Kyocera FS-3040, DP-110, DP-100, FS-1028, FS-3140MFP Service Bulletin 2JB-012

Service Bulletin

SB Number:

Subject:

SB 2JB-012

Improving the adhesive material of the pad front SEP

Creation Date: 15/09/2010

KM-2540/3040, FS-1028MFP/DP, FS-1028MFP/3040MFP/

Model:

3140MFP, FS-C2026MFP/2126MFP, DP-110/420/670/670(B)

Affected models: DP-110 FS-1028MFP/DP, FS-1028MFP/1128MFP/3040MFP/3140MFP,

FS-C2026MFP/2126MFP

DP-420 TASKalfa180/220/181/221

DP-670 KM-2540/3040/2560/3060

DP-670 (B) KM-2540/3040/2560/3060, TASKalfa300i

Phenomenon The pad front SEP may disengage from the paper feed guide (upper guide B).

Cause When removing the original to clear a paper jam at the DP, the pad front SEP may peel off.

Solution To improve the adhesive strength, the material of the double faced tape surface of the

pad front SEP has been changed from 5000NS to TW-Y01 type.

Parts

No. Old Parts

No.

1 303K507101

3K507101

New Parts
No.

303K507102
3K507102

Pad front SEP

Description Q’TY Interchange-

ability

Old New Old New

PAD FRONT SEP 1 1 O O O

SP

Classication

Field measure When the above mentioned phenomenon occurs, please replace the pad front SEP with the latest

KMIS Service Department, Kyocera Mita Europe A274 / SB 2JB-012

Entire stock rework

type.

In-eld modication at next visit

Page 1 of 2

In-eld modication by case

No modication necessary

X

Service Bulletin

Serial numbers of affected machines

Type Serial number

FS-1028MFP/DP,
FS-1028MFP/3040MFP/
3140MFP, FS-C2026MFP/
2126MFP, KM-2540/3040

Machines produced after the above mentioned production
date, should not have the above mentioned
phenomenon.

August 2010 production.

Serial numbers of affected units

Type Serial number

DP-420/670 Not available.

DP-110/670(B) August 2010 production.

Units produced after the above mentioned production
date, should not have the above mentioned
phenomenon.

KMIS Service Department, Kyocera Mita Europe A274 / SB 2JB-012

Page 2 of 2