Kyocera FS-C2026, FS-2126MFP ServiceBulletin 3LJ-0001-A299

round by adding a rib

.

Subject

Model

<Date> September 10, 2010

Service Bulletin Ref. No.

3LJ-0001 (A299)

Change of the Part for Operation Safety
(Shape Change of the GUIDE LOOP)
FS-1028MFP, FS-1128MFP, FS-C2026MFP, FS-C2126MFP,
DP-110

Topic

The GUIDE LOOP on the paper feed section of the DP-110 had a sharp edge. Therefore, the corner was
rounded by adding a rib to secure safety. The part number remains unchanged.

[DP-110]

KMC’s Classification

In-Field modification by case No modification necessary

Field Measure: No particular problem is expected.

Entire Stock Rework In-Field modification at next visit

GUIDE LOOP

[Before] [After]

Sharp edge is changed to

(Page.1/1)

Serial Nos. of the Affected Machines: From September 2010 production

Please note that this information is subject to change.

KYOCERA MITA Europe B.V.

European Service & Development Center (ESDC)