La Crosse Technology 308-1414 Quick Setup Manual

308-1414B / 308-1414W www.lacrossetechnology.com/support Page | 1

Model: 308-1414

Quick Setup Guide

DC: 100814

WIRELESS COLOR WEATHER STATION

Sensor

Battery Cover

Sensor Battery

Compartment

2 “AA”

SENSOR

TX141TH-B

LED

TX

FRONT

VIEW

Outdoor

Temp +

Trends

Outdoor

Humidity

+ Trend &

Temp

Alerts

Indoor
Temp +

Trends

Indoor
Humidity

+ Trend &

Temp

Alerts

Time &

Calendar

Animated
Forecast
+ Trends

308-1414B / 308-1414W www.lacrossetechnology.com/support Page | 2

GET STARTED

Step 1: Insert the included 5-volt AC power adapter into the weather

station and then plug into wall outlet.

Step 2: Insert 3 new “AAA” Alkaline batteries (not included) into the

weather station. Observe the correct polarity.

Step 3: Insert 2 new “AA” Alkaline batteries (not included) into the

TX141TH-B transmitter. Observe the correct polarity. The red LED will
flash when transmitting.

Restart: If the outdoor temperature is not displayed after 3 minutes,
unplug the AC adapter and remove batteries from the weather station &
transmitter and press any button 20 times. After 15 minutes, return to
Step 1 above.

SET TIME, DATE AND TEMPERATURE UNITS

1. Hold the TIME SET button to enter time set
mode.

2. Press the ▼ or ▲ buttons to adjust values.

3. Press the TIME SET button to confirm adjustments and move to the
next item.

Settings order: 1. WWVB ON/OFF 2. Time Zone

3. Daylight Saving Time 4.12/24 Hour Time Format

5. Hour 6. Minutes 7. Year, 8. Month, 9. Date

10. Fahrenheit/Celsius

Press the TIME SET button to exit, or wait 20 seconds
without pressing buttons to return to the time display.

Battery

Compartment

3 “AAA”

Battery

Cover

AC Power

Jack

BACK
VIEW

Base

Stand

308-1414B / 308-1414W www.lacrossetechnology.com/support Page | 3

SET TEMPERATURE ALERTS

1. Hold the ALERTS button until the station beeps.

2. The temperature alert value will blink in set mode.

3. Press the ▼ or ▲ buttons to adjust alert values.

4. Press the ALERTS button to confirm & move to the next
alert.

The temperature alert order:

1. Outdoor High 2. Outdoor Low 3. Indoor High 4. Indoor Low

Press the ALERTS button to exit, or wait 20 seconds without pressing

buttons to return to normal time display

ARM / DISARM TEMPERATURE ALERTS

Press & release the ALERTS button to toggle between the alerts

Outdoor HI / Outdoor LOW / Indoor HI / Indoor LOW

 Arm the alert with the ▲button.
 Disarm the alert with the ▼ button.
 ALERT BELL ICON appears when armed.

ACTIVE TEMPERATURE ALERT

 Beeps once per minute with flashing alert bell icon.
 Press any button to stop the alert.

SET TIME ALARM

1. Hold the ALARM button to enter alarm time set mode.

2. Press the ▼ or ▲ buttons to adjust alarm time.

3. Press the ALARM button to confirm adjustments and move
to the next item.

Alarm Time setting order: 1. Hours 2. Minutes