Kyocera FS-C2026, FS-2126MFP ServiceBulletin 2KW-001
Service Bulletin
SB Number:
Subject:
SB 2KW-001
Replacing the DR-590B drive unit
Creation Date: 15/09/2010
Model: FS-C2026MFP/2126MFP
When replacing the DR-590B drive unit please check if 2 pieces of the shim are attached to 1 of the DR-590B
gears. If this is the case, please remove the shims and install the DR-590B.
Remove the shims
Shim position viewed from the right side of
the machine.
Shim position viewed from the left
side of the machine.
Classication
Field measure When replacing the DR-590B drive unit please check if 2 pieces of the shim are attached to 1 of
Serial numbers of affected machines
Type Serial number
FS-C2026MFP/2126MFP August 2010 production
The above mentioned changes have been applied to machines produced after the above mentioned production date.
Entire stock rework
the DR-590B gears. If this is the case, please remove the shims and install the DR-590B.
In-eld modication at next visit
In-eld modication by case
X
No modication necessary
KMIS Service Department, Kyocera Mita Europe A264 / SB 2KW-001
Page 1 of 1
Loading...