................................................. 8
Set Time ......................................................................................................................................................... 8
Set Calendar .................................................................................................................................................. 8
Temperature Alerts .................................................................................................................................. 9
Arm/Disarm Temperature Alerts ............................................................................................................... 9
Temperature Alert Sounds .......................................................................................................................... 9
Time Alarm Set ........................................................................................................................................ 10
Heat Index ................................................................................................................................................... 10
Dew Point Temperature ............................................................................................................................. 10
La Crosse Technology® introduces a Wireless Color Weather Station with precise, realtime backyard weather. New – Monitor the mold risk for two separate areas using the
indoor weather station and multi-use remote sensor. Place the remote sensor outdoors to
monitor backyard weather conditions, or use it indoors to monitor high mold risk areas
like in a crawl space or a basement. Animated color forecasts with trends react to
changing barometric pressure. Monitor in/out temperature trends with high and low alert
settings. Measure in/out temperature and humidity with daily min/max records -- all on
one easy-to-read color display with adjustable brightness.
Features
12/24 hr. atomic time (manual setting)
Remote Sensor mold risk display when using sensor indoors (shows with button
press)
Signal strength icon for sensor transmission
Remote humidity (%RH) with trend indicator
IN / OUT remote temperature (°F / °C) with trend
Animated forecast icons
Forecast tendency indicator
Customize IN / OUT temp. alerts (low / high) for weather station and remote sensor
Perpetual calendar (day / month / date / year)
Weather Station mold risk display (shows with button press)
Indoor comfort level based on humidity
Indoor humidity (%RH) with trend indicator
Indoor temperature (°F / °C) with trend
Back light control (high / low / off)
Time alarm
Heat index and dew point
Min. / max. temperature and humidity
Mold Risk (0, LOW, MED, HI)
Station and sensor low battery icon
Atomic reception indicator
Snooze / alarm icon
Detailed Setup: Weather Station and Remote Sensor
STEP 1:
Insert the 5-volt A/C power adapter into the designated area
on the back of the Weather station.
Plug the A/C power adapter into a wall outlet for continuous
The weather station has 5 buttons across the top and 2 on the front.
Slide tab to down and pull out to remove the battery cover.
Insert three new AAA Alkaline batteries into the back of the weather station.
Observe the correct polarity (see marking inside the battery compartment).
The weather station will light up and show indoor temperature, humidity and time.
(Backlight will illuminate for 8 seconds when using only battery power with a
press/release of the SNOOZE/LIGHT button)
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
STEP 3:
Ensure that the transmitter is within 10 feet of the Weather station.
Remove battery cover from transmitter. Slide the battery cover down
and lift off the front.
Insert two new AA batteries into the TX141TH-BV2 transmitter.
Observe the correct polarity.
Within three minutes, the Weather station will show readings in the
outdoor temperature area on the LCD.
Note: Use Alkaline batteries (or Lithium for temperatures below -20°F/-
28.8°C).
Button Functions
▼ (Down) Button
Setting-
Press to decrease values during setting.
Hold 2 seconds to quickly adjust values.
Default Time Display-
Press to display minimum temperature/humidity.
Hold 2 seconds to clear minimum temperature/humidity memory.
Temperature Alert-
Press to disarm alerts
TIME SET Button
Default Time Display-
Press to start or stop a WWVB time signal search
Hold for 3 seconds to set time/calendar, etc.