Kyocera FS-3040, FS-3140MFP Service Bulletin 2LW 0012 B410

to the residual amount

container was

message is based on the count where the toner

residual toner inside

increased in order

to stabilize the toner low

detec

tion.)

Check

SUM

Current

Ver.

Service Bulletin Ref. No.

Subject

(Page.1/2)

2LW-0012 (B410)

<Date> November 18, 2011

Firmware Upgrade (Engine: Ver. 005.002)

FS-3040MFP_FS-3140MFP_v.08.00.0040_(2011-02-07)

Model

FS-3040MFP, FS-3140MFP

Topic

The firmware was upgraded as follows.

Content of Changes

No. Item Details

Measures against the

1

erroneous display of
“Toner low” message

2 Change of the SC5100

error detection

The toner low detection was changed according
since “Toner low” might be displayed right after toner
installed.

(Indication of “Toner low”
low is regularly detected. However, if the amount of
the toner container is high, the count to show this message will be

The SC5100 error detection was changed to the same manner of the

conventional models.

<Note>
The message “Replace toner” may appear if toner inside the developer unit is clustered on one side because of
move of the machine or due to detachment/attachment of the developer unit for jam clearance even after the
engine firmware was upgraded. In this case, however, the message can be cleared by closing the top cover after
once opening it or turning the power OFF and ON.

Program No.

ENGINE 2LW_1000005002 A1EC 005.002 2011/10/19 004.001

MAIN 2LW_2F00008003 - 008.003 - - FS-3040MFP

MAIN 2LX_2F00008003 - 008.003 - - FS-3140MFP

SCANER 2LW_1200002001 - 002.001 2011/6/10 -

Optional language KR 2LW_81KR001015 - 001.015 - - For KMKR

Optional language TW 2LW_81TW001013 - 001.013 - - For KMTW

Optional language BR 2LW_81BR001015 - 001.015 - - For KMBR

Optional language CN 2LW_81CN001012 - 001.012 - - For KTST

FAX BOOT/APL 2H9_5500008001 - 008.001 - - Except KTST

FAX BOOT/APL 2H9_5700N05001 - N05.001 - - For KTST

For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware to the latest version at the same
time.

Ver. Status Date

Remark

CTL FW

575682

ENGINE

571970

ENGINE

←←←← New upgrade

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

Service Bulletin Ref. No.

KMC’s Classification Entire Stock Rework In-Field modification at next visit

Field Measure: Please upgrade the firmware when the problem described above arises.

Serial Nos. of the Affected Machines: Engine: From available timing in the November 2011* production

(Page.2/2)

2LW-0012 (B410)

<Date> November 18, 2011

In-Field modification by case No modification necessary

Also, please explain your users the content of <Note> above.

*The above is the plan at the present moment. Please note that this information is subject to change.

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.