Kyocera FS-3040, FS-3140MFP Service Bulletin 2LW 002

Service Bulletin

SB Number:

Subject:

SB 2LW-002

Firmware upgrade

Creation Date: 15/09/2010

Model: FS-3040MFP/3140MFP

Phenomenon Error code C0180 may appear after replacing the main board.

Cause The above mentioned phenomenon occurs when the serial numbers stored in the engine and

main board do not match.

Solution Maintenance mode U004 (Setting the machine number) has been added, in order to change the

serial number in the engine board to the same number as in the main board.

Firmware

Type Program No. Check SUM Version Status Date Applicable models

ENGINE 2LW_1000.002.001 c43f 002.001 04/06/2010 FS-3040MFP/3140MFP

MAIN 2LW_2F00.003.001 ---- 003.001 ---------- FS-3040MFP

MAIN 2LX_2F00.003.001 ---- 003.001 ---------- FS-3140MFP

FAX 2H9_54000003003 ---- ------- ---------- FS-3140MFP

Classication

Field measure When the above mentioned phenomenon occurs, please upgrade the rmware to the latest

Serial numbers of affected machines

Type Serial number

FS-3040MFP Not available

FS-3140MFP Q8L0701556

The above mentioned changes have been applied to machines produced after the above mentioned serial number.

Entire stock rework

version.

In-eld modication at next visit

In-eld modication by case

No modication necessary

KMIS Service Department, Kyocera Mita Europe A258 / SB 2LW-002

Page 1 of 1