Kyocera FS-C2526, FS-C2026, FS-2626, FS-2126MFP ServiceBulletin 2KW-026

Service Bulletin

SB Number:

Subject:

SB 2KW-026

Colour dots on the print-out

Creation Date: 02/02/2012

FS-C2026MFP/2126MFP/2026MFP+/2126MFP+/2526MFP/

Model:

2626MFP

Phenomenon Colour dots may appear on the print-out.

Solution 1. The Photo-conductive treatment of the Drum has been changed.

2. The Firmware has been upgraded.

3. To recognize the latest type of the Drum unit, a black dot (Diameter: 9mm) has been
applied to the Packing material.

Example of colour dots on the print-out.

Parts

No. Old Parts

No.

1 302KV93013

2KV93013

Classication

Field measure When the above mentioned phenomenon occurs, please replace the Drum unit with the latest

Serial numbers of affected machines

Type Serial number

FS-C2026MFP/2126MFP/2026MFP+/2126MFP+/
2526MFP/2626MFP

The above is the plan at the present moment. Please note that there is a possibility of change after giving this
information.

New Parts
No.

302KV93014
2KV93014

Entire stock rework

type and upgrade the Engine Firmware to the latest version.

Description Q’TY Interchange-

DK-590 1 1 X O

In-eld modication at next visit

Planned from June 2011 production*.

In-eld modication by case

X

ability

Old New Old New

No modication necessary

KMIS Service Department, Kyocera Mita Europe B215 / SB 2KW-026

Page 1 of 3

Service Bulletin

Firmware changes

Item Contents

1 Measures against the Colour

dots.

2 Band image on the Drum. Band image may be formed between Colour calibration and Colour

3 Drum refresh mode. The Drum refresh mode has been added.

Firmware for the FS-C2026MFP/2126MFP

Type Program No. Check SUM Version Status date Applicable model(s)

ENGINE 2KW_1000009003 018F 009.003 10/06/2011 FS-C2026MFP/2126MFP

MAIN 2KW_2F00006002 ---- 006.002 --------- FS-C2026MFP

MAIN 2KX_2F00006002 ---- 006.002 --------- FS-C2126MFP

SCANNER 2KW_1200007001 ---- 007.001 11/12/2010 FS-C2026MFP/2126MFP

FAX BOOT/APL 2KX_5500005003 ---- 005.001 --------- FS-C2126MFP

1. Weak main charge may be impressed during the “Adding toner“ message.

2. Weak main charge may be impressed after setting up the machine.

registration adjustment.

Notes: Please upgrade all the Firmware to the latest version at the same time.
Fax boot/APL contents: Boot (2KX_5000005003) / APL (2KX_5100005003)

Firmware for the FS-C2026MFP+/2126MFP+/2526MFP/2626MFP

Type Program No. Check SUM Version Status date Applicable model(s)

ENGINE 2KW_1000009003 018F 009.003 10/06/2011 FS-C2026MFP+/2126MFP+/

2526MFP/2626MFP

MAIN 2M8_2F00001043 ---- 001.043 --------- FS-C2526MFP

MAIN 2M9_2F00001043 ---- 001.043 --------- FS-C2626MFP

MAIN 2MA_2F00001014 ---- 001.014 --------- FS-C2026MFP+

MAIN 2MB_2F00001014 ---- 001.014 --------- FS-C2126MFP+

SCANNER 2M9_1200001016 ---- 002.001 --------- FS-C2526MFP/2626MFP

SCANNER 2MB_1200001017 ---- 002.001 --------- FS-C2026MFP+/2126MFP+

FAX BOOT/APL 2KX_5500005003 ---- 005.003 --------- FS-C2126MFP+/2626MFP

Notes: Please upgrade all the Firmware to the latest version at the same time.

KMIS Service Department, Kyocera Mita Europe B215 / SB 2KW-026

Page 2 of 3