Kyocera FS-3040, FS-3140MFP Service Bulletin 2LW 007

Service Bulletin

SB Number:

Subject:

SB 2LW-007

Firmware upgrade (Main v007.010)

Creation Date: 04/03/2011

Model: FS-3040MFP/3140MFP

Item Contents

1 Added functions to the

job expansion function.

2 Added maintenance

mode U252

3 Failure to recognize the

SCM Co. ID card reader

4 Kereberos authentication The Kereberos authentication from the MFP may fail when the expiration date of the

The following functions have been added to the job expansion function at the next
screen of the job storage:

1. “Proof and hold”

2. “Private print”

3. “Ram disk” has been added to the driver.

Maintenance mode U252 (Destination setting) has been added.

The SCM Co. ID card reader may not be recognized when turning ON the main
switch, while placing the ID card on the SCM Co. ID card reader.

user account approaches.

Firmware

Type Program No. Check SUM Version Applicable model(s)

ENGINE 2LW_1000.003.003 ---- 003.003 FS-3040MFP/3140MFP

MAIN 2LW_2F00.007.010 ---- 007.010 FS-3040MFP

MAIN 2LX_2F00.007.010 ---- 007.010 FS-3140MFP

FAX BOOT/APL 2H9_5500.003.003 ---- 003.003 FS-3140MFP

Classication

Field measure Please upgrade the rmware to the latest version to implement the above mentioned changes.

Serial numbers of affected machines

Type Serial number

FS-3040MFP/3140MFP February 2011 production.

The above mentioned changes have been applied to machines produced after the above mentioned production date.

Entire stock rework

In-eld modication at next visit

In-eld modication by case

X

No modication necessary

KMIS Service Department, Kyocera Mita Europe B063 / SB 2LW-007

Page 1 of 1