La Crosse Technology 308-1412-3TX User Manual
Weather Station
with Three Sensors
Model: 308-1412-3TX
DC: 0401717
For online video support:
http://bit.ly/LaxTechTalk
COMFORT
Table of Contents
Setup
1. Remove the battery cover from all three sensors.
Select a different channel on each sensor.
2. Install 2-AA batteries (not included) into each sensor. The red LED
light will blink when transmitting. Replace battery covers.
Setup ...................................................................................
Button Function Explanation ....................................................
Settings Menu .......................................................................
LCD Features ........................................................................
Custom Weekday | Date Display ...............................................
Writable Display ....................................................................
Atomic Time ..........................................................................
Daylight Saving Time (DST Icon) .............................................
Indoor Comfort Icons .............................................................
HI |LO Temperature/Humidity Records ......................................
Trend Arrows ........................................................................
Sensor Search .......................................................................
Low Battery Icon ...................................................................
Restart .................................................................................
Position Sensors ....................................................................
Visit Us on Social Media ..........................................................
Specications ........................................................................
Care and Maintenance ............................................................
Warranty and Support ............................................................
FCC Statement .....................................................................
1
2
3
4
4
5
5
5
5
6
6
6
7
7
7
8
9
10
10
11
1 2 3
AA
AA
1 2 3
1 2 3
AA
AA
1 2 3
1 2 3
AA
AA
1 2 3
Channel 1 Channel 3
Channel 2
Page | 1 www.lacrossetechnology.com/support 308-1412-3TX
3. Insert 2-AA batteries (not included) into the back of the station.
4. Keep sensors and weather station within 5 feet for at least 15
minutes after installing batteries. This allows the sensor and station
to sync properly and ensures a strong connection.
5. After 15 minutes, place sensors in desired locations (position
sensors page 7).
6. Set time, date, etc.
AA
AA
Button Function Explanation
For better programming instructions, please note these terms for
button use:
• Press: Press and release the designated button.
• Hold: Hold the button for 3 seconds then release the button.
308-1412-3TX www.lacrossetechnology.com/support Page | 2
Settings Menu
1. Hold the SET/MODE button to enter settings mode.
2. Press the +/HI or -/LO button to adjust the ashing values.
3. Hold the +/HI or -/LO buttons to adjust quickly.
4. Press the SET/MODE button to conrm adjustments and move to
the next item.
5. Press the SEARCH button at any time to exit.
Settings menu order:
• Atomic ON | OFF
• DST ON | OFF (Daylight Saving Time)
• Time Zone
• 12H/24H
• Hour
• Minutes
• Year
• Month
• Date
• Temperature Fahrenheit/Celsius
Time Zones
Atomic ON | OFF Time ZoneDST ON | OFF
Format 12Hr | 24Hr Set MinutesSet Hour
Set Year Set DateSet Month
Fahrenheit | Celsius
Page | 3 www.lacrossetechnology.com/support 308-1412-3TX
Loading...