Kyocera FS-C2026, FS-2126MFP ServiceBulletin 2KW-002
Service Bulletin
SB Number:
Subject:
SB 2KW-002
Firmware upgrade
Creation Date: 15/09/2010
Model: FS-C2026MFP/2126MFP
Applicable rmware Contents
1 Engine The toner gauge is detected as 100%, after sleep mode recovery when the top cover is
opened or closed during sleep mode.
2 Paper jam 0100 may be improperly detected if data is printed directly after the developer
refresh.
3 The developer frequency and voltage control between pages have been changed, for
machines that do not operate in high altitude mode.
4 System Support has been added for the change of the colour conversion table.
5 Scanner Certain paper jams may occur, when the cover is opened during the initial DP drive.
6 The leading edge scanning timing error for monochrome printing may occur.
7 It is no longer necessary to set the original again after the machine recovers from sleep
mode.
Firmware
Type Program No. Check SUM Version Staus Date Applicable models
ENGINE 2KW_1000003003 9b1c 003.003 26/07/2010 FS-C2026MFP/2126MFP
SYSTEM 2KW_2F00001131 ---- 001.132 FS-C2026MFP
SYSTEM 2KX_2F00001131 ---- 001.132 FS-C2126MFP
SCANNER 2KW_1200004001 28FE 004.001 13/07/2010 FS-C2026MFP/2126MFP
Classication
Field measure When the above mentioned phenomena occur, please upgrade the rmware to the latest version.
Serial numbers of affected machines
Type Serial number
FS-C2026MFP Q5A0800419
FS-C2126MFP Q5E0800467
Machines produced after the above mentioned serial numbers, should be affected by the above mentioned changes.
Entire stock rework
In-eld modication at next visit
In-eld modication by case
No modication necessary
KMIS Service Department, Kyocera Mita Europe A289 / SB 2KW-002
Page 1 of 1
Loading...