Kyocera FS-C2026, FS-2126MFP ServiceBulletin 2KW-015
Service Bulletin
SB Number:
SB 2KW-015
Firmware upgrade/Hardware change (Error code + Added
Subject:
model support)
FS-C2026MFP/2126MFP/2026MFP+/2126MFP+/2526MFP/
Model:
2626MFP
Item Contents
1 Added country code The Russian country code has been added.
2 Error code
CF14A/378
3 Added model support The following models are now supported:
Phenomenon
In rare cases error code CF14A or CF378 may occur.
Cause
This is due to communication failure between the Controller and the Fax board.
Solution
The value of the resistor on the Fax board has been changed, in order to prevent the
disconnected status.
*CF14A/378: error indicated when communication between boards is disconnected
Creation Date: 24/08/2011
FS-C2026MFP+/2126MFP+
FS-C2526MFP/2626MFP
Firmware
Type Program No. Check SUM Version Status Date Applicable model(s)
ENGINE 2KW_1000007004 BFD9 007.004 30/03/2011 FS-C2026MFP/2126MFP
MAIN 2KW_2F00006002 ---- 006.002 ---------- FS-C2026MFP
MAIN 2KX_2F00006002 ---- 006.002 ---------- FS-C2126MFP
SCANNER 2KW_1200007001 ---- 007.001 11/12/2010 FS-C2026MFP/2126MFP
FAX BOOT/APL 2KX_5500005003 ---- 005.003 ---------- FS-C2126MFP
Firmware notes *: BOOT: 2KX_5000005003 / APL: 2KX_5100005003
Classication
Field measure When the above mentioned phenomenon occurs, please upgrade the rmware to the latest
Parts
Entire stock rework
version.
In-eld modication at next visit
In-eld modication by case
No modication necessary
X
No. Old Parts
No.
1 302KX94040
2KX94040
KMIS Service Department, Kyocera Mita Europe B126 / SB 2KW-015
New Parts
No.
302KX94041
2KX94041
Description Q’TY Interchange-
ability
Old New Old New
PARTS FAX UNIT E SP 1 1 O O FS-C2026MFP+/
Page 1 of 1
Applicable model(s)
2126MFP+/2526MFP/
2626MFP
Loading...